Search results

Search the forum Search Articles
  1. jakhamr81

    Problem with LC 30-06 Brass

    That could be. I'm using a standard die. I'll have to look into the length after work this evening.
  2. jakhamr81

    Problem with LC 30-06 Brass

    75 and once fired I'm assuming. It still had the red seal around the primer. I should mention that I'm only using Hornady One-Shot case lube, same amount on both brands.
  3. jakhamr81

    Problem with LC 30-06 Brass

    I'm using an RCBS full length die that's giving me problems resizing LC brass. It works perfectly fine with Winchester and other brands but with LC brass the shoulder is pushed further back. I'm assuming because of the extra thickness. Is there a die that's better suited for military brass? Pic...
  4. jakhamr81

    SPF 870 Youth

    to the top
  5. jakhamr81

    SPF 870 Youth

    Back up
  6. jakhamr81

    SPF 870 Youth

    I have a barely used Remington 870 youth model in 20 gauge with synthetic stock and removable choke. Barrel, receiver, and magazine tube have been coated olive drab with KG Gun Kote. Barrel is 18"; shoots 2 /34 or 3" shells. I bought this new for my wife about 10 years ago. She shot it one time...
  7. jakhamr81

    WTS or Trade 6.5 Creedmoor brass for 30.06

    Would trade for 100 pieces of 30-06 or sell for $55 shipped.
  8. jakhamr81

    Searching for a USMC 03 Sight Cover

    These are pictures of Bill Bentz's aftermarket sight cover. The original design is pretty common but obscures the sight picture. I have to take mine off to shoot. The USMC developed a larger cover that should allow the shooter to still see the target with the cover on.
  9. jakhamr81

    Searching for a USMC 03 Sight Cover

    Thanks, just heard back from Bill Bentz with his price list. I'll be putting together an order with him.
  10. jakhamr81

    Searching for a USMC 03 Sight Cover

    Anyone know where to find an over-sized USMC style sight cover for a 1903? I tried ordering one from Numrich but they sent me a standard size. Thanks
  11. jakhamr81

    CMP M1

    Thanks. I can't say for certain if it's a true sub moa gun. I only put about 40 rounds through it. At 100 groups were closer to 3 or 4 moa but at 200 and 300 yards I had a few sub moa groups on steel. Either way it's definitely a keeper.
  12. jakhamr81

    CMP M1

    I was inspired to finally buy a service grade M1 Garand from CMP by a thread on here last month. It showed up last week and I sure lucked out with a Springfield made in January of 45. All parts are period correct SA except for the op rod and barrel. Barrel is November of 63 and the tag said the...
  13. jakhamr81

    WTS or Trade 6.5 Creedmoor brass for 30.06

    Still looking to trade
  14. jakhamr81

    WTS or Trade 6.5 Creedmoor brass for 30.06

    168s, 175s, or 178 ELD-X
  15. jakhamr81

    WTS or Trade 6.5 Creedmoor brass for 30.06

    Back up, doesn't need to be a 1 for 1 swap, let me know what you have.
  16. jakhamr81

    WTS or Trade 6.5 Creedmoor brass for 30.06

    I have 344 pieces of mostly Hornady brass and about 20 pieces of Federal. 178 pieces 2x fired, primed with Wincester primers and turned necks. 75 pieces of 2x fired and turned necks 91 pieces of 1x fired Would like to trade for 30.06 brass and/ or .308 bullets. Would sell for $65 shipped
  17. jakhamr81

    Pre-64 Short Action Question

    I bought a Winchester Pre 64 that was re-chambered in .308. The rifle has the standard long action magazine box but has the short action bolt stop and ejector. If I want to use the clip slot to feed would I only need to replace the bolt stop and extractor or do I also need to change the...
  18. jakhamr81

    What do I have here? Warning to Collectors

    I was able to get a refund and now I see he has it listed on Gunbroker https://www.gunbroker.com/item/799965145
  19. jakhamr81

    What do I have here? Warning to Collectors

    Looks like it may have been sanded down and restamped. On closer inspection I can even see the original "S". The receiver is also two thousandths thinner than my 1903A3. I don't care if someone refinishes, rebarrels, or rebuilds a gun. But when they go to great lengths to counterfeit it...
  20. jakhamr81

    What do I have here? Warning to Collectors

    Yeah, that's no where near Arkansas.
Top Bottom
Back
Home
Forums
Merch
Alerts