Search results

  1. RADcustom

    over tumbled brass?

    What are you tumbling with? Corn cob or walnut, I wouldn't worry about it but, if you are using stainless steal media, I would inspect your case mouths carefully.
  2. RADcustom

    Effective Immediately, No Politics Period !

    I will only vote for him if his first order of business is to fully pardon NOBODY.
  3. RADcustom

    Does a Spuhr Mount need LAPPING?!!!

    Wait, don't these mounts have threaded holes in the ring caps for set screws, so you can lock everything down once it is in place?
  4. RADcustom

    Missing hole on B&C stock?

    I think a picture would be appropriate.
  5. RADcustom

    Color matching remington 700 matte blue

    Just re-coat the whole thing.
  6. RADcustom

    Feeding problems with AI Arctic Warfare

    Have you tried putting pressure on the bottom of the magazine while working the bolt. Perhaps the mag catch is a little short?
  7. RADcustom

    Distance for 175 vs 168

    If you want to make it easy on yourself, try the Lapua 155 Scenar. It has become my bullet of choice for 308.
  8. RADcustom

    Pellet rifle out to 1000

    What was your holdover?
  9. RADcustom

    I am creating a.308 BDC reticule and can use your guys help.

    .508 advertised but, .493 at that speed according to Bryan Litz
  10. RADcustom

    I am creating a.308 BDC reticule and can use your guys help.

    Have you thought about making it for a 155gr Scenar @ 2950?
  11. RADcustom

    Remington 788 build?

    I don't think it would be as simple as a bolt swap. The 22-250 was unique in action length and magazine. It is not the same as the 308/7-08/243/6mm actions. You will need to stick to a similar length cartridge. A 6xc would be my first choice.
  12. RADcustom

    .260 brass forming

    It would depend on how hot you intend to run your loads. That brass will last through many reloadings if you don't loosen the primer pockets.
  13. RADcustom

    .260 brass forming

    Winchester 7-08 is the most popular but, since Lapua began making it, what's the point? Redding dies.
  14. RADcustom

    Oh How it's changed

    I got many laughs from Captain Kickass and his exchanges with Frank. Lindy was a wealth of knowledge even though it took me reading what he wrote at least two, sometimes three times to understand it.
  15. RADcustom

    Oh How it's changed

    I remember when a dumb question was posted it was answered by NOBODY. It usually involved some entertainment and some nice pictures of dead meat.
  16. RADcustom

    6-6.5x47 AW mags?

    Mine feed like butta through my Badger action.
  17. RADcustom

    Laupa brass?

    Open the box, prime, load and shoot.
  18. RADcustom

    Badger Ordnance M2008 Gen 2

    I have no complaints now. The first generation (serial number <100) had some issues that had to be worked out. As mentioned, they weigh a pound more than a Surgeon. Don't coat the bolt unless you polish it down some. The long rail can limit the placement of a shorter scope like a Hensoldt. Other...
  19. RADcustom

    My First Long Action, 280 Remington?

    pwc001 had one that fed from a Wyatt's detachable mag system without issue. I'm sure the AICS mags would have done just as well. It is an impressive combination.
  20. RADcustom

    My First Long Action, 280 Remington?

    You might also consider a 280 Ackley. It will do everything you are requiring and Nosler makes brass so there is no fire forming.