Search results

Search the forum Search Articles
  1. SupressYourself

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    IMO, rattle can is a bit "ghetto" for such a fine instrument. I used Duracoat and an air brush. I don't recall it being any more difficult to paint than any other gun. Take the skins off, clean it up good (I use brake cleaner), rough it a bit with fine steel wool or similar, and mask off...
  2. SupressYourself

    *OOPS! Mixed 1 lb. of RL23 & H4350... Will I blow my face off?

    The correct answer is toss it or use it for some homemade fireworks. Even if you could make it work, you'd have to burn up a bunch of components just to figure out a load that you could never replicate.
  3. SupressYourself

    7mag help

    That's good, but I have a feeling when that new brass becomes once fired, you may have problems again. I would try to give the chamber a polish as others suggested.
  4. SupressYourself

    7mag help

    I had this exact same problem with a new 7mm R700 a few years ago. I sent it in to Remington and they fixed it, although they didn't say how. -- I assume they polished the chamber. I know they did not replace the barrel. The problem occurred with both factory Federal and my Hornady brass...
  5. SupressYourself

    Optics Bering Optics On Hand

    @Coyote Kev
  6. SupressYourself

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Are the primers on your reloads sitting below flush, or a little above?
  7. SupressYourself

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    odd... you're the only guy I've ever seen even hint at the idea that the SRS trigger is less than excellent. I know you didn't say it was garbage, but your lack of enthusiasm seems to be the outlier in the bunch. I have a lot of nice aftermarket triggers on other rifles, and I can't see...
  8. SupressYourself

    Suppressors First round flyers

    Update. I had the same problem with my 22-250 using H4895 and Varget, both pushing the 53 V-max. For example: This only happens with my 223 can. When I put on the 30 cal can, there's no issue. Of course the answer is "just use the 30 cal can dummy". Well yeah, I can do that, but I really...
  9. SupressYourself

    scheels legit?

    Too legit to quit. Come on, someone had to...
  10. SupressYourself

    Chassis right or left

    Trust me, you'll be so much happier with a lefty rifle, and it won't take long to get used to it. I'm right handed and left eye dominant. I grew up shooting right handed because that's all we had and all you could get. I was in my 20s before I made the switch and haven't looked back. --...
  11. SupressYourself

    22-250 Best Bullet Weight for a 1/14 twist

    Just about anything will work on the minimum side, but you'll be limited to about 55 grains on the maximum side for conventionally shaped bullets. For VLD / ELD style bullets, the maximum will be less, maybe only 50 grains. For example, Hornady says the 53 grain V-max needs 1-12 or faster to...
  12. SupressYourself

    The ATF responds to Solvent Traps Made by Diversified Machine

    Curious: What was Diversified Machine doing different than other "solvent trap" companies to draw the ire of the ATF? Were the "baffles" pre-drilled or something?
  13. SupressYourself

    The ATF responds to Solvent Traps Made by Diversified Machine

    No one with a suppressor "poses much of a threat". These bullshit laws only exist out of pure ignorance.
  14. SupressYourself

    Savage Impulse seems to be rarer than unicorn teeth. Has anyone bought one?

    I get that, but since they make it in a 22-250, and that's what I want, seems like the one to get. I don't think a factory 308 take off barrel would fetch much in resale.
  15. SupressYourself

    Savage Impulse seems to be rarer than unicorn teeth. Has anyone bought one?

    I'd be into it if it was the Predator model in 22-250
  16. SupressYourself

    Hunting & Fishing Coyote Calling

    Ok. I maintain you'd have better luck pulling them up that tree line. Coyotes come better if they feel like the have cover on their approach, even at night. As for the dog food, you may find other critters like deer, raccoons, squirrels, and such eat most of it.
  17. SupressYourself

    Black collar arms straight pull bolt gun?

    Ok, well... the point is that they didn't make this rifle just for you, So while you dont see a point, others do.
  18. SupressYourself

    Black collar arms straight pull bolt gun?

    Try running a suppressed AR under 0 degrees F. I dont care how much or little of what lube you use. It ain't long before you have a mess.
  19. SupressYourself

    BCG for an AR10 in 6.5 creedmoor?

    I recommend the JP high pressure bolt. I have no opinion on the carrier. If you're shooting suppressed, you'll want an adjustable gas block.
  20. SupressYourself

    Has anyone ever seen this in a new AR chrome lined barrel?

    That barrel looks like ass. I believe the reddish stuff is rust. Even the "nicer" areas have significant tooling marks. This probably isn't a high-dollar precision barrel, but still... But all these bore scope threads go the same way: Some people will tell you to quit being a bitch and just...
Top Bottom
Back
Home
Forums
Merch
Alerts