Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
New Contest Starting Now! This Target Haunts Me
Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!
You’re running 2720 mv which pushes your wind bracket to a 5 mph
Your wind would be 2.4 at 1750 based on a 3600 ft DA
Process:
Go into environment and turn off Spin drift and set latitude to 0 so you get a pure wind bracket
Set range to 500 yards
Set wind direction to 3:00 or 9:00
Increase...
In the kestrel you’d select your gun profile and push the center button to enter the gun sub menus. You then select “mv” and push the center button. You’ll be in the mv calibration menu where you’ll enter the range of your target and what the point of impact was
If you’re referring to kestrel...
I can just see people refilling their blood pressure meds having to manually enter all the inputs of a ballistic solver on an Apple watch face that measures 44 mm ;)
MK Machining and Wiser Precision both make magneto speed mounts that mount to your rail and extend to the end of the barrel without mounting them directly to the barrel.
https://mkmachining.com/product/magnetomount/
https://wiser-precision.myshopify.com
You can also treat the magnetospeed as...
G1 =.548 Norma published average
G7 =.288 Norma published average converted to a G7 average (G1 BC multiplied by .512)
G1 = .576 AB published average
G7= .295 AB published average
G1 has been used longer so it’s the default scale they publish most of the time. Most of the time people pick...
They are accounting for it in the MV calibration.
I can’t speak to why they chose to do it that way in the Kestrel compared to the app.
You might be able to account for it in the “Zero Height” “Zero Offset” inputs
Out of curiosity do you have the following info available?
Sight height?
(Wind info)
Did you zero your rifle in the 7-10 mph wind?
Is the position you zeroed at blocked from the wind?
Was there 7-10 mph blowing when you shot at 784?
(Zero)
What was your zero distance?
What was...
You wouldn’t see the problem in StrelokPro because Coriolis wasn’t turned on so it wouldn’t present you a solution with Coriolis accounted for if it was present when you recorded your dope. Your dope would match StrelokPro because you would’ve dialed the .1 mils into your 1300 yd zero when you...
Were you entering a DOF in the example where your elevation was .2 mils higher?
The reason I ask is because at 1300 yd you’d see .1 mil high if you were facing E 90* and another .1 high for a 10 mph wind from 3:00 for a total of .2 mil
Upgrading would just give you more features.
My 6.5 running 130 gr at 2900 gives me .1 shift every 8 mph so it would take a 16 mph wind to push me to .2 mils high.
Are you using the DOF capture in addition to the wind capture?
If you want an Elevation Hold that doesn’t change with your wind 1 input then yes.
You can find out how much AJ would affect your elevation hold by setting your range on the kestrel to 100 yards (your zero) and increase the wind 1 (either from 9:00 or 3:00) input until you see you Elevation...
Use Wind 2. Wind 1 calculates the AJ. AJ would occur in the first 30 yards
if the wind is obstructed from your flight path in the 1st 30 yards then you shouldn’t see an AJ shift down range