• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. F

    .308 load for a Remington 700

    Varget, RL15 and IMR 4064 are my go to powders in 308W. Do a ladder test to get best results.
  2. F

    what .243 powder?

    H4350 Win Brass Fed 210M Do a ladder test for your rifle for best load results.
  3. F

    Gunsmithing Does anyone stock Stiller Actions?

    http://bugholes.com/index.php?route=product/category&path=88_97_98 This guy does, But just like everything else he is out of stock. Sorry I can't help more.
  4. F

    260 Loads Only

    Re: 260 Loads Only My load and seems to be close to everybodys sweet spot. Krieger 25" 142 SMK .005 from Lands Norma Brass H4350 at 42.8gr Fed210M 2815FPS
  5. F

    260 speed issue

    Re: 260 speed issue My load and seems to be close to everybodys sweet spot. Krieger 25" 142 SMK .005 from Lands Norma Brass H4350 at 42.8gr Fed210M 2815FPS
  6. F

    Varget w/ 178's and H1000 w/208's. Ladders and Q's

    Re: Varget w/ 178's and H1000 w/208's. Ladders and Q's Did you see pressure sighns at 76.5. Load data on Hodgdons says you can go to 78gr. My Node with 208 Amax was at 77.5gr. I went to 78.5 with no presssure. I was happy at 2900fps so I stopped. You are on the right track. If are happy at...
  7. F

    Ladder results

    Re: Ladder results I agree with Rover31. I do mine at 450 or 500 yards. But load in between 6 and 7 look like it might be a Node with the way your MV and target look. I call a redo. Do the test a couple times just to see if it repeats same data.
  8. F

    What moa base for 300wm 1000yd & vortex pst?

    Re: What moa base for 300wm 1000yd & vortex pst? Liberty optics has 30moa Seekins base for $109. I like the bases and rings. He is out of stock as of now on 20moa so I told him to change my order to the 30moa. I wanted it for my 260rem but will now put the 30moa to my 300wm and use the 20moa...
  9. F

    What moa base for 300wm 1000yd & vortex pst?

    Re: What moa base for 300wm 1000yd & vortex pst? You may not need a canted base to get to a 1000. But 20moa will get you past 1000 for sure.
  10. F

    sierra 220smk 240smk bullet length?

    Re: sierra 220smk 240smk bullet length? http://www.jbmballistics.com/ballistics/lengths/lengths.shtml Here ya go
  11. F

    Your thoughts on my ladder test results?

    Re: Your thoughts on my ladder test results? On your color coding, use white butcher paper or buy a roll of blue print paper. I do this all the time. Works GREAT! I shoot 3 or 4 rounds and go mark the target with the color and charge so there is no confusion. I use colored sharpies. Some...
  12. F

    My first Krylon'd AR15

    Re: My first Krylon'd AR15 How did you do the numbers on the scope?
  13. F

    Photos JC Steel Targets

    Re: JC Steel Targets I bet it's Duke Energy and hopefully that is steam and not smoke. :-)
  14. F

    rifle for deer hunting in indiana

    Re: rifle for deer hunting in indiana Look an Aj Brown for a 358 Hoosier. This is what you are looking for.
  15. F

    Gunsmithing suppressor cerakote

    Re: suppressor cerakote Don't meant to hijack. Does the coating hold the heat in?
  16. F

    Sidearms & Scatterguns reshparpen knifes as good as new?

    Re: reshparpen knifes as good as new? I use a 1" x 30" belt grinder. I start with 320 grit them 600 finish worth a surgi sharp strop belt with rouge. I can get a abused, good steel knife shaving hair in 3 minutes. Its just not something you can throw in you pack to take with you. I do have a...
  17. F

    Gunsmithing Any recommendations for a gun vise?

    Re: Any recommendations for a gun vise? This is what I use. Seen them around for less than $40 Its not as bulky as the Tipton. http://www.mtmcase-gard.com/products/shooting/rifle-maintenance-center-rmc-1.php
  18. F

    EDM XM408 Sight In Results...

    Re: .408 Cheytac Sight In Results... That's the cool shit I want to see in the Beyond a 1000 yards. Thanks for sharing.
  19. F

    EDM XM408 Sight In Results...

    Re: .408 Cheytac Sight In Results... Why would you hurt my feelings? I never brought my feelings here. I totally agree. More to homeland security as I posted before. This has turned into something that has nothing to do with the service, homeland security, or mercenary. Its just I would like...
  20. F

    precision rifles... show em

    Re: precision rifles... show em dpreston Why are the bolts removed?
Top Bottom
Back
Home
Forums
Merch
Alerts