• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. trophyhunter

    Accuracy International Picture Thread

    That bottom roll pin looks like it’s a tad above. The way I check them, I run a straight edge length wise of bolt. If any snag, it’ll definitely cause issues. Also if you have any paint in the bolt stop, it’ll create a friction on bolt.
  2. trophyhunter

    Accuracy International Picture Thread

    Can you send pic of the front of bolt? Can you feel any of the roll pins on the bolt head? If one is protruding just a bit it’ll cause all kind of issues
  3. trophyhunter

    Accuracy International Picture Thread

    It’ll go way easier with some lube
  4. trophyhunter

    Accuracy International Picture Thread

  5. trophyhunter

    Accuracy International Picture Thread

    They ain’t makin’em
  6. trophyhunter

    Accuracy International Picture Thread

    Yes AT will be a thing of the paat Same as the 223 & PRC bolts
  7. trophyhunter

    Accuracy International Picture Thread

    Keep waiting…
  8. trophyhunter

    Stuck case in AI

    If memory serves correct, once the barrel starts to unscrew the head should come with it, and stuck case.
  9. trophyhunter

    Stuck case in AI

    Can do both, with or without The pins are what hold the head in, and tight fit. Once the pins are weak, they can shear or walk out, letting the head come off. I’ve had bolts that by simply removing the pins, the epoxy is worn enough that the head comes right off. I’ve had others that I need to...
  10. trophyhunter

    AXSR Extraction / Stiff Bolt Unlock Question

    I’m sure it’s a pain in the ass I skipped that part of AXSR. I’m still stuck in the AX
  11. trophyhunter

    AXSR Extraction / Stiff Bolt Unlock Question

    I’m gonna say something in your firing pin is binding. It could be the front of the pin is contacting the inside bolt head, either adjustment or a burr somewhere. I’m gonna assume your buddies FP assembly was same as yours, small for small or large pin and large pin? If you measure protrusion...
  12. trophyhunter

    AXSR Extraction / Stiff Bolt Unlock Question

    Was the rifle new? If not, any mods? got confused in the talk But with dry fire, you’re having an issue with heavy bolt lift? When you live fire it, does it have the same issue? Also try putting the safety on half, I’m guessing it opens and closed normally, almost with no effort. On the...
  13. trophyhunter

    AXSA or AXMC ??

    Bugholes.com
  14. trophyhunter

    AXSA or AXMC ??

    stick with AX SA, can shoot 223, can shoot all other .472 bolt faces and if you wanna step up to 338/300wsm…you win again I sold my AXMC, barrels were a pain, cause blanks weren’t commonly available. BR didn’t feed well. And well…I couldn’t shoot 223 🙂
  15. trophyhunter

    Accurate Mag nosedive issues in AT-X in .223

    Get some very fine sandpaper, sand the sides or follower to smooth it out. I’m gonna guess the ammo isn’t too long and binding on the front of plastic housing? I run this mags in my 223 conversion without issue.
  16. trophyhunter

    Accuracy International AT-X

    It is It has that extra slack after trigger pull similar to stock AI trigger. I have one in my Vudoo tuned very close to my AX
  17. trophyhunter

    Accuracy International: SA bolt with mag face

    338-300wsm, ThunderBeast Ultra SR on AX….short action 😎
  18. trophyhunter

    Who's built a 7-.300 PRC?

    Since you have a 300wsm, stepping up into a 338-300wsm is easy. I’m having a barrel spun for my AX short action. Chunking 250’s at 2700 seems fun 🙂 I know Red Beards Gun Works had built a few 7-300prc, @morganlamprecht might be able to tell you about his.
  19. trophyhunter

    AI AT to 6mm

    I’ve been running HRD mags in mine when my stock springs failed(to many rounds). I’ve gone through about 4 barrels with HRD mags without a hiccup or mod. I run a version of 6BRA. I ran 6BR for a barrel, no issues with that either. 6creed is the easy button, but start buyin barrels, it’s a...
  20. trophyhunter

    6.5 CM throat erosion and rebarrel

    If the barrel shoots, keep winning matches. But a 6.5 creed with 2500 or 3500rds is worn out. Mr Green a well known person that makes barrels has tested this in the factory a few times. They have a new material that from what I understand will up the barrel life. But as I said before, don’t...
Top Bottom
Back
Home
Forums
Merch
Alerts