• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. M113A3

    Neck tension .001 to .003 questions

    Might have to buy a new bushing,,, I am going to recheck my measurements since I was using a cheap caliper but decided to spring for a Mitutoyo before I do. Thanks guys.
  2. M113A3

    Neck tension .001 to .003 questions

    I recently bought some Redding dies to start reloading for a new rifle. I decided on buying a bushing according to the Redding website which suggested .001 smaller from a loaded round. I have not starting yet but recently read that .001 neck tension might not be enough if the bolt is run hard...
  3. M113A3

    .308 Winchester

    I don't but I am just getting set up to do load development for my new 16.5 SPS Tactical. I plan to ladder test to find what works best for my barrel and the 175 SMKs I have but also want to try the Berger 185 juggernaut and maybe the 160 Flatline as well but they are $$$. You might find this...
  4. M113A3

    Sniper’s Hide Cup 2018 Sniper's Hide Team Challenge Colville WA

    Maybe someone can clue me in. I thought I heard on the podcast the course of fire is practical tactical...? Being brand new to bolt guns and just scratching the surface on longer range shooting can someone clue me in on this? The reason I ask is that I have been watching a NRL 2017 match video...
  5. M113A3

    Brass Annealing Guide

    Thanks for the reply! Let me know how your testing goes. As for me just set up my body to bump the should of a test piece of brass... next step neck sizing :) Cheers!
  6. M113A3

    Show # 36, Explain this rifle

    Chris - just found this post... thanks for the details. I was glads to hear I am not alone in S.F. ;) I am just starting out on a similar path i.e. .308 and want to reload for it as well. I heard you mention Tomales is your go to range. I have not made it north yet as I typically go south to...
  7. M113A3

    Brass Annealing Guide

    At what point in your reloading journey did you decided to starting annealing and how much more life can you get out of your brass? I am just starting out with reloading rifle ammo for my new .308 and have saved my Federal brass I have shot so far (100 cases). BTW just from the outside...
  8. M113A3

    EP # 35

    Playing catch up - listened to Ep #35 this weekend and really enjoyed the class feedback. I was shocked to hear one of the guys (Chris D?) was from my neck of the woods... If you happen to be that guy PM me I have some questions for you on the Tomales range and the flat line bullets. Frank and...
  9. M113A3

    Sling recommendations for a precision rifle

    OP - which did you go with and how are you liking it? That is if you bought one at this point.
  10. M113A3

    Pain in the neck!

    Thanks - good advice. I am still adjusting to my new rear bag the str8 lace from TAB - it works well on the bench but for some reason prone it just does not seem adjustable i.e. squishy enough. Maybe more break in... not sure yet. I do have one of the small Red Tac bags that I really like the...
  11. M113A3

    Pain in the neck!

    nobody told me I had to wear pants on the range ;)
  12. M113A3

    Range Report New MagnetoSpeed v3 SD question

    Thanks man... As I get set up to start loading some rounds i am sure I will be back with lots of questions.
  13. M113A3

    Range Report New MagnetoSpeed v3 SD question

    Thanks for the link I will check that out. I wanted to mention that the four strips I listed were actually sequential. The reason for the separate strings was that I saved the data after each 5 round mag. Additionally the barrel was clean and the first shot of the string #1 was the cold bore...
  14. M113A3

    Range Report New MagnetoSpeed v3 SD question

    Thanks guys - real new to this and was just testing the v3. When I start load development what would be consider a large enough sample size to obtain useful date for a given load development?
  15. M113A3

    Range Report New MagnetoSpeed v3 SD question

    Hi all, Just getting started with bolt guns and decided to pick up a v3 and test the factory rounds I zeroed the rifle with. I plan on reloading for this rifle and wanted to have a target starting point for load development. My question is it typical to see the SD drop as the barrel warms up...
  16. M113A3

    Pain in the neck!

    Hi all - raising the bipod and extending the LOP seems to have done the trick! Thanks for all the replies!
  17. M113A3

    Pain in the neck!

    No glasses... yet
  18. M113A3

    The Everyday Sniper Episode 27

    Great now to spend some more money... your commission is in the mail ;)
  19. M113A3

    The Everyday Sniper Episode 27

    I think it was this EP that the weatherflow was mentioned as working with the Hornady 4ODF is that correct? I was thinking of buying a weatherflow until I can afford to upgrade.
  20. M113A3

    Pain in the neck!

    Hi All, First a big THANKS to everyone who has posted you guys are great. Last night I got home late but had enough time to at least get some adjusts made. Following everyone's advice I have made some improvements raising the bipod 2 clicks along with finding a cheek position (eyes closed)...
Top Bottom
Back
Home
Forums
Merch
Alerts