• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. M

    The new 33XC & 37XC cartridges designed by David Tubb

    For hunting look at the Chinchaga bullets, I’ve used the 375 grain ULD ST for several years and it is devastating on game! Not to mention has a G1 BC of .8 and consistently groups really well in my rifle.
  2. M

    Shooting 50bmg/other braked rifles, TBI and tinnitus

    We are currently testing shoulder fired weapons, and the 107 is one. Refer to my post #5.
  3. M

    390 grain Hornady A-Tip load development 375 Cheytac

    I haven’t, just shot it out past 2500 and it did great.
  4. M

    390 grain Hornady A-Tip load development 375 Cheytac

    I am running the BC @ .460 G7, at least it’s good to know that I wasn’t really off. I was doubting my findings, but haven’t really pushed it to the trans range either.
  5. M

    390 grain Hornady A-Tip load development 375 Cheytac

    Peterson in that barrel. My original load (for hunting, 375 grain Chinchaga @ 3150) I use Bertram, it’s used in my 30” (10” twist) Bartlein. Fired the ATip load a few days back. Last 3 shot group made a nice triangular 7” group @ almost 1300 yards and an SD of 9 for the last 10 rounds fired...
  6. M

    390 grain Hornady A-Tip load development 375 Cheytac

    Unfortunately no deer showed up the one afternoon I got to sit out there. It was only a 3 day season, so someone else will have to be the guinea pig.
  7. M

    390 grain Hornady A-Tip load development 375 Cheytac

    Played with H50BMG a bit yesterday, 143gr in the Snipetac got 3030 fps and close to .25” @ 100 yards for 3. When playing with powder charge the 4 shots I sent (starting 140 & 143 final) made a very nice little cluster. I loaded a few more up with 143 grains and made a first round impact at 1240...
  8. M

    Peterson 375CT Brass early vs later lots 17 grain discrepancy, AMP 0151 vs 0165, neck thickness/tension

    I haven’t bought any more Cheytac Peterson brass in a while but will measure them compared to my current stock when I do. I did get 100 more pieces of Peterson 33XC brass in and its rim is larger by enough that it won’t fit in my #14 RCBS shell holder, like the last batch and my .338 Lapua brass...
  9. M

    Gunsmithing Stock / chassis for savage 112 target

    The 2 outer holes line up with a standard long action. I also have a regular plastic Savage factory stock and it will fit right in, just don’t get to use the middle screw (same with as the chassis).
  10. M

    390 grain Hornady A-Tip load development 375 Cheytac

    And this is a standard Cheytac (if there is such a thing😁)? I have been playing with these in a Snipetac with a 36” barrel. Haven’t ran it hard, a middle of the pack load of 139gr of RL50 in Peterson brass gets 2960 fps average. The 100 yard groups (3shot) were really good in the K&P barrel...
  11. M

    Shooting 50bmg/other braked rifles, TBI and tinnitus

    That’s not far from some of their ideas.
  12. M

    Shooting 50bmg/other braked rifles, TBI and tinnitus

    When we have the guys on line shooting the 107s I am about 10 meters back (you can spot for that dude that far back) and still have a slight headache when we leave. According to the gov contractor I am getting damage, which I don’t need more of. Part of the problem is shooting prone, so far we...
  13. M

    Shooting 50bmg/other braked rifles, TBI and tinnitus

    We have had a gov contractor come out to the range over the past year whenever we take the M107s out. He places sensors on guys to measure for blast effect that can cause TBI, and firing that dude gets over the threshold.
  14. M

    Gunsmithing Stock / chassis for savage 112 target

    I have a 33XC barrel for mine as well as .338 Lapua. Wanted the single shot action for rigidity, so I got one. Would have to single feed anyway. Wanted to try a chassis and still keep the wood stock for a lighter rifle to carry in the mountains, so I got one.
  15. M

    Gunsmithing Stock / chassis for savage 112 target

    Yes, been doing so with the 112 .338 Lapua target action in an XLR Element chassis.
  16. M

    Maggie’s Funny & awesome pics, vids and memes thread (work safe, no nudity)

    Light a man on fire and you keep him warm for the rest of his life.
  17. M

    Shorter range data not lining up with mile data

    You sure you’re not having a scope or mount issue? Do you start your shooting session with checking zero?
  18. M

    Reloading Equipment ARKANSAS trading] FTF trade of fed 210m primers

    Last week it was $48 or something like that.
  19. M

    Reloading Equipment ARKANSAS trading] FTF trade of fed 210m primers

    Edit: all gone
  20. M

    1.350 tenon barrels

    Ken probably doesn’t stock them as his as such are made to order, he made my .375 cal 1.350” tenon x 36” fast twist barrel. The good news is that his delivery time was measured in weeks instead of months and he will make what you want (within reason). He is an older fella that doesn’t sit around...
Top Bottom
Back
Home
Forums
Merch
Alerts