• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. T

    Video - AX338 to 2000m for the Larry Vickers Tactical Channel

    Can't imagine factory ammo being too great at that long of distance! So that's some good shooting
  2. T

    Video - AX338 to 2000m for the Larry Vickers Tactical Channel

    I noticed you were pouring water on the blazing hot suppressor. Is this OK to do with a titanium suppressor? Here in the blazing heat, even with a mirage cover, the suppressor mirage starts to really kill visibility. Looked like a good time. I wouldn't quite say it's like a lottery, but there...
  3. T

    Suppressors 30 cal suppressor recommendations

    Hmmm u was finding the mounts to be over 200,maybe I was looking at the wrong thing
  4. T

    Suppressors 30 cal suppressor recommendations

    Hmm looks pretty good. The mounts look extremely expensive though, are they really worth it?
  5. T

    300blk upper

    So why would someone want to go with 11.5" when everything gets burned in in 9"? What am I missing.
  6. T

    Suppressors 30 cal suppressor recommendations

    I'm in the market again for a suppressor. I have a 338BA from thunderbeast and love it. I use it on my 338's and all my bolt action/precision 308's. It's BIG but its super light, so Its great for those I will continue using it even on my 308's. However, I do want something I can use on my...
  7. T

    300blk upper

    Can you guys give me some recommendations for built 300blk upper. I'm not against building one, but I feel like prebuilt ones probably hold their value better. I have heard that 10.5" is where its at, but at the same time I have read that all the powder burns by 9", so why would anyone want one...
  8. T

    Best overall complete lower?

    Thanks for all the help guys. I decided to go the way of buying a stripped lower like many recommended and building from there. I actually ended up getting two from my local selection (I didn't want to deal with FFL transfer and fees for just a lower). I got a 'cheapie' spikes lower for one...
  9. T

    Suppressors Switch caliber suppressors. Do they exist?

    I use my 338 thunderbeast can on my 338 and all my 30 Cal rifles. It's rather large for a 30 Cal, but the titanium make it so light that it's definitely as light if not lighter than many smaller 30 Cals out there. Plus, I've never heard a 30cal can that suppresses the sound better than my 338...
  10. T

    Right side bolt release

    I wouldn't want to break up my "pre-built" rifle. Gonna have to think of some creative solution
  11. T

    Right side bolt release

    Hmm I did see that but my concern was how fugly it is and the space requirement in the trigger guard. I might have to try that if there isn't another option though.
  12. T

    Right side bolt release

    Is there something I can add to my JP that would let me release the bolt with my right hand. It's really annoying that it's on the left side. It means I either have to drop the round before I'm ready and cook the round jn the chamber or I have to get in position then disrupt it to drop the...
  13. T

    LRP-07 inconsistent accuracy

    Alright, so I don't have a final update yet but I wanted to keep those that are following this thread up to date. As I said earlier, 175smk loads did not work out well. Here is my OCW from it: As you can see there really is no apparent OCW node with consistent POI's across charges. The...
  14. T

    308 semi auto load ranges

    Well this is what I was planning on doing: Varget powder: SBS brass 175smk 5x 43.5 5x 43.5 5x 44.0 (double checking nodes I found during initial OCW) SBS brass 168smk OCW 42-44.8 in .4gr increments SBS brass 155gr sierra palma OCW 44-46.4gr in .4gr increments FC Brass 175smk OCW 42.6-44.2gr...
  15. T

    308 semi auto load ranges

    From my understanding, Lapua brass is smaller than Winchester by a grain or two and its got about the same capacity as military brass. I'm currently using SBS brass. I'm not sorting anything either. I will try to load a bunch up and see what works tomorrow (if it doesnt rain) I didn't want...
  16. T

    308 semi auto load ranges

    Thanks for the replies guys, it does help. The reason I don't use the Amax Is simply because I couldn't find a box locally, I wanted to try both 168 and 178. And I do use OCW as my method.
  17. T

    Best overall complete lower?

    Holy Crap, I gotta get on it asap then!! Anyone know who does engraving in Phoenix, AZ.
  18. T

    308 semi auto load ranges

    Ttt
  19. T

    Best overall complete lower?

    I have a trust for my suppressors. If I buy a lower already sbr, do I still need to do the engraving. I would rather not have to put my trust name onto a firearm lol
  20. T

    Best overall complete lower?

    Ok so I took the advice of many any bought a cheapie as a host for some future uppers. Now comes the form 1 itch. What's the best way about doing this. Since it's a 1 time thing, I'm think I'm gonna go quality and go for something like an LMT. Should I just get it off line and then apply with...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts