• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. D

    Accuracy expectations with 22

    The klinsky goes for about $330 plus shipping. Total cost my guess is $400, maybe a little less.
  2. D

    Accuracy expectations with 22

    Use to be able to get them from a guy named Denny but he isn’t doing it anymore as far as I know. The one above was bought directly from the Czech Republic and shipped to the USA. It is a pain to do as they don’t speak very good English so it’s hard to understand them and you gotta wire the...
  3. D

    Accuracy expectations with 22

    452 was shot off a bipod and the klinsky was off a rest. The 452 had an 18” threaded custom made to my spec Lilja 3 groove barrel with a chamber I designed and the 455 used the same blank but wasn’t threaded and was 24” long. Both where bedded, triggers, full bolt work etc. Both rifles pictured...
  4. D

    Accuracy expectations with 22

    All my current rifles will do .2’s or better at 50 yards and around 1/2” or better at 100 yards (all ammo I run is lot tested ). All my guns are custom fit match Barrels and fully reworked. Equipment is important but the most important parts of the gun are the barrel and the ignition. Make any...
  5. D

    CZ455 bolt threading

    A new knob can be done with ease on handles with the hole in the end. When the glades handles first came out I was super happy as they are cost effective and would save a bunch of time. One issue is the change in headspace but when your custom fitting a barrel (which I did on all of them)...
  6. D

    Sako quad Al bedding

    Pillar and glass bedding it will be a better fit than a pre machined block. The epoxy will be perfect fit all around the action. These ain’t for the occasional person who beds stock but anyone who is good at bedding a stock could do it with ease.
  7. D

    CZ 455 Precision Trainer w/ Fedderson barrel

    From a safety stand point, the Barrels are drop in and will be perfectly fine. On the accuracy side not so much. I designed the shim Barrels for Lilja and they are the only way to do a drop in with out custom fitting and getting solid accuracy. To measure it requires the use of a quality depth...
  8. D

    Issue with CZ455 oversized bolt handle sitting too low

    Never did this for the money and not to sound like a prick I know I’m damn good at it! At the age of just 36 I’ve realized it’s time I need to put all that extra time I was putting into building guns into my family! I make plenty of money from my 9-5 so I ain’t losing anything here except of...
  9. D

    Issue with CZ455 oversized bolt handle sitting too low

    I have officially retired doing gun work two weeks ago :(. There is a guy on Facebook or something like that called the polished knob that can do it.
  10. D

    New Vudoo Thread with Eley Test Results and Pictures to follow.

    I can guarantee it no problem as with the variables in bedding, the barrel, and ignition, can all be fixed to work together. With a factory barrel no guarantee is possible as your at the mercy of one of the most important parts of the build and it doesn’t matter how good you are as the results...
  11. D

    New Vudoo Thread with Eley Test Results and Pictures to follow.

    All I do is rimfire and have seen tons of rifles that have been shot at both eley and lapua. Lot testing in this manner isn’t 100% perfect. I’ve seen guns do poorly at the facility and shoot wonderful in the stock and the other way around. Why? It’s called harmonics. Rimfires are way more...
  12. D

    New Vudoo Thread with Eley Test Results and Pictures to follow.

    Data is great no doubt about it but a barreled action clamped with a tuner really doesn’t translate into the real world especially when it’s sitting in an actual stock and being shot. Shooting in matches will be the real test imo along with time. If these can shoot on par with the best of them...
  13. D

    22 WMR?

    Sometimes it’s the rifle that makes the ammo look inconsistent. Could be the rifle has an ignition issue which is common on a 455. Do you get vertical at 50 yards at all? How does it print at 50?
  14. D

    Tikka T1X

    Judging from my research, Barrel swapping will most likely be the case. I just hope it’s not like the quad and has metal all around. I’m getting one of these to play with soon as they are available. If the actions have metal all around the tenon I’ll do a barrel and a stock. Might be similar...
  15. D

    New Anschutz 1710 with Carbon Stock

    I wish I could but I have way too much work :(. Cerakote should be showing off a 455 I built if they have gotten the chance to coat it. Brian, do you guys have a good amount of the 1710 GRS hybrids? Also when are you guys getting more lots of R50 in?
  16. D

    New Anschutz 1710 with Carbon Stock

    The match 54 triggers are not drop in on the repeaters. The actions are similar with the biggest differences coming in the rear tang area. The bolts in these rifles are also different. The simple answer here is for those that must have the 5018 on their Repeater it can be done. The major issue...
  17. D

    CZ 455 Build or run a 455 Precision Trainer

    Here she is :). 58* with winds at 19-20 mph and I could still shoot in the .2’s off a rest that a chassis like that should suck lol. I gotta try out the benchrest adaptor plate xlr has available.
  18. D

    New Anschutz 1710 with Carbon Stock

    The way it’s designed there is no slip at all. I’m 6ft tall and I’m hand fits the grip like a glove. Here are some pics of the stock.
  19. D

    New Anschutz 1710 with Carbon Stock

    I’m liking the look of that. I’ll get one and do a Lilja barrel, bedding, and all the other stuff to see how it compares to the 1710 GRS. The GRS version imo is just a flawless setup. Fully adjustable stock and super comfy! This is one I just finished.
  20. D

    Annie 64 BR

    Cheapest way to go is get a Boyd’s pro varmint for a 64 but it requires a little inletting work. These where patterned after the older shorter and smaller 64 actions. Takes about 30 min of work and it’s good to go. Pillar and glass bed and your done. You could get a flat top T4 in the rimfire...
Top Bottom
Back
Home
Forums
Merch
Alerts