• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. T

    Applied Ballistic custom curves

    I don't know if the geoballistics app is compatible with the Applied Ballistics app but you can input weather data manually.
  2. T

    Swap Savage Elite Precision 6.5 CM to PRC

    The Savage elite precision with a large shank is for 338 Lapua which is a long action. I don’t believe they make an elite precision in short action with a large shank.
  3. T

    Preference for basic die sets - RCBS, Forster, Hornady or other?

    I’m not a Dillon guy. I have a Hornady LnL AP Progressive press. For the progressive press I use Hornady dies because they have more threading and just work well in my press. For my single stage Forster Co-Ax I have an assortment of dies. Redding Custom Competition dies for my precision rifles...
  4. T

    6.5 CM Bullet Comparator

    Not if you buy the complete set. https://www.midwayusa.com/product/1012738158?pid=348740
  5. T

    Lapua brass in a bag?

    I've never been shorted piece of brass by Lapua. You actually get 101 pieces in every plastic box. 6BR, 6.5CM, 308Win. I haven't bought any in the new cardboard box.
  6. T

    Swap Savage Elite Precision 6.5 CM to PRC

    I believe that Savage only makes the 6.5PRC in large shank. Measure the length of the barrel nut on both rifles. Small shank barrels have a 7/8" long barrel nut while large shank barrels have a 5/8" long barrel nut. There are aftermarket barrels for 6.5PRC made with small shanks. Pacific Tool...
  7. T

    Savage 110 Elite Precision in 6.5 Creedmoor

    On their website the photo shows the fluted bolt and a 3 year old video shows the TiN bolt. I personally think that the TiN bolt looks hideous. All I woud do is replace the bolt handle with the longer tactical factory handle that MidwayUSA sells for $33.00
  8. T

    6.5 CM at One Mile

    I know what the velocity is with that amount of drop for 6,200' DA. I just wasn't sure if you may have had a really high DA helping you because that's really moving for a 140gr projectile
  9. T

    6.5 CM at One Mile

    Any Idea what the density altitude and muzzle velocity were? My 139gr scenar's at 2761fps MV need 78.1 moa at 6,200ft DA to get to 1760y. My 147gr ELD-M's at 2695fps MV need 69.3 moa at 6,200ft DA to get to1760y. Edit: Just noticed that it's a 4 year old thread.
  10. T

    Precision Rifle Gear 3d printing bore guide question

    I’ve used the bore guide for my CZ-457 for at least 2 years now with no issues. The bore guide costs less than $2.00 to print so worst case I throw it out and make another one.
  11. T

    Precision Rifle Gear 3d printing bore guide question

    I’ve done some out of PETG. No issues.
  12. T

    Savage bolt guns

    Not a chance. I'm still on the hunt for more.
  13. T

    Fierce Rifles Quality and Accuracy

    I am in Canada. There are 2 guys at my club that have hunting rifles made by Fierce and I've seen them shoot them. Both of those shot very well at 300M. I'm talking 1/3 MOA or so 3 shot groups.
  14. T

    Gunsmithing Savage bolt hard to close on round

    The question still remains. Did you remove the ejector prior to headspacing?
  15. T

    Gunsmithing Savage bolt hard to close on round

    What do you mean by Go Gauge cycles perfectly? You did remove the ejector when setting headspace?
  16. T

    .264 bullets for PRS other than 140 eldm?

    My down range performance was better but it was always a question of availability. Here in Canada they are cheaper than the ELD-M.
  17. T

    Lake City 7.62x51 virgin brass?

    My only experience with LC 7.62 brass is the 1,000 pieces of LC 06 I bought in 2012. I specifically bought it because the spent primers were still crimped in and I had to sewage the primer pockets. At the time I paid $0.12 a piece or $120/1,000. I bought it to use in my M1A national match. Works...
  18. T

    Help new reloader read preasure signs 7prc

    Did you do any type of primer pocket work such as uniforming? That ring looks like a tool mark. As far as pressure signs the things I look for, and this is in no way a scientific approach, Heavy bolt lift. If I feel it I mark the case with an X on the base with a sharpie. This way I will pay...
  19. T

    CZ 457 Question

    One thing to note is that CZ-USA doesn't import every model. In Canada the CZ 457 Varmint AT-ONE comes in 3 lengths 16", 20", and 24" It comes with the MATCH chamber and the barrel threading is 1/2"-20 instead of the typical 1/2"-28. The CZ Varmint MTR in Canada is also available in 16", 20" and...
  20. T

    Tac Ops Rifles

    That's not the Tangent throw lever on there is it? Which one is that? Can you post a closer pic please?
Top Bottom
Back
Home
Forums
Merch
Alerts