• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

  1. SharpShooterSER

    6.5x47 Lapua

    match targets from last Sunday, 2x10 shots. mild wind, but heavy mirage. 140 eldm, 39.5gr N550, cci 450, 2830 fps, 28" mmr Sabatti barrel. those 2 9s are my fault - impatient, not waiting for a clear view for a shot. second target (smaller group) is better.
  2. SharpShooterSER

    Optimum barrel time: great theory or bunk?

    In past few years I've done more than 20 different calibers and loads using OBT as a starting point and it got me to the desired result much faster than I used to achieve it before using it.
  3. SharpShooterSER

    Annealing

    My $0.02. In terms of speed, flame vs. other methods are not that different (most of the cases done with flame are below 8 seconds). Induction may do it in 3 or 4, but take out the case, put in another one......so unless you do 10k of them at the time, in terms of time saving I dont see much of...
  4. SharpShooterSER

    ES too high

    Thanks :) 6.5x47 Lapua
  5. SharpShooterSER

    ES too high

    my process that gives me single digit sd/es. lapua brass deprime flame anneal neck size shoulder bump .002 Forster 21st cent. mandrel wet tumble with ss pins in Frankford tumbler, Arf(LemonShine) and Fairy, about an hour blow out with air, leave for few days to dry prime to touch the bottom on...
  6. SharpShooterSER

    AGS annealer coupon code?

    yes, it was active until end of August (please take note of time difference). I will activate it now for September!
  7. SharpShooterSER

    AGS annealer coupon code?

    For an old customer like you, of course we can work something out! :cool:(y)
  8. SharpShooterSER

    AGS annealer coupon code?

    For Forum members, of course! Just activated, until end of the August! forum10
  9. SharpShooterSER

    AGS annealer coupon code?

    Code is still active forum10
  10. SharpShooterSER

    Before I ruin this nice brass how are the cool kids resizing?

    never had doughnut problem with my neck sizing/shoulder bumping + mandrel (and some of the brass is on its 17th firing). even when I was using cheap prc scale and hand throwing my sd and mv were right where they should be. and I stumbled on obt and used it many times now with ql to get to the...
  11. SharpShooterSER

    Before I ruin this nice brass how are the cool kids resizing?

    Interesting. I tried 95gn ELDX for my XPR hunting rig, those are supposedly too heavy for 1-10, and could never get a great group. Its usable for hunting, but nothing past 200 meters, and per calculator at any speed they are marginally stable. On the other hand, I dont have the fancy dies (plain...
  12. SharpShooterSER

    AGS annealer coupon code?

    Code "forum10" for 10% discount for forum members until the end of July!
  13. SharpShooterSER

    6.5x47 Lapua

    500 meters (547 yards) Nationals mid June, 20 shots. Prep and match are 25 mins (7 test shots on different target and 20 for match). Previous day was raining a lot, and on match day it was cloudy. Just before my squad was to start the match, sky cleared and sun started to shine. You cant imagine...
  14. SharpShooterSER

    First time annealing, have questions.

    at least use tempilaq for proper and repeatable results (older method can give you a close ballpark, but tempilaq is much better way to be certain) and if possible a regulated tank. or you can go and spend over 1.5k for the best there is (hands down). be sure that the case is spinning all the...
  15. SharpShooterSER

    AGS annealer coupon code?

    🤦‍♂️my bad (reminder, do not answer to threads early in the morning, my head was still in May).
  16. SharpShooterSER

    AGS annealer coupon code?

    AGS01 5% discount for forum users until the end of May!
  17. SharpShooterSER

    6.5x47 Lapua

    typo, N550
  18. SharpShooterSER

    6.5x47 Lapua

    I am at the higher node with 140 eldm, with 39.5gn of N550, at 2780 fps out of 28" barrel (but its Sabati MMR, different rifling) 2.811 oal and easily in .3. Virgin or several times fired and flame annealed Lapua brass, with 0.02 neck tension, 6-8 fps SD.