• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. FLIGHT762

    Who makes this 308 brass?

    Actually, I believe it is Swedish (Norma) Brass. I collected some last month from a shooter at the range that doesn't reload. It is very uniform brass. Somewhere on the net, I found some info on it. Can't remember where now. I was also confused over the "22" head stamp, thinking it was some...
  2. FLIGHT762

    '06 brass to 35 whelen

    Some die manufacturers offer a tapered neck expander to neck up. I use one in the 338/06 to expand 30/06 cases to 338". I use another one in my 358 Winchester dies to go from 308 win. cases to 358 cases. They both work well, but you need to use a good lube inside of the case necks. Both of my...
  3. FLIGHT762

    Anyone ever use Bulkloadingsupplies.com? They only accept Venmo, Apple pay, and Cash app??? Also your order must be $100 or more! They do have an FFL

  4. FLIGHT762

    Anyone use Win 760 powder before?

    I've used a lot of 760 in the 30/06 and the 270 Win. It made very accurate hunting ammo. A very good powder that is over looked today. As others have said, H-414 is the exact same powder. Downside it is temperature sensitive as with most other ball powders, but it can be used as a replacement...
  5. FLIGHT762

    Barrett MRAD 308

    https://www.snipershide.com/shooting/threads/308-winchester.135/
  6. FLIGHT762

    7.62 brass with "1K" headstamp

    Imgman has an "lK" head stamp.
  7. FLIGHT762

    Neck only sizing Question

    Just remember you will have to F/L resize those N/O cases at some point. I fucked around with N/O sizing for a while. I learned I could 3 or so firings before F/l sizing. During my testing, I had to beat open the bolt with a 2X4 a couple of times for cases that were fired over 3-4 times. I...
  8. FLIGHT762

    How much case web thinning is too much?

    O/P, how are you measuring the shoulder bump on your fired cases? How much are you setting F/L sizing shoulder bump on your fired cases? I haven't had a case head separation since controlling my F/L sizing shoulder bump and properly measuring fired case datum length and using a minimal bump on...
  9. FLIGHT762

    Sizing the web

    Before going out and spending more money on a small base die, Try some more shoulder bump. Some Ar-10's are over gassed and you might be getting more shoulder stretching as the bolt is unlocking, giving you a longer shoulder than the chamber is. M-14's are more notorious for this. I have a...
  10. FLIGHT762

    308 load data for 16 inch bolt gun. (178 ELDX)

    Alliant 2000MR will do the same thing as the CFE223. Gives much higher velocities in the 308. 46.5 grs. gives me 2750+FPS with a 175 Nosler CC in a 24" barrel.
  11. FLIGHT762

    Restoration of Cartridge Brass

    O/P started this same thread over on The High Road last Monday. https://www.thehighroad.org/index.php?threads/cartridge-case-ductility-verses-annealing.918429/ On a quest to get the truth out. I don't GAF one way or the other. So what's the term we all should be using for this cartridge case...
  12. FLIGHT762

    30-06 Berger and Powder Preference

    In a 30/06 bolt gun, I preferred 4350 for the 168+ bullets. You get a bit more velocity, but Varget will work, your preference. for Deer hunting, I don't see the fascination of using a thin jacket Match bullet on Game. I know a lot of guys use them, but for Game use, I like a bullet that will...
  13. FLIGHT762

    Yep another FNG trying to reload for the AR 15 questions.

    O/P, your S&W Rifles are not match Rifles. Set you F/L die up to bump the fired case shoulders to about 1.455" (from you listed measurements). Make a couple of dummy rounds (no primer or powder) to be 100% sure they chamber easily in both Rifles. Bumping your cases to -.005" is not going to...
  14. FLIGHT762

    Forster Ultra micrometer seater die

    Here's another way to skin the Cat. I do this with my hunting Rifle loads for 30/06, 270, 300 Mag, 260 & 223. You can buy a Hornady seating die for $30.00 (unless you're using a Hornady die set) and then a Hornady Micrometer seating stem for $40.00. $70.00 total cost. The Hornady seating stem...
  15. FLIGHT762

    Replacing bullet and powder from good round to new grain

    Plan A : M-25 & M-62 tracers are about 145 grains. You might get away with replacing them with a 150 gr. bullet, but NOT a 168 or 175 bullet. If you dissemble them, you're going to have to at least re- neck size the cases to properly seat a new bullet. Plan B: If you want to get rid of them...
  16. FLIGHT762

    Shoulder Bump Problem!

    The die that you need space between the shell holder and die is the seating die, if you don't want a crimp. If you set the seating die too low, you can buckle the case shoulder, which will cause chambering issues.
  17. FLIGHT762

    Precision reloading for an M1 Garand…anyone experimented enough to find a 1 MOA load? Is it even possible with a Garand?

    The 173 Gr. bullet was the old M-72 FMJ Match bullet.
  18. FLIGHT762

    308 / 7.62x51 reloading

    The same reason you don't find 5.56 NATO dies. No difference in 223 Rem. / 5.56 NATO or 7.62 NATO & 308 Win. dies. The outside diameters of the brass are the same.
  19. FLIGHT762

    Biggest unicorn

    Nobody wrote Federal 215M's. So, there it is.
  20. FLIGHT762

    308 Winchester AR Only

    My point of not buying RE-15 again is related with it's poor temperature sensitivity. I had good luck with it. I have a couple of #'s left and I'll use it up. RE-15 is just as expensive to buy as other powders like Varget, H-4895, 8208 XBR, & AR Comp which are much less temperature sensitive...
Top Bottom
Back
Home
Forums
Merch
Alerts