• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

  1. Taylorbok

    Spotters Sig Kilo10K Gen 2, AB Quantum app, Sig BDX app first impressions and comments

    AB Quantum now having the ability to link to Binos and Kestrel will be really nice. I use BDX External for matches and the on board AB for hunting. works for me
  2. Taylorbok

    Where to buy autotrickler/fx120i combo

    CE Products for the combo. Looks like he's got some in stock right now. That's where I bought my scale from
  3. Taylorbok

    The Chad muzzle brake or something else

    I've done it both ways but normally I snug them up with a wrench. I've never had them come loose.
  4. Taylorbok

    The Chad muzzle brake or something else

    If that's a Heathen Gen2 they have absolutely zero blast to the shooter since the ports are 90 degrees. I have one and it works decent but the MBM reduces recoil more and the blast still goes around the shooter.
  5. Taylorbok

    The Chad muzzle brake or something else

    My favorite brakes so far are from Muzzle Brakes and More. They have really good recoil reduction, I don't notice shooter concussion. I use on 30 SM and 338 Edge. My go to is the Super Beast II
  6. Taylorbok

    25 Creedmoor Large or Small primers?

    I shoot SRP in my 22 CM but I really don't think it matters, once this brass is toast I'm gonna go to LRP so I don't have to switch the priming setup on my Dillon
  7. Taylorbok

    .22 Ammo storage for matches

    I had some of these printed https://www.atlastargetworks.com/collections/3d-printed-parts/products/3d-printed-sk-lapua-rimfire-ammo-case-1?variant=44993435468091
  8. Taylorbok

    Firearms Bat Machine Igniter LA

    What angle rail? is the action cut for mag feed?
  9. Taylorbok

    300 PRC

    Hornady had some of this info on their podcast recently. 300 PRC barrel life expectancy. Low: 1014, Avg: 1268, High: 1521 which there is more factors that play into it what they took account for but you could reason pretty well that a middle of the road load vs a hot load would get you about...
  10. Taylorbok

    300 PRC

    you can probably stand on the 230's a bit harder than that. I'd guess max around 80 ish
  11. Taylorbok

    Describe your perfect scope

    I don't know anything about scope mfg but one thing in my mind that could either drop the cost or allow more elevation would be less zoom multiplier. Most shooters never go below 10 or over 20, what if there was something like an 8-24?
  12. Taylorbok

    300 PRC

    76-77 should be a pretty top end charge.
  13. Taylorbok

    Sighting in advise

    never heard of it but I don't tinker with 10/22 much just blast away. Looks like it could help, shouldn't hurt anything.
  14. Taylorbok

    Sighting in advise

    what is a gunsmither block? I mean I know what a gunsmith block or bench block is but I am unsure how it will help
  15. Taylorbok

    6 ARC headspace

    Difference between a type 1 and 2 bolt is .012" You've got about .013 of stretch so you might get away with that but IMO that chamber was cut wrong since a Go gauge is 1.130 the bolt probably won't close on that. so if the ammo was at actual spec you are gonna have a crush fit and that's not...
  16. Taylorbok

    Sighting in advise

    no, if he puts a canted rail it will bring his impacts up.
  17. Taylorbok

    Back In The Saddle

    They show a 215 option on their site? I run 245/250's in a 30SM which is basically just a PRC improved, works mint, I have heard that with the 230 a-tips it's basically even dope to the 250's what you lose in BC you make up in speed.
  18. Taylorbok

    Back In The Saddle

    that 245 EOL is a wicked ELR bullet.
  19. Taylorbok

    Best ballistic calculator currently?

    Do people actually use the reticle diagram? If you are gonna hold don’t you just check the drop and use reticle to measure?