• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. MDT_Josh

    MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis.

    Great idea and definitely something we're investigating! No details for you right now though :( - Josh
  2. MDT_Josh

    MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis.

    There have been reports of a few that have come out not fully tightened (that's on us and our QWC team, sorry!). All you need to do is remove the little rubber plug, use a 1/4" hex key (I found that a long, L-shaped one works best) and crank it gorilla tight! 🦧 Hope this helps (we have fixed...
  3. MDT_Josh

    MDT new gen 2 ACC

    We don't have a process for that unfortunately. You'll have to ask Antony/ @MDT_OFFICIAL /[email protected] directly! - Josh
  4. MDT_Josh

    MDT new gen 2 ACC

    We haven't officially released anything yet, but they should be on the site in the late summer/Early fall time-frame! Josh
  5. MDT_Josh

    MDT new gen 2 ACC

    The initial launch inlet should be the Remington 700 Short Action, with other inlets (including the Tikka T3x) to follow. We do not do ambidextrous inlets in our chassis, however, the ACC Elite should have LH inlets available shortly after launch. - Josh
  6. MDT_Josh

    Official MDT 6BR Magazine Thread

    Just wanted to hop in, clarify some things and see if I can help! The magazine that you bought appears to be one of our 10 round 6BR magazines, we also offer a 12 round. Unfortunately, our MDT 6mm BR magazines DO NOT RELIABLY FUNCTION WITH ALL 3-LUG ACTIONS: Curtis, Terminus, Ultimatum, etc. We...
  7. MDT_Josh

    Recommend a Left Handed chassis or stock - R700 compatible

    Good question! We're getting quite close on those and last I heard the molds were in for the LH side panels, I am just not sure when they are scheduled to run. I think we're only a few weeks away from the first runs though :D - Josh
  8. MDT_Josh

    MDT ACC Elite

    We'll offer all of the custom colours asap, but the launch colours will be a bit more limited for "in stock". The wait time for a R700 SA RH ACC Elite in ODG should be 6-8 weeks if all goes to plan. - Josh
  9. MDT_Josh

    MDT new gen 2 ACC

    Yes, our inlet is designed for just about every R700 clone to be a drop in fit and require ZERO gunsmithing or additional work! That is in the plans, but will most likely not be available in the initial launch. Ideally we can have it ready before the end of the year though. Josh
  10. MDT_Josh

    MDT ACC Elite

    I will see what I can do! - Josh
  11. MDT_Josh

    MDT ACC Elite

    Guys we're about to get these into the production queue and we can't wait to have them out in the wild and winning matches! The late summer/early fall is currently on track to happen and I promise I am doing all I can to fast track it :D Thanks for your patience. - Josh (the above mentioned...
  12. MDT_Josh

    HNT26 ring height

    I'm running our 1.18" One Piece Mount with a Gen2 Razor 4.5-27x56 and I have clearance! If you're going with a 50mm objective and 1.10" you'll be okay! - Josh
  13. MDT_Josh

    Recommend a Left Handed chassis or stock - R700 compatible

    We make a whole variety of LH chassis and you can check them out on our site! As a left, I have shot just about all of them and can help answer any questions you may have :) For your purpose, I would suggest our LSS-XL chassis, or soon to be in production LH XRS! MDT LH Chassis - Josh
  14. MDT_Josh

    MDT GRND-Pod

    We have shipped hundreds already and only a small handful have had issues (which we're already working to adjust), so that is a fairly smooth product launch in my opinion. I am sorry to hear that some of you have been running into issues, but we're trying to provide you the best bipod for the...
  15. MDT_Josh

    MDT new gen 2 ACC

    @spife7980 is correct and they are not yet on the website. We are running the initial production run VERY soon and they will come in a standard black rubber to start. I expect to see them on the site within a few weeks here :) We just did a video with Long Range With the Lillys and that should...
  16. MDT_Josh

    Bipod NRL22

    As a note, we are running FLAT OUT on the GRND-Pods right now to get things back in stock as the initial order was WAY higher than we planned for, so thanks for the overwhelming response guys! Thanks buddy and I do what I can! If I could jump in and help production go any quicker, I would but...
  17. MDT_Josh

    AI v. DT v. MPA v. MDT v. Cadex

    Hey I really appreciate this reply and it's honestly an interesting concept! The closest thing we have had to date is our ESS chassis where you buy the centre body for your inlet (R700, Tikka, Howa, etc.), then you have 3 different forend lengths, 3 different forend styles (+ a carbon fiber...
  18. MDT_Josh

    MDT introduces the HNT26! A 26 Ounce Carbon Fiber Hunting Chassis.

    Assuming that you're using our MDT Carbon Premier Grip and no muzzle device, I calculated that the folded length with a 20" barrel to be about 78.6 cm, so you'd be a little under the 84 cm minimum :( So you'd either need to: Get a slightly longer barrel, OR, Add a muzzle device of some sort...
  19. MDT_Josh

    AI v. DT v. MPA v. MDT v. Cadex

    It is something that is being adapted all over the place (not just on the JAE-700 G4). If you look at pretty much all of the newly announced chassis: ACC Elite, MPA Matrix Pro, KRG C4, they all incorporate something similar which is kinda cool to see now! We have no plans of supporting anything...
  20. MDT_Josh

    PSA: All Creedmoors should be .25 Creedmoors

    Oooooh this is a spicy 🔥 title for a thread, I love it! Anyhow, interesting idea, but why not have all the Creedmoor's and shoot all the things? Just my thoughts and choose the best round for the job ;) I think the 25 Creed/25x47 is super interesting, but the lack of bullet support right now is...
Top Bottom
Back
Home
Forums
Merch
Alerts