• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. A

    Magnetospeed "Magneto Mount' Gen III. Hold your chronograph without the POI shift! Check this bad boy out.

    Count me in for one!
  2. A

    Bix’n Andy r700 Benchrest trigger

    F/s bix’n Andy balltrigger it is a single stage adjustable sear Benchrest model per the guys at bulletcentral ($405 new) comes with three springs for three different pull weight ranges from 1oz up to 25oz total and Allen key for pull weight and sear engagement adjustments trigger has some wear...
  3. A

    Athlon Cronus BTR aprs with extra $1150

    Athlon Cronus btr with the .2mil cross APRS reticle will include a mkmachining carbon fiber throw lever and a sunshade. there is a small scratch on the sunshade only (pictured) that ends up on the underside when installed scope itself is in excellent condition and will be shipped in the...
  4. A

    Seekins rings

    Keeping for now PayPal f+f or buyer is responsible for fees
  5. A

    6.5 Creedmoor Bulk Ammunition

    Targetsports is less than an hour from me I have ordered a ton of 140eld and American gunner from them and have nothing but positive expierence the American gunner has shot well for me out to 600-800yds not excellent but it’s great practice ammo I stock up when I find it under 150$/200
  6. A

    options to get .004 neck tension?

    How much neck tension would you get if you remove your expander ball with the die you have? My cheap RCBS die would give like .006nt without the ball on hornady brass so assuming you can get enough tension from your current die just chuck your expander ball in a drill and use some polish or...
  7. A

    RPR 338 damaging brass

    I get a small dent in the same spot on my creedmoor brass from it slamming the inside of the reciever on the way out looks to me by the direction of the marks the same thing is happening but I’m not familiar with the rpr design if It has a plunger ejector see if the brass slams the inside edge...
  8. A

    options to get .004 neck tension?

    I know you could get a bushing die and get the appropriate size bushing to give you .004nt just use it without the expander ball Or turn your expander ball down somehow
  9. A

    6.5 Creedmoor three way trimmers other than Giraud?

    Look into the trim-it2 same cutter assembly I heard and easy adjustment I am very happy with it but any 3 way cutter will not chamfer or debur without some cutting I’m not sure what you mean by that but I chamferred and deburred all my virgin Lapua with it I just take a .001-.002 pass whatever...
  10. A

    Gunsmithing Remage barrel options

    I just did a nucleus/nss criterion 6+6.5creed and ordered a button rifled Rock creek about a 9momths ago I put on a defiance deviant that I’m just getting up and running and I can say Moving forward I will be going the NSS route it was half the price and the performance precision wise is the...
  11. A

    Gunsmithing Home set up for changing barrels on bolt actions with limited space

    I grabbed a “Ross vice “ from a member here for doing prefit/remage changes 1-3 times a year it’s perfect for someone like me a hobbyist who needs it every now and then and dosent need something as robust as the sac I think I paid $80 shipped to me the big selling point for me was the two 1/2”...
  12. A

    Rifle Scopes Losing focus

    I I had this problem for a while with two lower dollar scopes I owned earlier on I just gave up trying to correct it and I don’t wear glasses or anything it took me way longer than I would like to admit that it was happening after more time on the gun because I was heating the barrel up over...
  13. A

    Did I Screw Up New Lapua Brass?

    I’m sure they do the same thing just a higher surface hardness the 21st century were just half the price if I remeber correctly so I went that route
  14. A

    Did I Screw Up New Lapua Brass?

    Just went through the same thing I polished the stainless mandrel and it helped but ultimately ordered the 21st century TIN coated mandrels which as someone said made it much more forgiving and the brass dosent stick to the mandrel which caused those gauges for me I wish I took a pic but I had...
  15. A

    Nucleus Light Primer Strikes

    I got the area 419 bolt knob not sure if it’s what your looking for but it was a. Huge improvement for me
  16. A

    6.5 CM CBTO

    I would say you got it idk what the chances are but that’s the same measurement as me also I’m loading them .020 off the lands after looking around this site everyone seemed to be loading them .015-.030 so I started with .02 and even after a seating depth test it was my best result
  17. A

    6.5 CM CBTO

    I’m not the best person to tell you if it’s acceptable or not as I don’t know much but I just did the same thing with a new barrel last night 140eld with the hornady tool and I have been told if your not careful you can push the bullet into the lands .005+ with too much pressure but when I did...
  18. A

    Nucleus Light Primer Strikes

    I don’t have enough rounds through it with the 19# to know if it will now work 100% with cci450s I bought a few thousand 205m’s to try and avoid problems but the 19# spring has almost stopped the cratering I was getting with my nucleus entirely and was 100% reliable over 100 rds so far...
  19. A

    Rifle Scopes Which Athlon scope for 22lr

    Talk to the Doug at cammera land there’s a very good reason he has sold to A LOT of the members here scopes Don’t pm or post in the forum pick up the phone and call he gets my money every time
  20. A

    Nucleus Light Primer Strikes

    It was virgin brass so that may be a factor but the virgin brass is all within 1 thou of what I bump my shoulders to max difference between the rest of that lot virgin and the 1xfired is .003 it was the first round of the day also the first round of small primer brass I loaded that night so I’m...
Top Bottom
Back
Home
Forums
Merch
Alerts