• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. TylerN

    Accuracy International Picture Thread

    7 PRC is a good option for banging steel at those distances.
  2. TylerN

    Rifle Scopes LPVO or Red dot/magnifier for SBR

    the ATACR is better than I thought it would be on an SBR. Balances well, the 1X eye box it's fairly forgiving, and the illumination is bright enough for all daylight conditions.
  3. TylerN

    Spotters Spotting Scope Setups - Show Em!

    It's from True North Raven.
  4. TylerN

    6mm Dasher

    I might also recommend trying a lighter load for a first firing with Petterson. I haven't shot any before but each 6 Dasher Petterson case I've seen looked like it may need a fair amount of firing forming. The neck-body junction is extremely round and maybe the shoulder needs to push out some...
  5. TylerN

    22BR Custom Build

    I use .255" necks in my 22 BRA reamers which works well with both Lapua and Alpha brass which both measure .251" loaded.
  6. TylerN

    22 dasher build.

    The short 22 Dasher build sounds like a fun project. I've been happy with the .255" neck but Ray's probably right and a .253" would work but be tight. However I like the extra little bit of clearance and .255" or even .254" would be my pick. The 85.5gr LRHT are also jump tolerant so maybe...
  7. TylerN

    22 dasher build.

    I went with a 0.255" neck to avoid turning necks. Both Alpha and Lapua brass measure 0.251" loaded from memory. So the 0.255" neck works with either and avoids the need to turn necks. I've used Lapua before and the current brass I'm shooting is Alpha. With either brand I start with a 6 BR...
  8. TylerN

    Spotters Spotting Scope Setups - Show Em!

    Cheapo Bushnell Tactical works great for my needs. Vortex Impact for the occasional time I need a range. Triad Tactical cover to to hide my poverty spotter. RRS Tripod and tilt pan thingy. True North Raven tripod cover with a grenade pouch that holds a clicker and kestrel pouch. Had an old...
  9. TylerN

    22 dasher build.

    In a 22 I shoot a BRA and not Dasher. I have two reamers, a long 0.160" which I got to try 95 SMKs and a 0.130" for 85.5gr Bergers or 90gr SMK. For the reamer I'd go with a FB in the 0.115" to 0.130" range for the 85.5gr and similar projectiles.
  10. TylerN

    Accuracy International Picture Thread

    Mbe engineering. You have to email him and he will invoice you for international shipping.
  11. TylerN

    Accuracy International AT-X

    Mlok is great on carbines with skinny barrels and light weight handguards. It's not so great on precision rifles since the hardware protrudes into the barrel channel. The AI keyslot is technically better for precision rifles which use heavy barrels and have thick walled handguards. But it has...
  12. TylerN

    Accuracy International Picture Thread

    Thanks, it's graphite black, noveske bazooka green and sig gray.
  13. TylerN

    Accuracy International Picture Thread

    I never put the stock on the scale but it feels the same as the old AT-X stock.
  14. TylerN

    Accuracy International Picture Thread

    *again
  15. TylerN

    Accuracy International Picture Thread

    If you told me those were made in a shed I wouldn't doubt you.
  16. TylerN

    Accuracy International Picture Thread

    Im in the full quiet camp. Magnus SR.
  17. TylerN

    No Fee for Surppressors or short barrell rifles

    I never cared about the $200 fee when making already expensive purchases. The NFA registration and classification is what was meaningful and that's unchanged.
  18. TylerN

    Dillon 550 sizing and seating on Rifle

    I was using Redding die wax. Use it sparingly and maybe clean out your funnel every few hundred rounds to prevent it gumming up. Once you build the muscle memory with the 550 you won't want to go back to single stage. You can load rounds that perform equally as well in less time. It's 100%...
  19. TylerN

    Dillon 550 sizing and seating on Rifle

    That is what I do to prevent corn cobb or whatever media stuck in the flash hole. Tool head #1: - Station 1: Full-length neck/body sizing die with decapping pin. - S2: mandrel Clean with the ultrasonic every time. Occasionally tumble to polish up the brass. Anneal every time; usually all the...
  20. TylerN

    Dillon 550 sizing and seating on Rifle

    I loaded thousands of rounds this way and can state it will work well. The biggest downside I found was that excessive case lube would cause powder to occasionally jam up the powder funnel which would usually mean the powder dumps all over the place on the downstroke. I found using die-wax and...
Top Bottom
Back
Home
Forums
Merch
Alerts