• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. TylerN

    112 Match Burners Inconsistent as Cr@p!?

    I've shot several thousand over the past few years and they've met my needs for banging steel and PRS type shooting.
  2. TylerN

    AXSR POI shift with caliber change.

    Weird, I guess stick with the barrel or sell it if it's an issue.
  3. TylerN

    AXSR POI shift with caliber change.

    A few tenths has been my experience also. 2.7 mils is excessive, if it’s bothering you maybe see what AINA says.
  4. TylerN

    Accuracy International Picture Thread

    For lefties you can either buy the bolts or the rifle but the laws of AI forbid you from owning both at once. :p
  5. TylerN

    6mm Dasher

    I tested n150 in a prior Dasher barrel with heavier 112gr match burners and found it was 1:1 with Varget. Same charge gave that same velocity. With n140 I'd be very hesitant to assume it's 1:1 with Varget unless I was shooting very light projectiles like an 80gr. Either way work up, it's...
  6. TylerN

    Accuracy International Picture Thread

    That's my trick for how I got my 2nd ATX bolt. Paid $1k and it arrived 13 months later :p
  7. TylerN

    300 Norma Mag

    It will make a really big boom of things go horribly wrong. But using a very slow burning powder like n570 I've found my 300nm to be the most forgiving round to load. I've never had high pressure signs because I think it might take seriously compressed loads to exceed pressure limits. Also...
  8. TylerN

    Accuracy International Picture Thread

    The Keymod +2 fits the AI keyslot. I briefly used the +2 and had no issues attaching it before deciding I didn't have a use for it and relegating it to the parts bin.
  9. TylerN

    6mm Dasher

    Nope. I’ve shot thousands of 112’s and recently started shooting some 115 DTACs. As Lightning8 said I see the same thing. All the local shooters shoot 105’s and a few shoot 109’s. Unless the distances push out past 1k I hardly notice a difference in wind calls or energy with any of those so...
  10. TylerN

    AIAT - barrel won’t come off

    Maybe try a strap wrench on the barrel if it doesn’t have flats. Or bust out a barrel vise.
  11. TylerN

    Accuracy International AT-X

    The stock 49 or whatever the nearest fixit stick works for me. My first shot is usually 0.2 mil low and I'm not sure if that's the barrel or suppressor seating or barrel fouling or all the above. My RTZ is consistent so I have seen a need to try any different torque settings.
  12. TylerN

    AT-x--6BR magazines?

    I have both Gray Ops BR mags and HRD kits and can confirm both option run great in my ATX with a Dasher. I’d probably trust the Gray Ops more with a shorter body or OAL BR.
  13. TylerN

    Giraud Power Case Trimmer Ya, Nay

    I've had a Giraud for years and it's been good. Some good info in this thread also about the Henderson. I think you can't go wrong with either. Also as a side note I got away from trimming every load awhile ago and moved to rarely trimming when necessary and have no intention to go back. I...
  14. TylerN

    22GT load data

    0.305 is a rough starting G7 I get using Strelok to convert the multi G1 into a G7.
  15. TylerN

    300 Norma Mag

    Also just because you have a 10 round mag doesn't mean you should shoot 10 round strings. That was my n570 mistake; after 10 rounds the barrel is about to melt into a puddle of steel.
  16. TylerN

    300 Norma Mag

    Freebore is whatever AI uses PLUS whatever n570 has burned away. With 245's I was getting 2900 fps but my 27" barrel has lost a ton of speed. I would guess a new barrel should be around 3k.
  17. TylerN

    .22 BRA

    Have you fire formed a lot of brass with the barrel? I've had barrels do that after jamming a few hundred false shoulders. In my case I think the neck shoulder junction was rounding out with use and the crush fit was becoming loose.
  18. TylerN

    Official Accuracy International AT-X

    20.8 lbs. No weights. MTU barrels, ZCO 5-27, DA Nomad-L (steel.)
  19. TylerN

    7mm PRC

    I'll join in this H1000 love fest, my current load data: 67.2gr of H1000 Peterson brass Berger 190gr LRHT Fed 210 27" barrel. 2,915 fps. It doesn't seem like a hot load, easy extraction and no primer pressure signs and it's been good in the rain. I never pushed past 67.6gr since the speed...
  20. TylerN

    Lapua announces 6mm Dasher brass

    Ok cool. Woulda been much cooler if they launched this a long time ago.
Top Bottom
Back
Home
Forums
Merch
Alerts