• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

  1. G

    Gunsmithing Build am AR repair kit

    This box contains multiples of every spring in an ar lower. I also threw a few of the various detents in. this is probably the most important stuff. Spare bolts, bolt cam pins, extractors, firing pins, firing pin retainers, gas rings, and extractor springs. I Also have a couple carriers...
  2. G

    Gunsmithing Shorten Action screws

    I used a cutoff wheel in a die grinder. Be real careful and you will be able to clean up the threads with a good file. Ideally you would use the proper die to clean up the threads
  3. G

    Group Buys Aadland group buy

    Order placed. Thanks!
  4. G

    Rifle Scopes Scope for 22LR

    I have a 3-15 razor LH on an immaculate Remington 541-S. Only the 3-15 has side parallax. The lower powers do not for those wondering.
  5. G

    Rifle Scopes Scope for 22LR

    The LH is their high end hunting scope, and not a direct competitor to the Gen 2 Razor long range models. It has the same excellent glass with a 1 inch tube and side parallax. Reticle options are limited though, and lacks illumination. It is very light.
  6. G

    Rifle Scopes Scope for 22LR

    Keep your eyes peeled for a 3-15 vortex razor HD LH. Awesome scope that can be had for around $500 on the used market.
  7. G

    308 Reduced Recoil Load for Kid

    125 grain ballistic tip pushed by 41 to 42 grains of xbr 8208. Very mild. The faster 8208 will perform well in that shorter barrel with the light bullet, and still fill the case decently.
  8. G

    Optics FLIR T50 for sale

    It's collimated properly, but I've never used it in front of a scope with an objective that big. I'll try it out tomorrow. They aren't intended to be used much over 5x.
  9. G

    Optics FLIR T50 for sale

    Here's a pic of it on one of my 16 inch ar's in front of an older USO SR8-M scope. Price reduced to $3800
  10. G

    Optics FLIR T50 for sale

    Cant quite do 3k.
  11. G

    Optics FLIR T50 for sale

    Straight clip on model.
  12. G

    .270 vs 6.5 CM for Hunting 25 - 300 meters

    The game animal will never know the difference between the 2.
  13. G

    Optics FLIR T50 for sale

    Excellent condition T50 clip on thermal for sale. This model has the IR laser that operates in both low and high power modes. Will ship in a pelican 1200 case with manual. Asking 4k obo.
  14. G

    155gr lapua scenar loads?

    Chrony'd 5 rounds today. Rifle and ammo had been sitting in my pickup at my farm for several hours and it was a pleasant 22 degrees. Averaged 2965 with an SD of 10.2.
  15. G

    155gr lapua scenar loads?

    Same Here. I load 44.4 grn 8208 in lapua brass lit by a federal 210M primer. Bullet is set ten thousandths off the lands. Dope to 700 says 3k fps out of a 22 inch bartlein gain twist barrel. I just picked up a magnetospeed so will be confirming velocity asap. Seems high, but the dope don't...
  16. G

    Range Report Looking for a different 308 load

    Factory loaded hornady 178 grain ElD loads are exceptionally accurate and more than capable of 1k yards in my experience. I'd still be using them if I didn't reload.
  17. G

    Gunsmithing Appropriate freebore for barnes .264 127gr LRX

    I too have found my best results .050 to .060 off the lands with the barnes TTSX and LRX bullets.
  18. G

    Factory remington 700

    Have an older pss in .300 mag. I lapped the bolt lugs, bedded it into its Hs precision stock, and cut and threaded the barrel to 24 with a new crown. 3/4 moa all day with black hills 190 match