• Get 25% Off Access To Frank's Online Training

    Use code FRIDAY25 and SATURDAY25 to get 25% off access to Frank’s online training. Want a better deal? Subscribe to get 50% off.

    Get Access Subscribe

Search results

Search the forum Search Articles
  1. 2

    MOLY COATED OR NOT?

    Re: MOLY COATED OR NOT? Country-- whose coating equipment are you using? NECO?
  2. 2

    new to reloading, hornady or rcbs?

    Re: new to reloading, hornady or rcbs? Redding Big Boss
  3. 2

    Anyone run a dehumidifier in their reloading room?

    Re: Anyone run a dehumidifier in their reloading room? aloreman---where do you run the groundwire to? a waterpipe, metal rod/pole anchored into floor, groundline off electrical wall outlet?
  4. 2

    JP silent captured spring

    Re: JP silent captured spring Jevan-- I too am int. in this JP product. The website indicates an improvement in sound and smoothness. I presume the recoil is still there just smoother.
  5. 2

    Les Baer rifle

    Re: Les Baer rifle If possible confirm the cond. of bbl with a Hawkeye bore scope. A krieger/ Bartlein replacement bbl will not be cheap. If low round ct. that is a good buy.
  6. 2

    my new action

    Re: my new action I also vote for the new Norma magnum cartridges over the 30-378 Wthby. I only wish Lapua had beat them to the punch.
  7. 2

    ***Long Action/Mag Bolt Face choices!! HELP....

    Re: ***Long Action/Mag Bolt Face choices!! HELP.... Jake-- You're on the right track. How large is the budget for the complete rifle ( minus scope)? Are you considering a switch barrell rifle? Do you need a repeater? Do you have an overall length/weight consideration for the weapon? Are you...
  8. 2

    What is type of "fill" for a McMillan stock?

    Re: What is type of "fill" for a McMillan stock? Wrenchhead raises an important point to consider: weight distribution of your completed rifle. In my early years I always used 100% (solid chopped fiberglass) from butt to foreend tip. Makes for good shooting off a pedestal rest; not so good...
  9. 2

    Good bore scope?

    Re: Good bore scope? Spent lots of time using a Hawkeye w/ RA adapter. Top quality--not cheap.
  10. 2

    Gunsmithing trimming bottom metal screws

    Re: trimming bottom metal screws screw two corresponding hex nuts onto the bolt. Adjust the 2nd installed nut to expose the threads to be cut-off. Tighten the 1st nut behind it to lock it in place. Take a pair of visegrips and clamp onto the two nuts. Holding onto the bolt with the visegrips...
  11. 2

    Rifle Scopes Nightforce Advice

    Re: Nightforce Advice Second the 5.5 x 22. I prefer the 50mm (true 1 piece tube), the clarity ,however, may be slightly better with the 56mm. Don't forget to match turrets to reticle ( moa vs. mil).
  12. 2

    $ 4,000.00 Want a semi auto .308 which platform

    Re: $ 4,000.00 Want a semi auto .308 which platform jp lrp 07
  13. 2

    FN SPR

    Re: FN SPR I have 2 spr's. I prefer the 20" model esp if you desire to use a suppressor in the future. Only complaint is that shifting the safety from forward (fire) position to cam back the fp is technique sensitive; i.e.,using my right hand it will not cam back. If I reach up and over with...
  14. 2

    Weight Sorting brass & different powder charge ?

    Re: Weight Sorting brass & different powder charge ? x-rob---In time you will reach similar conclusions to those voiced here. Why? Your time is your most valuable commodity. My conclusions: 1)Remington brass tolerances (wall thickness) and loaded Rem 308 match ammo tolerances(bullet runout)...
  15. 2

    6BR Bullets and BC's

    Re: 6BR Bullets and BC's X-fan That's some serious shooting. I have never shot a group that small . What rifle are you using? What brass? Need details. Thx.
  16. 2

    300WSM Dies

    Re: 300WSM Dies GardDog--why do you think the steeper shoulder 300WSM needs bumped vs. the 308? Higher pressure? Softer brass? Oversized chamber? Just curious.
  17. 2

    best heat source for annealing?

    Re: best heat source for annealing? Your best (consistency & adjustability) results will come from the annealing machines designed and sold for rifle brass annealing. Not a bad idea to go in with a friend for your purchase--it will sit unused between annealings. The machines are easy to...
  18. 2

    Sidearms & Scatterguns Tanfoglio aka Witness

    Re: Tanfoglio aka Witness My 38 super witness match (pre-rail) is one of the most pleasent pistols I own due to the accuracy ,precise trigger and low recoil. Its only drawback is the size(concealability) and my inability to continue sight focus thru a full hi-cap magazine. It's also a...
  19. 2

    Rifle Scopes wire vs etched reticle-new vortex scope

    Re: wire vs etched reticle-new vortex scope To the question of wire vs. etched, my understanding is that an etched lense is more durable. At the same time, any dust particle that lands on the lense will be noticible---doesn't happen often. Frustrating when it does.
  20. 2

    What's your favorite barrel contour?

    Re: What's your favorite barrel contour? mtu
Top Bottom
Back
Home
Forums
Merch
Alerts