Search results

Search the forum Search Articles
  1. 21Bravo

    Rifle Scopes Leupold MK4 elevation bottomed still 1 min high

    Re: Leupold MK4 elevation bottomed still 1 min high <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: merlinn</div><div class="ubbcode-body">How would switching the rings affect that?? Would you be looking for a variation in tolerances to change the angle to a small...
  2. 21Bravo

    Range Report Eight years old---First time at 200 yards

    Re: Eight years old---First time at 200 yards That's cool. My son is only 3 1/2. I look forward to spending days at the range with him. Not to mention the added bonus that Mom will likely be less enviable of my range trips!
  3. 21Bravo

    Rifle Scopes Leupold MK4 elevation bottomed still 1 min high

    Re: Leupold MK4 elevation bottomed still 1 min high Have you tried switching the rings? As in, swapping the front ring with the back ring? The scope must be on a cant to cause your problem, the ring swap may not be the optimum answer as in, it may then decrease the elevation available but...
  4. 21Bravo

    Suppressors Suppressor Effect on Accuracy?

    Looking for feed back on what you experienced regarding the impact adding a suppressor to your bolt gun had on it's accuracy. I'd like to obtain enough feedback to establish which way adding a suppressor goes (improved groups vs. degrading groups). Obviously, maybe not so obvious, there will...
  5. 21Bravo

    Can anybody confirm velocities from a REM LTR??

    Re: Can anybody confirm velocities from a REM LTR?? That's probably right. My LTR low node is as follows: 168SMK 43.8 Varget Lapua brass BR-2 prmr 2.801 to tip, 3.231 to ogive with comparator (I don't subtract the added length of the comparator (just read the dial). Vel 15' from muzzle...
  6. 21Bravo

    Gunsmithing Bolt face for .22-250 the same as .308?

    Re: Bolt face for .22-250 the same as .308? I was thinking the same thing regarding twist. Thanks for the replies!
  7. 21Bravo

    Gunsmithing Bolt face for .22-250 the same as .308?

    I've a chance to get a good deal on a Remington 700 in 22-250. I'd probably shoot it a little to see what it will do then end up sending it off to GAP for a build into a .308 gun. Do 22-250 and .308 share the same bolt face dimensions? Thanks a lot, 21Bravo
  8. 21Bravo

    Gunsmithing Tubb's final finish lapping bullets; lets hear it.

    Re: Tubb's final finish lapping bullets; lets hear it. Tag. I'm interested in the results as well. I'm contemplating using Tubb's on a LTR .308. 21Bravo
  9. 21Bravo

    Suppressors got my new can!

    Re: got my new can! Congratulations. I've had my Trident9 for about 18 months. It's super quiet on a Glock 17. It's definitely a hoot on the M16/9mm. 21Bravo
  10. 21Bravo

    Hunting & Fishing Good accurate .308 hunting bullet (Whitetail)?

    Re: Good accurate .308 hunting bullet (Whitetail)? Thanks for the input fellas. I think I'm going to give the 165 SGK a try first. Craig
  11. 21Bravo

    Hunting & Fishing Good accurate .308 hunting bullet (Whitetail)?

    I know each gun is different but thought I would ask and see if I could narrow the field a little. First off, I'm shooting a factory barreled Remington LTR .308. It's a .75-.80 MOA gun with Lapua brass, 168gr SMK, BR2 primer and 43.8gr of Varget loaded to 2.800. I have a bunch of Hornady...
  12. 21Bravo

    Suppressors Suppressed Glock 17..What recoil spring?

    Re: Suppressed Glock 17..What recoil spring? He'd just need to get an aftermarket guide rod and perview the assortment of spring weights available. Should be easy enough to google but I believe the factory spring weight is 17 lbs for Glock 17s However, provided his suppressor has a linear...
  13. 21Bravo

    Suppressors Major Malfunction Suppressors

    Re: Major Malfunction Suppressors That is my experience also, hence my post here. I generally don't post such things as I don't want someone to interpret it as a negative post which it definitely wasn't intended to be so. I just missed him on my previous attempts. I've done a lot of...
  14. 21Bravo

    Suppressors Major Malfunction Suppressors

    Re: Major Malfunction Suppressors Got him via the Silencer Talk PM route. Thanks for the help fellas
  15. 21Bravo

    Suppressors Major Malfunction Suppressors

    Re: Major Malfunction Suppressors If his voice mail had not been full I would have left a message, that's what prompted me to post this. I was becoming concerned something was wrong since I had emailed him a couple of times in the last two weeks without response. I PM'd him from silencertalk...
  16. 21Bravo

    Suppressors Major Malfunction Suppressors

    I've been trying to get a hold of them for via email and phone, voice mail full. Anyone know what Bryon's status is? I know he's an Officer in the Army Reserve, maybe he's at AT. I've bought from him before and he even called me back while on vacation in Hawaii! So, I know he's generally...
  17. 21Bravo

    Significant SD Velocity Spread..ideas?

    Re: Significant SD Velocity Spread..ideas? Let the Chargemaster warm up for "3 hours", really? Surely, it hits it's "warmest" temperature in less than 3 hours? I can see 30 minutes or maybe an hour. Does it really take 3 hours? That wouldn't be too troublesome if I were going to load...
  18. 21Bravo

    Significant SD Velocity Spread..ideas?

    Re: Significant SD Velocity Spread..ideas? After finding this article http://www.snipercentral.com/matchammo.htm My SDs and ESs aren't as significant as I initially thought. Although, I'm going to try to tweak some things to see what happens. I did shot some new Lapua brass today and my...
  19. 21Bravo

    Significant SD Velocity Spread..ideas?

    Re: Significant SD Velocity Spread..ideas? I'm going to order some new Lapua brass and see how that does. If nothing else, out of curiosity and for future reference. I'm also going to see what the results are after I anneal some of this brass. It might be a couple of weeks but I'll post the...
  20. 21Bravo

    Suppressors Suppressor significantly reduce recoil?

    I've been contemplating getting a .308 suppressor but haven't decided to drop the coin yet. I'm trying to gather pros and cons. The only con I can think of his the cost of the suppressor. I'm not a big dude at 5'10 160lbs. So, even a lighter .308 like an LTR beats me up over a range...
Top Bottom
Back
Home
Forums
Merch
Alerts