Search results

Search the forum Search Articles
  1. M

    ZCO doesn’t keep zero

    threads like these are why ive purchased 3 "broken" scopes off people rifles and put them into play in the next match without issue lol scope issues do happen, but there are a bunch of things that better be squared away first one guy complained about his "broken" very popular/reliable scope...
  2. M

    Does "Over-Annealing" Impact Shot Dynamics?

    ive annealed with an amp every firing for many years and havent seen velocities trend up or down when using a large enough sample to capture the true avg that said ive never specifically tested for it, i just ran an labradar any time i was truing/confirming dope over the life of barrels 2 main...
  3. M

    Suppressor throwing off accuracy?

    sucks to see not much has changed over there from my dealings with them
  4. M

    Suppressor throwing off accuracy?

    I had a direct thread YHM phantom Ti back in the day that made every barrel (3-4 different ones) I put it on shoot like yours…basically 1-1.5moa at best, on precision bolt guns different loads made it no better Same barrels shot great w/ my sico omega and hybrid w/ either direct or brake...
  5. M

    Unreliable AI AT Magazine, Aftermarket Options

    no, theyre AIAW mags, not AICS pattern stagger feed, not center
  6. M

    Unreliable AI AT Magazine, Aftermarket Options

    idk if there are any aftermarket AT mags...never needed one but you can take the follower/spring assembly out of yours and bend it to your liking if you think thats the issue you can stretch it to make it firmer overall or bend it so the front/rear has more/less pressure
  7. M

    Are Berger bullets really better?

    I started competing with hornady’s…Won a lot with them Switched to bergers for a couple years…won more often, hit % went up Went back to hornady for a couple years…still won but less often, hit % dropped a little, and i had more misses I knew wasn’t me Went back to bergers…hit % went right...
  8. M

    The "a chassis should not need to be bedded" myth........

    It won’t hurt nothing to shoot it that way IMO, but I’d always tend toward bedding before material removal
  9. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    https://www.snipershide.com/shooting/threads/foundation-stocks-people-are-bedding.6931680/post-7878088 i basically just fill the recoil lug area and skim bed the rest...on a chassis with little support area for bedding material down the sides of the action, i just bed the front and rear pads...
  10. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    i had a rifle take a similar fall said scope on that rifle came with the bungee style scope caps/covers... pre fall, the scope covers fit between the objective and rail...post fall, it wouldnt fit everything still felt tight, so i shot it anyways...zero had shifted like .5mil elevation and...
  11. M

    What Percentile of Shooters Can Shoot 1 MOA?

    i agree...and a large part of being able to shoot well consistently is knowing how to set up to be successful...which either comes from experience or someone showing you (if you're new/learning) ive taken my wife to the range who has probably shot less than 100 rifle rounds in her life and with...
  12. M

    AI AT Elevation issues at 1000yards?

    if the quick lock was the issue youd see it at any/every distance ive ran my AT quicklock at 65 in lbs since 2014...no issues, and i know of 5+ others the same the quicklock would be the least of my concern
  13. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    An impact/jostle puts a slight bind/tweak on multiple parts with space to shift that is resettled after the firing explosion/recoil When testing chassis bedding/POI shifts pre-bedding, I could move my POI around in various directions depending on which way i struck the barrels Some directions...
  14. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    If I’m following you correctly…what you mention is why I always fully seat all mating surfaces of rings caps and clamps before torquing screws to make sure they don’t tighten “artificially” from small misalignments, friction, etc before fully seating…and are only held by the respective clamping...
  15. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    My AIAT and 2 buddies held like my bedded rifles, no issues All bonded
  16. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    The action inlets are cut specifically for the brand/action type and very tight fitting to the point of u usually have to squeeze the action down into them a bit Not like a standard rem700 footprint chassis where pretty much any rem700 style action will fit because it’s just sitting in an...
  17. M

    Rifle Scopes Seven Scopes with Issues or Something Else

    ^^ seen the same and reported it here over the years in “chassis bedding” threads I’ve never purposely dropped my rifle from 12” while transitioning, but I don’t baby them either so I’m sure it’s happened naturally…when testing chassis bedding I literally grabbed the stocks on all my rifles and...
  18. M

    130 vs 140+ class bullets for PRS

    it wasn’t much difference to me, I shot either I ran the 130 AR hybrids for a year or so when they first came out The last year I shot 2 day matches… 1st: 6mm/108/3k fps 9th: 6.5/140/2750 fps 2nd: 6.5/130/2900 fps 17th (finale): 6.5/140/2750 fps (different rifle and bullet than the previous...
  19. M

    DO i really need a Kestrel?

    Ballistic AE
  20. M

    Hornaday 4DOF APP

    assuming your app is the same as mine... if youre just cloning the profile and selecting BC instead of 4DOF, it changes the bullet selected to a different bullet in the same caliber family why idk, but double check your actual bullet in the BC calculator...maybe a bug...maybe the app doesnt...
Top Bottom
Back
Home
Forums
Merch
Alerts