Search results

Search the forum Search Articles
  1. RanchhandTCR

    Threading Chatter and ect.

    Currently I'm messing with old barrels so I'm only have 2-2.5 inches sticking past the chuck and I try to keep the too as close to the holder as I can. With such little odf the work piece sticking out my tailstock interfere with the tool. I haven't messed with leaving the threads engaged.
  2. RanchhandTCR

    Threading Chatter and ect.

    I've got it set at 40* at the moment I haven't played with the gib angle on this last go around
  3. RanchhandTCR

    Threading Chatter and ect.

    I've done it with chrome molly and stainless and still have the same issue. I haven't tried to lock the gib slide... at the current moment I'm gonna have to go look to see if it's got a way to lock it... (light bulb) Thanks for the post
  4. RanchhandTCR

    Threading Chatter and ect.

    I've done that too still have chatter! Thanks for the post. Definitely tried alot of things I could think of!
  5. RanchhandTCR

    Threading Chatter and ect.

    That's a piece I failed to mention I've done as little as .002" cuts on stainless steel... and still get chatter.. the lighter cuts do keep it minimal. Thanks for the post!
  6. RanchhandTCR

    Threading Chatter and ect.

    Afternoon guys.. So I finally got my hands on a lathe... super dangerous I know. Before yall roll your eyes to hard I know enough to get myself into trouble. (Continue eye roll) Any how I've been trying to resolve what is left of my lathe chattering issue while threading. Its extremely mild...
  7. RanchhandTCR

    How do you use your support hand on barricades?

    I avoid resting my hand on top of the optic as I have had poi shifts from the weight... so I try to rest with my hand running along the chassis or if it's a full length covered for end ill put my hand on that if it's necessary
  8. RanchhandTCR

    Is body armor necessary for a civilian?

    I have lvl 4 plates in a carrier set up for something that will likely never happen and I completely understand ill probably be dropped like a rag doll in the first minute of conflict.. How ever....your gonna have to shoot me somewhere else besides the chest and back or with something that is...
  9. RanchhandTCR

    New Sig CROSS

    Then it's not head spaced correctly... most factory ammo is way under sized as far as the cases are just like brand new brass. Adjust the barrel so it closed the bolt on go. I haven't experienced any if this with my factory 6.5 barrel and I'm checking 130 otms at 2740 unsurpressed and 2790...
  10. RanchhandTCR

    ARC Coup de Grace Builds

    Good ole Rio Salado sportsmans club.
  11. RanchhandTCR

    New Sig CROSS

    Does the bolt close easy with loaded ammo or does it have resistance? Have you chronoed your ammo ad well? With 140s I peak at 2690 fps
  12. RanchhandTCR

    New Sig CROSS

    I load heavy at 43.2gn fir 130s and 42.2 for 140s.. are you loaded close to tge lands?
  13. RanchhandTCR

    SBR suppressor durability

    For.me the best can with the least flash and first round pop has been the Thunderbeast ultra line.. I haven't had a chance to use their dominius surpressor. Life span is subjective to several factors and one being the fire rate and how hot the surpressor gets. I've got over 6k rounds on my ultra...
  14. RanchhandTCR

    A clever young male

    Lmao I'm just glad my turbo didn't inhale my filter with all the bull shit they stuffed in my air box...run away engines are not fun.
  15. RanchhandTCR

    6.5 creedmoor ar10 won't shoot plz help

    Red is difficult to remove you could use blue if wanted still takes heat and a wooden rod.Yes you just do the od of the tenon... dont have to use a ton a little goes a long ways.. i stay near the front shoulder so it doesn't get into the chamber or bolt. . if you are not useing a silent capture...
  16. RanchhandTCR

    6.5 creedmoor ar10 won't shoot plz help

    By removing the retaining pin for the buffer spring it allows the buffer to rest on the carrier rather than the carrier being shoved into the buffer. It will have constant contact with the carrier. The locktite on the barrel tenon semi permanently glues it to help with harmonics and shifting...
  17. RanchhandTCR

    A clever young male

    These fellas are sabotage experts... you don't know your screwed until you are pulling a 5% grade with 18k lbs on a trailer and wondering why you can only do 5mph and your egts are high...
  18. RanchhandTCR

    6.5 creedmoor ar10 won't shoot plz help

    The brass is not the cause.. besides the barrel what do you have for a buffer and do you have the buffer retaining pin removed? (I know others have there oppinion) how ever I consider this to be a huge cause in how consistent bolt dwell time is. I also redlocktite the tenon on my barrels when...
  19. RanchhandTCR

    Trying to mount an rmr but can’t

    Buy a plate to make wrong optic work for half the cost of the optic... or sell for a slight loss if any and purchase the correct optic.........we make mistakes but it's the cost of being alive and playing the game..
  20. RanchhandTCR

    New Sig CROSS

    Any one nice enough to let me know what the barrel tpi is to thread the barrel.. not muzzle.. left my damn tpi gauges at work and that's a 3 hour round trip.
Top Bottom
Back
Home
Forums
Merch
Alerts