• Quick Shot Challenge: What’s the most underrated gear you never leave home without?

    Contest ends Wednesday, join now for the chance to win free Hide merch!

    Join contest

Search results

Search the forum Search Articles
  1. M

    Seeking scope recommendations (w/Mil-Dot reticle)

    I'll suggest the Nightforce atacr as well, the mil-r is un-busy, but I would say to seriously look at the T3. Not dialing is faster than dialing, and the build in wind dots work well. My eye is quick to sort and the T3 reticle becomes very usable after you understand it. I'd say look at them...
  2. M

    Failures with drop in triggers

    Way back in the day I had a Timney drop in that failed a hammer spring. I believe at the time I had to send it in, and they repaired it. Not too many places offer replacement parts for drop-ins. I have a couple of the AR Gold triggers, I think I have 6 of them, that came in Larue rifles, they...
  3. M

    OBR 7.62 and non-Larue Suppressors

    So I/we were partially correct about "back pressure" :D
  4. M

    8.6blk bullet strike Help

    Well those maker bullets say not to run in 1-3 twist...so likely it's those
  5. M

    8.6blk bullet strike Help

    Gorilla has two 285 loads, one for 16" barrels and one for 12" or 8" barrels, given the groups you may have the wrong one?
  6. M

    8.6blk bullet strike Help

    This one?
  7. M

    8.6blk bullet strike Help

    What specific bullet and brand?
  8. M

    8.6blk bullet strike Help

    I'm not a 8.6 blk specialist but it is most likely 3 twist and the specific bullet. With some impacts looking normal and some not, I lean toward bullet integrity failure. What bullet? Is it subsonic or super?
  9. M

    8.6blk bullet strike Help

    The bullet is key holing, and is not stable in flight, essentially tumbling in the air. What's weird is that some seem to be fine.
  10. M

    OBR 7.62 and non-Larue Suppressors

    I think the mini was very manageable as far as gas goes. The gun did dirty up fairly quickly, I wont lie about that, but I was able to continue shooting...it never made the gun so dirty it would start having function issues inside of 100 rounds. If you go over 100, your are going to have to at...
  11. M

    OBR 7.62 and non-Larue Suppressors

    They do work well without any changes. I ran the mini on the 260 and the RC on the 308 OBR.
  12. M

    OBR 7.62 and non-Larue Suppressors

    What spring are you using? Just a heads up. You can not use the spring in the gun with the heavy buffer. Is this the buffer you purchased? Did you purchase the spring listed with the buffer? If not you will have additional issues.
  13. M

    OBR 7.62 and non-Larue Suppressors

  14. M

    OBR 7.62 and non-Larue Suppressors

    https://silencerco.com/shop/bravo-anchor-brake/ https://silencerco.com/shop/bravo-front-cap/ Get either and select the 458 end cap?
  15. M

    OBR 7.62 and non-Larue Suppressors

    I can't imagine it has more back pressure than a tbac Dominus? Isn't there a backpressure chart some place. The ultra 9 has more back pressure than the Omega, so I am betting the spring and buffer, using the LaRue suppressed setting should be fine.
  16. M

    OBR 7.62 and non-Larue Suppressors

    The JP SCS won't do the job. Everyone I see that has one has nothing but problems in configurations like this. The springs aren't correct and the weight can't exceed 5ish oz I believe.
  17. M

    OBR 7.62 and non-Larue Suppressors

    This would also help.
  18. M

    OBR 7.62 and non-Larue Suppressors

    This is what in referring to: The ferrule you are describing is steel and it is swaged in with a tool. If you could get the tube changed it would work, but to reduce the gas down to where you function with the tube, it won't run Un-suppressed because you won't have enough gas. If you are on...
  19. M

    OBR 7.62 and non-Larue Suppressors

    Yours might be gassed prior to the larue can coming out? 260 or 308?
  20. M

    OBR 7.62 and non-Larue Suppressors

    Okay for sure use both products from slash. The 308 rifle spring and the 10 oz buffer. Once you start shooting, you can pull weight from the slash buffer if you do not need all the mass. The larue bcg is 20oz, combined your running 30 oz where as I'm running 28.5 oz(tobr shooting 260...
Top Bottom
Back
Home
Forums
Merch
Alerts