• Quick Shot Challenge: What’s the most underrated gear you never leave home without?

    Contest ends Wednesday, join now for the chance to win free Hide merch!

    Join contest

Search results

Search the forum Search Articles
  1. 6MT

    SS / wet tumbling - media preservative

    I don't "store" my pins in the tumbler itself and I wouldn't recommend it either. I rinse them after each use and they end up in a plastic cat litter pan. That's where they dry. They're clean and ready for use immediately.
  2. 6MT

    Single stage press for up to 338LM; Forster Co-Ax vs Harrell Sportsman

    No issues with loading/seating .338LM on my Co-Ax. And I seat them long. I do hold the bullet on the case as I put it into the shell holder though. I does get close to the seating die when installing it into the press. But there's still room below the seating die after the case is in the holder...
  3. 6MT

    Terrapin X.

    Attach some metal to that 'yote!
  4. 6MT

    Terrapin X.

    I would absolutely agree with this. The added feature I like is that it "talks" to my Kestrel. One button push on the Terrapin, and the Kestrel has the range. But the interface is poor, I will agree. Although to be fair, it is a much better performer then the Sig-2k that it replaced.
  5. 6MT

    Throating for Berger Hybrids vs Sierra SMK vs Warner Flatline in .308 Winchester

    I throated my new barrel +.170" for the Juggernaught. At .010" off the lands, it seems the faster I push it, the more accurate it is. I'm up to 2740fps with the 185gr Berger's. And I'll push them a bit further until I just reach the bottom of the bullet in the case with powder. My barrel is...
  6. 6MT

    Berger 185gr Juggernaughts (.308win)

    Just putting it our there...what's the consensus on seating depth for this bullet in a bolt gun. Do they like a jam? Do they like a large jump? Small jump? What are you using as your jump?
  7. 6MT

    Let’s see that reloading bench

  8. 6MT

    155 GR Scenar 308 Varget & IMR 4064

    My 24" Kreiger loved the 155gr Scenar with 47.2gr of Varget. Speeds were 3050fps. Great kilometre plinker. I did step it out to 1200m, but not much after that.
  9. 6MT

    .308 Winchester

    Fair enough. I'll measure the COAL when I get home tonight. I'll post it here. One of the reasons that my CBTO measurement is longer then yours is probably due to the +.170" throat. I also had a great slow node. During barrel break-in I used a 39.0gr charge which showed 1/3moa accuracy...
  10. 6MT

    .308 Winchester

    Yeah, the magazine is useless to load from. This rifle is definitely a single loader. I use the Hornady comparator. I really don't know or care what the COAL is. The important measurement is the CBTO. I know that this load is on the long side. Since I had the chamber throated +.170", there's...
  11. 6MT

    .308 Winchester

    Caliber: .308win Rifle brand: PGWdti Rifle Model: Coyote "2.0" Barrel length and twist: 28" 1:9" Krieger (+.170" free bore) Projectile brand, model and weight: Berger Juggernaught 185gr Powder brand and weight: D4064SSC 44.0gr LOAD CONSIDERED HOT OR CLOSE TO MAX: No pressure signs Primers: CCI...
  12. 6MT

    Precision Rifles.....show em!!

    Just re-barreled my PGWdti Coyote (.308win). The new barrel is a nice Kreiger MTU 17 Heavy Varmint finished at 28" with a very nice Insite Arms Heathen brake. The barrel is a 5R 1:9" twist, throated +.170" to be optimized for the 185gr Berger Juggernaught bullet. Looking forward to load...
  13. 6MT

    178 ELD Match, Varget, 308 Win

    FWIW, here is a similar bullet load for my Coyote. Caliber: .308win Rifle brand: PGWdti Rifle Model: Coyote 1.0 Barrel length and twist: 24" 1:10" Krieger Projectile brand, model and weight: Hornady 178gr ELD-M Powder brand and weight: Varget 43.0gr LOAD CONSIDERED HOT OR CLOSE TO MAX: No...
  14. 6MT

    Precision Rifles.....show em!!

    I call this one, "The European". Sako A7 Roughtech Range in 6.5CM, 1:8" 25" medium heavy barrel, ATRS brake, Zeiss V4 6-24x50, Magpul bipod. Pretty decent for a factory offering.
  15. 6MT

    Maggie’s Dust cropper while walking the dog this morning.

    That is beautiful country!
  16. 6MT

    What’s a good size case for labradar and it’s accessories?

    lol...no. But that laptop case even fits the LabRadar unit with the new aiming device.
  17. 6MT

    What’s a good size case for labradar and it’s accessories?

    Laptop case is perfect for the LabRadar. Mine even fits the base. (Nice fish, huh?) the black bag to the upper right holds the external battery and all of its accessories. The green bag holds the swivel base attachment. Perfect for the LabRadar. And cheap....I didn't tell my wife that I'm using it.
  18. 6MT

    308 ELD-M Load Help

    Here's a load I developed for a shorter (24") barrel. Caliber: .308win Rifle brand: PGWdti Rifle Model: Coyote Barrel length and twist: 24" 1:10" Krieger Projectile brand, model and weight: Hornady 178gr ELD-M Powder brand and weight: Varget 43.0gr LOAD CONSIDERED HOT OR CLOSE TO MAX: No...
  19. 6MT

    PGW Coyote or CADEX R7 in 6.5CM - accuracy

    I have a Coyote in .308win. I am currently having it re-barrelled with a new pipe. It is an extremely accurate rig. That 24" barrel is a weak point IMHO. Mine is the chassis version. Also, the factory brake is a joke. The one in the photo below is not the OEM brake. And that stupid proprietary...
  20. 6MT

    .308win powder choices

    So here in Canada, it sounds like the same shortages are happening as in the States. Varget has been unobtanium now for around a year. There's lots of choices out there. I found 24# of IMR-4064, so I jumped at the chance. You just don't know when more of that (or anything else) will be...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts