Search results
-
Diameter and length of Gen 2 ultras reduced mounting section
New shape on the Tbac ultras reduced area Looking for these measurements of that section if anyone knows off the top of their head? Thanks in advance- Seandradamus
- Thread
- Replies: 3
- Forum: The Armory
-
Average weight of what most woman PRS guns run
2900 easy with 105s and 2880 with 110s It is a fast barrel compared to others I’ve had I like to run around 2850 with either myself- Seandradamus
- Post #7
- Forum: Bolt Action Rifles
-
Average weight of what most woman PRS guns run
My wife did not enjoy shooting my 28” barreled 20# dasher , she did not complain about the weight as much as the length. I chopped the barrel to 22” and it’s around 17 # scoped now and much easier for her to move around with. It’s in a chassis so I can adjust the weight also- Seandradamus
- Post #5
- Forum: Bolt Action Rifles
-
MDT metal 223 or accurate metal
Accurate is absolutely the best 223 mag I’ve used in 4 different rifles, mdt steel mag didn’t feed well for me and only holds 8 comfortably.- Seandradamus
- Post #2
- Forum: Bolt Action Rifles
-
++Bighorn TL3 Builds++
Anyone have a 308 bolt head they would be willing to part with , I can’t find one ?- Seandradamus
- Post #1,640
- Forum: Bolt Action Rifles
-
-
SOLD Fully loaded MPA matrix in great condition
Seconds- Seandradamus
- Post #6
- Forum: Buy - Sell - Trade
-
-
Issues with case extraction after 3 firing.
Na , you only have conjecture, I asked you plainly if you have had this problem you said “no” now all of sudden you’ve fixed this issue many times by ordering small base dies for all your rifles , maybe you should learn to spec your chambers correctly so you don’t have to squeeze all your brass...- Seandradamus
- Post #49
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
- Seandradamus
- Post #48
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
Better to base your decision on actual experience than on conjecture which is all you have, I have actually had the issue multiple times as have some others , and followed advice from people like you who were guessing how to fix it. I succeeded in fixing my extraction problem by not using brass...- Seandradamus
- Post #44
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
I never said it would not work , I said “it can cause extraction issues that will not be remedied with a small base die.” There is the possibility it could, I personally would bet against it only based on my experience. I’m simply telling the OP to try his new Rem brass first, it is the most...- Seandradamus
- Post #40
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
That’s cool that it worked for you, but it’s pretty well known that brass from another rifle with even minor changes in chamber dimension can cause extraction issues that cannot be remedied with a small base die. So you got a new barrel and sized old brass with a small base and never had a...- Seandradamus
- Post #37
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
If my memory serves me it was originally sizing the .2 line around 2thou , the small base was like 4-5 and the clickers continued and got worse with more firings , they were normal loads too .. 105s in a 26” dasher 2920-2930 Have you ever had this situation in one of your rifles with Norma...- Seandradamus
- Post #32
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
Most likely because of what Jakelly alluded to The brass is already too large to start with and or the chamber too small to start with. The brass and it’s inherent spring back will not allow the proper expansion/contraction even if you have a smaller die. I thought I could fix it with a new...- Seandradamus
- Post #30
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
Switching brass would be the quickest , cheapest and easiest thing to try , probably won’t hurt if the smith opens the back of the chamber a bit , Ive tried that too and unfortunately it didn’t solve my issue. Let us know when you get it figured out- Seandradamus
- Post #28
- Forum: Reloading Depot
-
Issues with case extraction after 3 firing.
Smaller die won’t fix it 99% of the time Try your RP brass and see if it happens with those too, bet it won’t- Seandradamus
- Post #26
- Forum: Reloading Depot
-
.25 Cal 135 Hybrid In 25 Creedmoor
I’m running 41 of RL16 , 450s , 15 off at 2800 In my creed ,24” barrel 40 rds fired , I just loaded those to break in the barrel until it speeds up. My 25 dasher was what needed 90 off to shoot , good news is the AB Doppler confirmed .334 G7 and .7 bc variation so a great bullet if you can...- Seandradamus
- Post #10
- Forum: Reloading Depot
-
SOLD AICS 10rd mags- trades added
Are these all gone I’m in need of 1 with a binder plate- Seandradamus
- Post #5
- Forum: Buy - Sell - Trade
-
.25 Cal 135 Hybrid In 25 Creedmoor
I had to jump them .09 before they would shoot and about 50 FPS slower than the blackjacks- Seandradamus
- Post #8
- Forum: Reloading Depot
