Search results

Search the forum Search Articles
  1. S

    Not enough chamfer on my case mouths?

    Instead of hacking away at the case mouth with all manner of cutting tools use a Lyman "M" die in the proper caliber. That will improve with neck tension consistency and will not let case mouth scratch the bullets anymore. Best 20 bucks you'll ever spend
  2. S

    Gunsmithing REM 700 bolt face ruined?

    There is nothing wrong with that bolt. And the "chunk" out of the lug is just the notch for the anti bind rail inside the receiver.
  3. S

    Sidearms & Scatterguns Les Baer 1911 with 1.5 guarantee Problem

    Nooooooo shit!!!!!!!
  4. S

    Gunsmithing KMW loggerhead on a HS Precision by Stockdoc

    thanks Mark. I really appreciare that
  5. S

    Frustrated looking for stock

    Thats why you dont get a savage!! :-)
  6. S

    Gunsmithing KMW loggerhead on a HS Precision by Stockdoc

    Bubb- answered via pm
  7. S

    FN SPR am I expecting to much ?

    I would measure the throat and see how far the bullets have to jump to get to rifling, then adjust the seating depth to bring the ogive of the bullet closer (without affecting feeding) to the leade. Adjust up and down until you hit a node the rifle likes. Good luck!
  8. S

    308 dies

    Can't go wrong with Redding or forester dies. Great consistency/ accuracy
  9. S

    Gunsmithing Does rechambering/setting back a barrel give it full life again?

    Waste of time/money. Just rebarrel and be happy
  10. S

    Gunsmithing KMW loggerhead on a HS Precision by Stockdoc

    Typically a week to a week and a half.
  11. S

    Gunsmithing tikka 308 wont shoot 155 smk ?

    Probably wrong twist for that bullet
  12. S

    McMillan adjustable cheek rests

    Dropinglead, yours is coming along nicely. I should be shipping back by the end of this week!
  13. S

    RUST!!!!!!!!!!!!!!! removal?

    Remove with 000 steel wool and break free. Then treat with eezox oil on the outside surface. Shouldn't have any more problems after that
  14. S

    Gas gun reloading

    Most gas guns have a floating firing pin that kisses the primer when a round is chambered. The cci primer has a thicker cup to alleviate this issue. Fed primers have a very sensitive cup that has been known to cause slam fires during chambering. Many years ago I had a couple slam fires with fed...
  15. S

    I've been had! A tip of the hat to OGonzalez13!

    Freaking hilarious dude!!!
  16. S

    Remington 783.

    Cheap garbage. Stay away!!!!!
  17. S

    Gunsmithing Remington 700 stiff bolt

    You have a burr on the end of the firing pin spring so when you go to open the bolt this burr catches the inside of the firing pin tunnel. Take the spring off the firing pin and grind down the sharp edges on the very ends of the spring. That should cure your problem
  18. S

    Gunsmithing Release Agent for bedding

    After trying all the home grown crap out there I gave brownells acra release aerosol a try. Won't use anything else ever again. Best results ever!
  19. S

    280 AI die set help. Custom dies or redding type s

    Try ch4d. They should be able to help
  20. S

    Gunsmithing Any ideas on how to bend the lips on a TRG42 mag?

    +1 on the h-s tool. You can get it through brownells
Top Bottom
Back
Home
Forums
Merch
Alerts