Search results

Search the forum Search Articles
  1. bcrich

    Savage 110 fcp .338

    Re: Savage 110 fcp .338 I haven't fired any factory rounds just my home rolled but it sounds like it was just a primer issue but you are gonna have to try different ammo to rule out a gun or firing pin problem. Do you reload? I use fed 215m primers. Good luck hope you get it figured out!
  2. bcrich

    First shooting with the Savage 110 FCP in 338 LM

    Re: First shooting with the Savage 110 FCP in 338 LM Ive been using forster benchrest dies and 89.5g of h1000 with 300g smks and havent stuck a case, never have tried retumbo but 96g sounds like a hot load but no pressure signs huh? Doesnt sound like a sizing problem unless they are hard to...
  3. bcrich

    Hornady concentricity tool question

    Re: Hornady concentricity tool question Glad you asked this question, I still get occasional flyers from time to time after run out has been corrected now I need to document each case to see if that flyer was from a case with alot of runout correction and affecting the tension.
  4. bcrich

    Any reason to be concerned?

    Re: Any reason to be concerned? I would worry about getting the tumbling media stuck in the primers more than the humidity factor, make sure to clear any media before you load them up.
  5. bcrich

    338 110 BA bases

    Re: 338 110 BA bases I had EGW make me a 30moa HD base and also had to open up the holes for 8-40 screws.
  6. bcrich

    175 mill spec 308 bullets

    Re: 175 mill spec 308 bullets <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oneteam</div><div class="ubbcode-body">When you say milspec what do you mean? I have boxes of 175 gr M118 match grade bullets, and they are as accurate as SMK's. So what is milspec...
  7. bcrich

    175 mill spec 308 bullets

    Re: 175 mill spec 308 bullets <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BCP</div><div class="ubbcode-body">If you're talking the cheap 175 bullets from wideners they have lots of bad reviews on the net. </div></div> That's the first thing I thought of, I...
  8. bcrich

    Rifle Scopes THUMBS UP - VORTEX

    Re: THUMBS UP - VORTEX Gotta give them props (Scott) for getting my Razor back to me in a week fixing the parallax problem I ran into. Hope I dont have to send it back anymore. Thank Scott and Vortex
  9. bcrich

    new Berger 338 cal 250 gr Hybrid - testers needed

    Re: new Berger 338 cal 250 gr Hybrid - testers needed I tested these at the 600meter line and my Vortex Razor had issues with parallax not adjusting so I cant give an accurate report on these bullets....however I loaded them to 3.690 oal using H1000 and fed 215m with lapua cases for my sav...
  10. bcrich

    .338 lapua Magnum primers

    Re: .338 lapua Magnum primers 215m, only because tula magnums were giving me hang fires but now its all good.
  11. bcrich

    Rifle Scopes loose vortex viper pst turret?

    Re: loose vortex viper pst turret? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: uncledog57</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shoot4fun</div><div class="ubbcode-body">Did you call Vortex...
  12. bcrich

    Rifle Scopes Vortex Razor

    Re: Vortex Razor Thank you Scott, when I heard your message I think I was the happiest sob ever! Glad you found the problem and cant wait to get back in the saddle with that 338LM. Your service is just like everybody has said.....best in the business.
  13. bcrich

    Engraving a serial number to my brass...

    Re: Engraving a serial number to my brass... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EROCO</div><div class="ubbcode-body"> So far Ive been called a douche, pissin in the wind, OCD.. </div></div> Well atleast you can win 1k yd matches and get some smoking...
  14. bcrich

    Engraving a serial number to my brass...

    Re: Engraving a serial number to my brass... EROCO, what's up bro? When I went to Matt T's pad to do some precision loading for my .50 he had me do exactly what you are talking about.....using an electic etching dremel or some similar tool and engraved #'s next to the headstamp, it does work...
  15. bcrich

    .308, 05.56 common powder for both?

    Re: .308, 05.56 common powder for both? Varget, IMR 4895, WIN 748,BLC2, Tac.......the list goes on but those are my fav in order.
  16. bcrich

    Rifle Scopes Exactly What Problems Are There w/ USO Scopes?

    Re: Exactly What Problems Are There w/ USO Scopes? I have the ST22 on my .50 and haven't had any problems (yet)but glad they are local incase I have to return it for repairs and would get another one if I had the $$.
  17. bcrich

    Rifle Scopes Vortex Razor

    Re: Vortex Razor <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BigJohn141</div><div class="ubbcode-body">You are adjusting parallax, not actually focusing the target. In most cases your target will not be in perfect focus when the parallax is gone. </div></div>...
  18. bcrich

    Rifle Scopes Vortex Razor

    Re: Vortex Razor Hope they are quick to get my scope fixed, My Razor's parallax just wont adjust! it will focus fine but the crosshairs will move from side to side when moving my eye around.
  19. bcrich

    Semi-Auto .308 loose primer pockets

    Re: Semi-Auto .308 loose primer pockets Your load sounds like it is good for a bolt gun and way to high for the gas gun if you are blowing primers, I load my Dpms with 40.5g Imr 4895 and even that seems hot in my chamber using lc cases with 168 amax. I havent blown a primer but they are...
  20. bcrich

    Lapua case life ???

    Re: Lapua case life ??? My homie gave me 450 lapua cases but you guessed it....fired multiple times times but they still got usable life. Make sure they arent about to seperate from stretching.
Top Bottom
Back
Home
Forums
Merch
Alerts