Search results

Search the forum Search Articles
  1. DRAM40A1

    WTB 6mm Creedmoor FL Die set

    Forster micrometer seater, $70 shipped. USPS Money Order.
  2. DRAM40A1

    Want to buy Norma 300 win mag brass

    When I said I have 100 fired from Black Hills I mean from when Black Hills was loaded in Norma brass....
  3. DRAM40A1

    Want to buy Norma 300 win mag brass

    I have 100 fired from factory Black Hills ammo. Not sure what it would go for?
  4. DRAM40A1

    WTB Superlative Arms gas block

    I have a stainless .936 for $75 shipped. Send me an email if you’d like a photo. USPS Money Order preferred.
  5. DRAM40A1

    Wanted Lapua 300 Winchester Magnum Brass

    Just an FYI. I’m not so sure Norma made Lapua 300 WM. The Norma weighs 215 grains and the Lapua weighs 260 grains. I would assume they would be similar in weight if it were manufactured by the same vendor???
  6. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    Also your rear screw of the block is in line with the gas port. Just an FYI.
  7. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    My .750 SA is very near .260 to the center. If you secure it .025 forward of the shoulder, it will line up.
  8. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    That’s what I’m seeing as well.
  9. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    I bought another recently and had to call them because of an issue with ordering from the link. They may have fixed it by now but fair warning, it goes out of stock often.
  10. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    I don’t know how to share a link from my phone but this is a deal. $55 Both KAC and LMT use the extended length tube and standard carbine length buffers. BTW, I have a BA 16” mid gas barrel and it runs great with this combo. Edit to add I’m using a standard gas block.
  11. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    You want the extended length tube with a 5.4 ounce H3 buffer. Armalite sells a kit with the tube, buffer, spring for $55. I think it will cure your issues.
  12. DRAM40A1

    AR10 (.308) Home Build Problem Child - Won’t Cycle

    Yes, check that you are actually fully open. 4.5 turns out from fully closed. Also from what I read, the orange spring is for severely overgassed rifle. Use the red spring. In fact, the best thing is to run an extended length receiver extension, 3/4 longer than carbine, with an H3 buffer and...
  13. DRAM40A1

    AR10 with 6.5 Upper showing signs of overpressure

    As others have stated, you need an adjustable gas block on the 6.5 Creedmoor. Along with a high pressure bolt and likely a heavier buffer. BTW, what buffer system are you using?
  14. DRAM40A1

    Starting a new AR10 build

    I saw that one, it was like 50% off and I’ve been tempted as well!
  15. DRAM40A1

    Starting a new AR10 build

    Nice foundation, caliber?
  16. DRAM40A1

    Going to be a good Saturday going all out MK12

    I had the same issue with an Aero gas blocks few days ago. I used a dremel with a cut off disc and trimmed them down flush with the block.
  17. DRAM40A1

    12.5” AR-10 .308 SBR Thoughts?

    I have not. Sounds interesting. I’ll check it out.
  18. DRAM40A1

    12.5” AR-10 .308 SBR Thoughts?

    The split portion wrapped with a strap. A rifle stock is much better.
  19. DRAM40A1

    LMT vs LWRC vs KAC for AR10

    I ran across a decent deal on the SR-25 PC upper and ordered an LMT MARS-H lower from LMT. Dropped in a Geissele SSA-E, added the MAMS and boom....LMT SR-25 PC.
  20. DRAM40A1

    12.5” AR-10 .308 SBR Thoughts?

    I built this one as a pistol. Loud, heavy and not much fun? ? Do it...! This one is built with a Bartlein from Craddock Precision. I may SBR in the future because the arm brace sucks!
Top Bottom
Back
Home
Forums
Merch
Alerts