Search results

Search the forum Search Articles
  1. ta6ppc

    Bergara B-14R Range Report and Assessment

    Some of the greatest BR actions such as Stolle panda, or the teddy have a bushing or a sleeve where the barrel screws in.. if it’s done right like Mr Bush is saying it can be straight and true. I know that Mr Penrod is one of the best rimfire smiths in the country and I am sure that he has his...
  2. ta6ppc

    Bergara B14R Range Day

    curious which barrel you selected? I been kicking around sending mine to Joe Chacon and get him to do a shilen ratchet with one of his tuners.. but I gotta convince my wife to spend that much!
  3. ta6ppc

    Newbie Scope Selection

    I run a 40 moa base, and I chose a NX8 4-32 F1 mil c retical for my Vudoo and for your budget I don’t see how you can beat it with any other scope out there. I also have a B14r that I set up for my wife/ kids to maybe go shoot some local club matches with and I also used a 40 moa rail and the...
  4. ta6ppc

    Triggers?

    I’m also a Jewell trigger fan, I have tried the trigger techs, and the timney Calvin elite.. I prefer the feel of a Jewell. I bought a Jewell for the B14r I have and have ran around 500 rounds through the gun since the install with no issues, no failures of any kind, I also have it turned down...
  5. ta6ppc

    Trigger for Bergara b14r

    I did the Jewell, got it adjusted down the the advertised weight and I haven’t had any issues in a 1,000 rounds so far. It’s only $225 as well
  6. ta6ppc

    Gentlemen, I need your help-I'm now going blind trying to decide on a scope for a Bergara B14 R

    So I bought a EGW 40 moa rail I believe well under $70 and a crimson trace 6-24x scope at bass pro with the rebate it was under $500 out of pocket.. I also got a set of vortex 34 mm precision matched rings so all in total I’m prolly about $750.. I love this scope it’s made in Japan but it’s...
  7. ta6ppc

    Bergara B14R magazines

    I got an email a day or two ago, from BPIGuns.com I signed up on their notify me of when they were in stock.. they had them but were more than what I paid from grabagun.. just signup for the notification and you’ll snag some sooner or later. They are hard to find for sure..
  8. ta6ppc

    Bergara B-14R Range Report and Assessment

    My Vudoo is typically capable of bettering anything the Begara shoots by .150-.200, so my point of the statement is that the Begara is very close to the Vudoo that’s it no hidden meaning or anything.. I shot 2 brands and 3 flavors that day and the average aggregate for all groups was .200...
  9. ta6ppc

    Bergara B-14R Range Report and Assessment

    I use the bore guide that I bought with my Vudoo, however one for a remmy 700 works good too I have a Sinclair that works well. Solvent wise I have been using Bore tech rim fire blend.. when I got the rifle new I ran a few wet patches through it and a few dry ones and I also ran some isso paste...
  10. ta6ppc

    Bergara B-14R Range Report and Assessment

    So I took my 2 rifles out the B14r and the Vudoo so far on my B14r I have bed the action in devcon steel putty, mostly just a skim bed around the rear tang and the recoil lug nothing in front of the recoil lug so my barrel is fully and cleanly floating in mid air with approximately 0.100-.125...
  11. ta6ppc

    Advice on longer ranges 250 yards +

    Which direction was the wind blowing, I shor some with a straight on head wind that was fairly steady 12-15mph and I couldn’t Hit a 3’ square piece of steel at about 250-300.. wind was messing with me bad took 10 shots to get a hit and doing the same hold for the conditions and it would do...
  12. ta6ppc

    Bergara B-14R Range Report and Assessment

    Has anyone tightened up the head space on one of these yet? mine shoots well enough I don’t think I would or could gain anything from it.
  13. ta6ppc

    22LR twist rate

    I shoot at a public range sometimes and they won’t allow 22 Rimfire on the 100 yard line, they say it’s to low velocity and they don’t want a stray bullet bouncing out of their trap.. I hate it because I know damn well I could stack my shots in there sub moa and perhaps even 1/2 moa and I have...
  14. ta6ppc

    Bergara B-14R Range Report and Assessment

    I shot my Vudoo and the B14r side by side off a machine rest and a rear bag on a solid bench. I tested SK pistol match, SK standard plus, and Lapua center x... It all shot very similar, but when I measured them all the Vudoo came out probably.150-.200 better than the B14r.. the bolt lift, and...
  15. ta6ppc

    Bergara B-14R Range Report and Assessment

    I’ve shot lots of groups pre bed, I’m not sure I’ll get a chance to go shoot before I install the trigger.. but I’ll try attached is a pic comparing my Vudoo to the Begara shooting the same ammo
  16. ta6ppc

    Bergara B-14R Range Report and Assessment

    I know KOD has tried a bunch of triggers, I ordered myself a Jewell today.. so hopefully within a week I’ll have some info about it. I’m sure it will function as all jewells do.. I’d like to get into the ounce range on mine. I also bedded my action in Devcon, in the factory HMR stock so...
  17. ta6ppc

    Bergara B14r scope rail

    I ordered the EGW 40moa with the 6-48 screws mounts and works beautifully.. I’m kinda wishing I did the 50moa instead
  18. ta6ppc

    DeLane Development Group Rimfire Ventures

    I have the 40, and I run out around 440-450 of dial with a Nightforce NX8, I have heard that folks with 50 moa bases can still dial 25yards, and I believe that would get you to the big 500.
  19. ta6ppc

    DeLane Development Group Rimfire Ventures

    Yes sir if I ever rebarrel or buy another Vudoo I will not get it threaded it took my groups size down .150” at 50 yards on average
  20. ta6ppc

    Barrel polishing

    I think you would be surprised if you got some isso paste and really scrubbed it with tight fitting patched jag with a good dose of isso on it for 200 or so push and pulls. I clean every rifle I have ever got and then run isso through it like described and it has always made for a easy clean...
Top Bottom
Back
Home
Forums
Merch
Alerts