Search results

Search the forum Search Articles
  1. J

    Recommendation for concentricity gauge

    Re: Recommendation for concentricity gauge <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">I use a Sinclair, I trust what it reads, I bought a Hornady and never trusted it, I could never get any repeatability out of it, so I...
  2. J

    Reloaded .308

    Re: Reloaded .308 It’s actually a bit more complicated since you pretty much have to include the cost of the brass. The flip side is if you buy factory match ammo and they use the brass that you are already using for reloading, you do recoup some of your cost since you inherit that once...
  3. J

    Range Report Newbie To Persision Rifle - Keep Getting Flyers

    Re: Newbie To Persision Rifle - Keep Getting Flyers It could easily be something as simple as your ammunition. Even if you are shooting only FPGMM, the ammunition IMHO is not that perfect that you will not get a flier if you are shooting 5-10 round groups. Most people that get those fliers...
  4. J

    neck turning and it's issues

    Re: neck turning and it's issues Remaction – I know what you have drawn is what is what is normally quoted for the cause of donuts, but after working with neck turning for a while, I am not sure that this is the only reason. The reason I say this is because I turn my neck all the way up to...
  5. J

    Dedicated 22LR uppers

    Re: Dedicated 22LR uppers Great review! Any chance you could go back and give us an idea of the accuracy of these uppers using magnified optics?
  6. J

    Krestrel 4500 NV eating batteries?

    Re: Krestrel 4500 NV eating batteries? It’s been a little over a month now since I changed the battery on 8/15/2011 and I just checked them, the screen says 90% so it appears to be lasting a bit longer….. Remember, I changed the storage rate from 1 per hour to 1 per 6 hours. I am using the...
  7. J

    neck turning and it's issues

    Re: neck turning and it's issues Another one from the AA club – good name for us. I too find that the necks will become uneven again after the initial turn and firing, it just need to be cut down a very little bit ~0.0005” or less on the second turn. I am wondering if this will continue...
  8. J

    5 FTFIRE with reloads for 223, WHY?

    Re: 5 FTFIRE with reloads for 223, WHY? If you are going to pull unfired round this weekend, you can easily check for the existence of high primers – put your finger on the head of the round and swipe it across, you will easily be able to detect high primers which sticks above the case head...
  9. J

    5 FTFIRE with reloads for 223, WHY?

    Re: 5 FTFIRE with reloads for 223, WHY? This usually happen when you did not seat the primers in properly i.e. high primers. What happens is when the firing pin goes forward, it hits the primer but some of that force is used to push the primer in, the other problem is if the primer is not...
  10. J

    WTF happened to this muzzle break?

    Re: WTF happened to this muzzle break? Remember, a muzzle break is designed to direct the muzzle blast sideways and backwards so that it’s energy will cancel some of the recoil of the gun. In order to do this when the bullet arrives at the port, it acts as a seal for the muzzle so the...
  11. J

    New products form SW Ammo

    Re: New products form SW Ammo Issue resolved.
  12. J

    New products form SW Ammo

    Re: New products form SW Ammo Issue resolved.
  13. J

    New products form SW Ammo

    Re: New products form SW Ammo Issue resolved.
  14. J

    SWammo Cyber Week Sale!!!

    Re: New code for SWammo Issue resolved
  15. J

    neck thickness

    Re: neck thickness I think there are actually two main type of neck thickness measuring devices. One that is used for brass sorting and culling. It allows you to rotate the case all the way around so that you can measure the difference between the high and low spots. I use a Redding for...
  16. J

    Factory "Match" loads: weighed or metered?

    Re: Factory "Match" loads: weighed or metered? Check their MV range and SDEV and you would believe it.
  17. J

    Krestrel 4500 NV eating batteries?

    Re: Krestrel 4500 NV eating batteries? Actually, this is the second time that my Krestrel has run out of power after 3 months. The first time I thought I had accidentally left it on, but it appears not to be the case. As for turn off the auto store function, I think the manual says that...
  18. J

    RCBS Power Puller

    Re: RCBS Power Puller I would get rid of that and replace it with a Hornady Cam-Lock bullet Puller which is on sale at Midway for only $17.99 which is actually cheaper than the RCBS Pow’r Pull Impact Bullet Puller and works a hundred times better. This thing works so great and is so much...
  19. J

    SW Ammo Gasser Loads

    Re: SW Ammo Gasser Loads <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MikeSWammo</div><div class="ubbcode-body">2650 is our standard velocity through a 24" bolt gun. 20" Gas guns usually run around 2560ish. Also, Sale continues through Friday. 10% off...
  20. J

    Krestrel 4500 NV eating batteries?

    Re: Krestrel 4500 NV eating batteries? Put in new batteries and check the default store rate and this appears to be <span style="text-decoration: underline">1 per hour</span>, changed it to <span style="text-decoration: underline">once per 6 hours </span>to see if it improves. Not sure you...
Top Bottom
Back
Home
Forums
Merch
Alerts