Search results

Search the forum Search Articles
  1. I

    **6 Creedmoor**

    It cheaper by a few bucks per pound, Meters much better and is more consistent for me with some high velocity before I see pressure signs. I never thought the 6mm Creedmoor would run a 105gn bullet at 3380fps but it did during a basic ladder test when I first started using it. My problem is I've...
  2. I

    **6 Creedmoor**

    DA change? I had it change during a shooting session which dropped 6 tenths off at 1k off my normal dope! That's a good bit. Basically dropped it to 6.1mils to 1k vs 6.7mils. I always check the DA befor I head up to shoot a stage. Sent from my SM-N900V using Tapatalk
  3. I

    **6 Creedmoor**

    I think that stuff varies from batch to batch. I had less change in velocity with H100v and my temp swings were not as much as yours. Mine was 15*-95*. About 80fps increase in the summer months with a barrel that was actually bleeding some velocity off with H100v. I just committed to buy a gap10...
  4. I

    Rifle Scopes Recommend lightweight optic for Scar 17

    Talking about the March I had from Joe? Yeah it didn't matter how I had the diopter set there was always that feel of "the target is further away" on 1x. If it was turned up to 1.1 or whatever that went away and when I looked at horizontal lines like the ones in doors, then they all lined up. I...
  5. I

    HardRock Match on 6/28/14

    I got the pm in late but I will be there Friday and Saturday. Sent from my SM-N900V using Tapatalk
  6. I

    precision rifles... show em

    And you will cuss, a whole lot! :) Sent from my SM-N900V using Tapatalk
  7. I

    precision rifles... show em

    Got what about 100 miles there :-) awesome place to shoot. I'm very jealous to say the least! Sent from my SM-N900V using Tapatalk
  8. I

    Planning a build ... 6 CM too good to be true?

    Second one in an XLR chassis.. Same specs listed above with a bartline 1-8 237 vs the 1-7.5 236 brux on the other. The bartline is definitely the slower barrel but has a different bore and I'm running bn coated 105gn hybrids now so basically add 2 full grains to get to same velocity as the...
  9. I

    Planning a build ... 6 CM too good to be true?

    What are you shooting bullet wise? I just got done with load development on the 4th 6mm Creedmoor (my second) other than the brass quality I love the thing. The wife has probably just taken over this one since it's in a carbon XLR chassis so it's adjusted to her and a little lighter than mine in...
  10. I

    precision rifles... show em

    James and Melissa Gilliland is who you are talking about. I've shot with them a good bit and they are good people. I honestly don't know the reamer specs. I told Mark at Accurate Ordnance to make it happen so they ordered it and will be doing all the work. I trust them to do what's best. The...
  11. I

    Rifle Scopes S&B 5-20x50 PM II Ultra Short / first-hand experience anyone?

    I need to consolidate some optics so everything is the same. I wonder if euro optics will give a discount if I buy two at the same time. Sent from my SM-N900V using Tapatalk
  12. I

    Rifle Scopes S&B 5-20x50 PM II Ultra Short / first-hand experience anyone?

    No doubt. I would almost order two of them if they were at that price point. With them at 4600 I'd just assume buy the larger ones like I already own for less than 3k. Sent from my SM-N900V using Tapatalk
  13. I

    precision rifles... show em

    This is my second one. The first one was ran at 3150fps using h4350 or h100v. About 41.8-42.6 depending on the powder with cci 250 Magnum primers. I'm using cci Br2s now and bn coated bullets so a few things have changed on the second one.. Sent from my SM-N900V using Tapatalk
  14. I

    precision rifles... show em

    No its Logan Martin lake in Talladega/Pell city area of Alabama. The barreled action is Barrett bronze which I really like but doesn't go so well with the carbon XLR. I've had a few in this color and they look great in the manners black forest pattern which I don't have a picture of on this...
  15. I

    precision rifles... show em

    Another great Accurate Ordnance built 6mm Creedmoor. 24" 1-8 .237 Bartline barrel with APA little bastard brake blended in. TAC30 action with 20moa stiller base. Timney 510 with some work to get it to 1lb 0.8oz Carbon XLR chassis Steiner 5-25x56 MSR reticle mounted in a 20moa bobro...
  16. I

    Rifle Scopes S&B 5-20x50 PM II Ultra Short / first-hand experience anyone?

    And with the single turn turrets and 17mils that takes me to 1639 yards with my 6mm Creedmoor and probably a little further for the 6mm slr once I get it. I'd say for what we do it would be a great option IF it were priced a little lower (3200-3600 depending on reticle) Sent from my SM-N900V...
  17. I

    Rifle Scopes S&B 5-20x50 PM II Ultra Short / first-hand experience anyone?

    Right now I'm having to pinch penny's but I'll probably get one on the way in a few months. I wonder if the glass is similar to the other 20x optic which to me is better than my 5-25x56 for some reason. With it also being a newer optic maybe the quality of their newish 7k dollar 27x model which...
  18. I

    Rifle Scopes S&B 5-20x50 PM II Ultra Short / first-hand experience anyone?

    David I've been thinking about picking one up for a few reasons but 4600 is hard to swallow for sure. They are tiny though and I personally like the single rev elevation turret and capped windage turrets. As far as elevation it's enough to take me a long long way with my 6mm Creedmoor so...
  19. I

    **6 Creedmoor**

    Honestly I'd probably place roughly the same if it were my guess. I'm not that great of a shooter so honestly that barrel that would only shot a best of 3.5" at 100 the day before the match at K&M may have helped me.. Do I think it did? Hell no but there is always a possibility I suppose :-)...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts