Search results

Search the forum Search Articles
  1. I

    6mm creedmoor loads?

    My new brass feels much better than the last batch so hopefully it will remain nice and tight. I'm going to keep reloading 20 of them each go around to see how long I can go without annealing or the primer pockets going to junk. Sent from my SM-N900V using Tapatalk
  2. I

    **6 Creedmoor**

    http://ammunitionstore.com/products/small-pistol-standard-primers-wolf-performance-5000-pc-box.html Sent from my SM-N900V using Tapatalk
  3. I

    **6 Creedmoor**

    Go to gunbot.com for the primers. I just ordered 5k wolf primers but can't remember where I ordered from. Sent from my SM-N900V using Tapatalk
  4. I

    **6 Creedmoor**

    Yes it will speed up. My brux barrels sped up about 80 fps or so, bartlien around 60fps so far and picking up a little each time out. It should settle down after 150 rounds or so. I would find a load around 3075fps if possible and see if it stays accurate, All of mine have. Sent from my...
  5. I

    6mm creedmoor loads?

    Br2s work good until. Primer pockets loosen up then you will want the wolf or tula primers.. I see an average of about 8fps variance between the br2s and the wolf primers with wold being a little faster and more consistent. The last shot in this group was a br2 which got mixed in with the wolf...
  6. I

    My XLR chassis improvement

    Yep. Need to get it on a mill though. I want it to look good. Sent from my SM-N900V using Tapatalk
  7. I

    **6 Creedmoor**

    Take the expander ball off. Why would you want to undo what you just did with the bushing? :-) Sent from my SM-N900V using Tapatalk
  8. I

    My XLR chassis improvement

    Exactly what I was thinking about after cussing my mags yesterday during a drill. Its with every bottom metal with two exceptions that Ive ever owned. One was a Surgeon and one was a PTG that I owned for about 2 days. Both of those do not fit flush with the stock (manners at that time). I have...
  9. I

    "new post quote" notification

    If I recall he said he tried to make the change to actually being you to the new post but it didn't work. On tapatalk it works (I think) , just not from a normal browser. Sent from my SM-N900V using Tapatalk
  10. I

    6mm creedmoor loads?

    When I had my gap10 I shot bn coated 105gn hybrids at 2.7550 which were pointed so it took a little more powder but 41.8 is what i ran and was very accurate. Velocity was around 3050fps Sent from my SM-N900V using Tapatalk
  11. I

    Rifle Scopes 2014's Best Scope ShootOut

    One reason why I use what is proven and have a spare in the truck if needed! Sent from my SM-N900V using Tapatalk
  12. I

    Rifle Scopes 2014's Best Scope ShootOut

    I would be interested in seeing the March 5-40x56 tested. Imo it's not much heavier than the little brother, still ffp, same reticle, same turrets but imo a phenomenal optic. I've done the same test by locking it down and testing the tracking and it was dead nuts on for the range I would...
  13. I

    Hornady 6mm creedmoor brass

    I never got around to trying the 22-250 brass. I did try the nosler brass which was much better but it's expensive as hell at 60 bucks per 50 pieces. Sent from my SM-N900V using Tapatalk
  14. I

    Hornady 6mm creedmoor brass

    I'll say if you don't have an adjustable gas block on the gap10 it will kill it quick. Even then the semi is rough on it. All of my brass I had during the short time I owned a gap10 in 6mm Creedmoor was spent to begin with so I don't know how hard it would be on new stuff but basically one shot...
  15. I

    What would you like to see in a match?

    Oh and allow electronic sights for all pistol portions in matches :-) sorry had to throw that in there :-) Sent from my SM-N900V using Tapatalk
  16. I

    What would you like to see in a match?

    I agree on the entry fees for some of the matches that don't have larger prize tables even though in a lot of the cases the match fee is the cheapest part of the equation. Honestly I just want to shoot some more smaller one day matches more often :-) Sent from my SM-N900V using Tapatalk
  17. I

    Hornady 6mm creedmoor brass

    It's not the necks that were the problem. It's the primer pockets. About 10 per 100 were out of spec to begin with but sounds like it may have been fixed. If so I've had no other issues with the brass. Sent from my SM-N900V using Tapatalk
  18. I

    Hornady 6mm creedmoor brass

    I'll weigh it next time I'm up in my reloading room. I'm assuming it is a little thicker so I'd assume it also weighs a little more as well. Sent from my SM-N900V using Tapatalk
  19. I

    Hornady 6mm creedmoor brass

    velocity with the same powder charge as the hornady brass. I dont know what the capacity difference is between the two however..
  20. I

    Long Range Semi-Auto Decision (GAP-10 or JP-LRP)

    Not dogging GAP but the GAP10 I owned was plagued with nothing but problems when I got it. Gap was of ZERO assistance over 10+ days of me calling and I only got one call back with whomever I spoke to saying "ive never heard of that happening" when its listed on here multiple times.. I picked up...
Top Bottom
Back
Home
Forums
Merch
Alerts