Search results

Search the forum Search Articles
  1. svxwilson

    AADMOUNT was loose, figured it out

    Its a Warne 56mm mount. Threw the Razor G2 4.5-27x I had purchased for it but just had not bother to put it on yet.
  2. svxwilson

    AADMOUNT was loose, figured it out

    Figured it out, feeling stupid for the way I packed.... One of the rails must have got damaged slighly on the upper. I can't see any damage but it has to be there. One rail forward and one backward from the original position Aadmount and PST scope would lock up like it's intended, but in the...
  3. svxwilson

    AADMOUNT was loose, figured it out

    @R.O.U.S. It has always been on the same JP rifle since I purchased it, that combo has consistently produced sub-moa results every time I have shot it before yesterday. I will reach out to Aadland if I don't get anybody who has experienced this same problem.
  4. svxwilson

    AADMOUNT was loose, figured it out

    @lash the scope can move vertical and horizontally, it looks like the mount is also moving with it and the scope is not moving by itself inside the rings. All the screws are tighten to spec with my FAT wrench (double checked today) and I also checked it at the range yesterday by hand with a...
  5. svxwilson

    AADMOUNT was loose, figured it out

    Hello Everyone! The other day I transported all my gear in the bed of my truck. I am assuming something got rattled loose. When we went to shoot my JP PSC-12 that has the AADMOUNT 1 piece scope mount and a Vortex PST 6-24 attached I couldn't hit a damn thing. Which is extremely uncharacteristic...
  6. svxwilson

    JPs new Semi-monolithic Small Frame SCI-20

    Being a JP fanboy I read the bulletin every month it when it comes to my email. Last month they released their new ambi lower. But in the very beginning of the bulletin they made a typo. They mentioned a new Semi-monolithic upper, but had no details on it later in the bulletin. So being the...
  7. svxwilson

    LMT MARS lower and JP PSC-12 Knights/Armalight Upper Fitment

    I had asked them the same question a few years ago and they didn't have an absolute confirmation, but got it should work but not guaranteed. Sounds like they test fit one since then. Thats awesome, thanks for the reply.
  8. svxwilson

    LMT MARS lower and JP PSC-12 Knights/Armalight Upper Fitment

    I am curious if any of you have tried the fitment of a LMT MWS MARS Lower with a SR25/Knights JP PSC-12 upper? This is the JP upper I'm talking about. https://www.jprifles.com/buy.php?item=JPPSC12-URA
  9. svxwilson

    Will jp lrp fit a mars lower?

    Buy once cry once. I have several JP rifles, some with a bunch of JP parts, one complete factory rifle. All are the best shooting most accurate rifles I have. Also JP parts and complete builds hold their value over time.
  10. svxwilson

    Will jp lrp fit a mars lower?

    Also the JP LRP-07 lower is different than a regular DPMS pattern, it will only fit a LRP-07 upper because it doesnt have a rear charging handle. https://www.jprifles.com/buy.php?item=JPPSC12-URA That upper from JP should work on a SR-25 like your LMT lower.
  11. svxwilson

    AR10 not accurate - what to try next?

    This is what I would suggest trying next. Shims are cheap ($20ish) and loctite 609 or 620 is even lesser expensive and a good adj gas block can be found for around $100. How familiar are you with shooting large frame ARs? Definitely requires really good technique to get good results as others...
  12. svxwilson

    Semi-Auto 6.5 CM w/ $6K Budget

    You can get the barrel out 2 ways with a thermofit receiver. Either super heat the receiver around the extension or get a 1" wooden dowel and use that to hammer it out. You could probably use a combo of both if need. The LRP-07 upper requires a shim to thermofit, the new LRI-20 upper which only...
  13. svxwilson

    Semi-Auto 6.5 CM w/ $6K Budget

    Get the new JP LRI20/LRP-07 upper lower combo, you get all the features of the LRP-07 but with JPs newest large frame upper. Look it up, JP will never disappoint.
  14. svxwilson

    Accuracy and Upper Receivers.

    Are the Wilson Combat Billet uppers thermofit receivers? Update, Called Wilson to get the answer, they are NOT thermofit.
  15. svxwilson

    Gunsmithing Is this 308 receiver to barrel fit too loose? Are my tolerances normal?

    Buy some stainless steel shim stock and thermofit the barrel to the receiver. You wrap the barrel extension with a custom shim you make, super heat the receiver in an oven or with a heat gun, getting it to expand to a dimension slighly larger than originally. Then slide the barrel in while the...
  16. svxwilson

    Optics SOLD! PRICE DROP! Larue LT 120 34MM Quick Release

    SOLD!
  17. svxwilson

    Optics SOLD! PRICE DROP! Larue LT 120 34MM Quick Release

    TTT
  18. svxwilson

    Optics WTB: 34mm low rings

    I have a larue LT120 for sale on here. Hit me up if your interested.
  19. svxwilson

    Optics SOLD! PRICE DROP! Larue LT 120 34MM Quick Release

    TTT
  20. svxwilson

    Accessories WTT/WTS Final Price drop and a Donation Gas Block! Magpul MOE handguard and 22LR K

    TTT
Top Bottom
Back
Home
Forums
Merch
Alerts