Search results

Search the forum Search Articles
  1. sobrbiker883

    Rifle Scopes Using a .223 BDC reticle on a .308?

    Thanks-you expressed my sentiment much clearer than I had the patience to after working a 14hr day of storm response while typing on my phone. Subtensions are subtensions. Back when the biggest reticle arguments were “are oval dots better than round dots”, and no one had matching turrets...
  2. sobrbiker883

    Rifle Scopes Using a .223 BDC reticle on a .308?

    RTH- Different tools, different jobs. I’ve put more than a couple barrel’s worth of rounds on steel across the country under match conditions through my beloved USO mil-MPR, and I’ve put a couple animals or two down utilizing BDC reticles. I just disagree with your disdain for them, and your...
  3. sobrbiker883

    WTT/WTS 140 &123gr A-Max

    PM’d
  4. sobrbiker883

    Rifle Scopes Using a .223 BDC reticle on a .308?

    My 16” 308 shooting 165BTSP’s at 2625 matches my US Optics 1-8’s RWF-77 reticle which was designed for 77gr SMK’s by a 3-gunner our to 600. I’ve got a Nikon BDC on my Savage 6.5CM that matches old 140 Amax’s at 2750 as well. Tell an old 8541 that BDC’s don’t work in different conditions-that’s...
  5. sobrbiker883

    WTB US Optics SN-3 3.8-22x58 ERGO, EREK, Mil/Mil

    I’m sure there are some out there, but- I can’t even think what it’d take for me to let go of mine...
  6. sobrbiker883

    Liberty optics? Where did they go?

    Glad to see you still doing what you do Scott!
  7. sobrbiker883

    FOUND

    Found the chassis I was looking for
  8. sobrbiker883

    The Kestrel Killer?

    I see no DA on that screen.
  9. sobrbiker883

    AR15 , slam fire reasons?

    An in-spec AR with trigger pins intact will not impact firing pin by hammer until lockup. Crap in firing pin channel or other reason firing pin would be stuck protruding would be my guess.
  10. sobrbiker883

    Help with a 6.5 Grendel

    If you wanna blast crap at 100-200yds, by all means go cheap, hell get a blackout or SPC and have fun. If you want a sub-moa rifle capable of taking CXP2 game to 700 or so yards (which is really where a Grendel shines) don’t sell yourself short.
  11. sobrbiker883

    Help with a 6.5 Grendel

    I don’t, but lots do. 65G suppressed is arguably Scott’s favorite personal predator build. If Specialized Dynamics’ site isn’t showing just uppers, contact him anyway va the site.
  12. sobrbiker883

    Help with a 6.5 Grendel

    Contact Scott at SDRifles.com He build a great Grendel upper, and stands behind his builds. I’ve actually witnessed arguably the best gunsmith in the business (runs a little place in KC;)) pick one of Scott’s uppers off a prize table happily.
  13. sobrbiker883

    Pulled

    Pulled, going different direction
  14. sobrbiker883

    Pulled

    someone looking to get into glass like this has to have a good hunting rig lounging in the safe!
  15. sobrbiker883

    Pulled

    Pulled
  16. sobrbiker883

    Pulled

    Pulled
  17. sobrbiker883

    Pulled

    Going different direction
  18. sobrbiker883

    .260 or 6.5 Creed....Vote AR 10 build

    And if the answers is “I’m building it myself”, chances are you’ll be learning a whole bunch about the timing of gas guns, the amount of bullshit advice that lives online, and ending up with a rifle that is setup with a few different parts than you started with. Buy whatever floats your boat...
  19. sobrbiker883

    .260 or 6.5 Creed....Vote AR 10 build

    I’d go with what the guy building my rifle or barrel recommended.
  20. sobrbiker883

    Sidearms & Scatterguns 10mm 1911 thoughts & opinions

    RE:Shooting 40 in a 10 Y’all do understand headspace on rimless cartridges right? If the extractor holds the rim you MAY be good to go, but if they ride forward in mag and feed ahead of extractor what’s to headspace on? Get a 40 barrel and 40 mags, or just load weak ass 10mm rounds. ....or shake...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts