Search results

Search the forum Search Articles
  1. O

    6-284 with 95 gr bullets

    Have been trying for quite a while to get my 6-284 to shoot 105-107 gr. bullets. No luck with countless combos. Rifle is 1:8 so a friend suggested I try some 95 gr. bullets before I take the barrel off. Berger twist calculator says I would be just fine. So, if you have a starter load suggestion...
  2. O

    22 Creedmoor Brass

    I have 100 cases of Copper Creek 22 Creedmoor brass LRP. The necks have been skim turned, otherwise brand new. I use SRP cases and stupidly didn't realize what I had ordered until I had started turning them. I am asking $80 shipped. Prefer Pay Pal but will also do USPS M. O.
  3. O

    22 Creedmoor LRP Brass

    I have a load worked up for my 22 Creedmoor with SRP brass. Would anything wrong happen if I was to use LRP brass with the same load?
  4. O

    22 Creedmoor Whidden dies - current quality control?

    Some guys use a 22-250 seater.
  5. O

    22 Creedmoor Whidden dies - current quality control?

    My seating die is a Forester 6 Creedmoor die . Works great.
  6. O

    Copper Creek brass

    Who makes CC brass? Trying to find a price on their 22 Creedmoor brass.
  7. O

    Range Report 25 cal for comps

    Sure wish 257 Blackjack could answer one of the e-mails I sent.
  8. O

    Questions about neck dies, and custom dies.

    I believe you have to send in at least 3 fired cases. The reason I won't spring for a custom die is because it's only good for that particular barrel. Unless you own the reamer. Why are you neck sizing?
  9. O

    22 creedmoor

    I chose the 1:8 as the best compromise and haven't second guessed at all.
  10. O

    Savage.Is this a good buy starting LR

    I like Savages but, I would be willing to bet the owner didn't pay over $450-$475 for the rifle. Do you feel he has put over $725 worth of options into it? I , personally, don't see the value. Keep looking!
  11. O

    6-284 and 115 gr DTAC's RBT

    Looking for starter loads for the 6-284 and powder. Would like to try the DTAC's as a last resort.
  12. O

    6-284 with 115 gr DTAC's RBT

    Looking for some starter loads and powder for the above bullet in my 1:8, 6-284.
  13. O

    What are you guys using for priming tools?

    I use the RCBS automatic with Hollands option. It is very good with lots of feel. On another forum I saw the Bald Eagle priming tool was available and got one. It is a single primer feed but, that doesn't matter. I have more time then sense! Anyway, the Bald Eagle is a little jewel. However, to...
  14. O

    What are you guys using for priming tools?

    https://www.hollandguns.com/ Click on, "Reloading equipment on the left side of the page.
  15. O

    What are you guys using for priming tools?

    Look at, "Holland's" optional kit for the RCBS priming tool. I use it and it works great and a great help for old fingers that don't like the hand held tools.
  16. O

    Table size?

    Where's there's a will there's a way! However, I have 3 tables and always looking for more room. That size you are looking at would probably be fine if you use it for your charged cases and bullets only.
  17. O

    How are you using your RCBS Chargemaster

    I use bushing dies to size my cases. My CM is about 2' from my press. I can seat bullets anytime the CM is running and not disturb anything. The top of my bench is regular 3/4" plywood. I can't imagine needing the press to cam over to seat a bullet.
  18. O

    22 creedmoor

    Well, I cinched up my load for my 22 Creedmoor today. 80.5 Berger Full Bore 40.0 grs. H-4350 3450 FPS 5 shot group at .415 great minute of coyote. CCI BR SRP Peterson SRP brass 28" finished Pac Nor SSSM 1:8 I worked up to 43.0 grs. of H-4350 to 3590 FPS but, it was a hot load for my rifle. The...
  19. O

    Peterson 6.5 Creedmoor Small Rifle Primer Brass

    I took some out today that I necked down to 22 Creedmoor. I was shooting 80.5 gr Bergers with lots of IMR 4350 in 84 degree weather. I was getting the faintest of ejector marks. Will see how the primer pockets feel like when I load them again.
  20. O

    Velocities decrease with higher charge sometimes...why?

    Maybe you need a hotter primer as you increase the powder load. Just guessing, don't know.
Top Bottom
Back
Home
Forums
Merch
Alerts