Search results

Search the forum Search Articles
  1. John Glidewell

    Trickler / Scale Expectations

    There is nothing wrong with the V4 system if set up properly. The add ons make it faster and more consistent. The main point of my post, being expectations, is to make sure the scale is isolated from vibration and electronic interference. A lot of the problems I see are more to do with the...
  2. John Glidewell

    Trickler / Scale Expectations

    why do you care? not wasting my time explaining it.
  3. John Glidewell

    Trickler / Scale Expectations

    They are working very well. You are correct, they are coarse threads of various pitch for the type powder. We should be finalizing this fairly soon. I am not sure of a timeline for production. MK Machining is very thorough in testing.
  4. John Glidewell

    Trickler / Scale Expectations

    My V4 throws everything from Varget to N570 in 8 to 12 seconds without issue. One thing I have learned about the scale is it needs to be isolated. Clean power if possible, power strip that eliminates electronic interference and do not plug anything else on that strip. Rubber matting under a...
  5. John Glidewell

    Help: 6.5 Creedmoor - 140 Grain ELD-M & Vihtavuori N555 Load Data & Tips

    It is in there, you just missed it. Bullet 9,1 g / 140 gr Hornady, ELD Match C.O.L. 71,1 mm / 2.799 inch Powder Starting load Maximum load Type Weight Velocity Weight Velocity [g] [grs] [m/s] [fps] [g] [grs] [m/s] [fps] N140 2,03 31.3 693...
  6. John Glidewell

    7mm PRC

    Not same cartridge but we run Retumbo in Wife's 7/300 prc. Does much better than N570.
  7. John Glidewell

    6.5 Creedmoor

    upper right hand corner, same place it has always been.
  8. John Glidewell

    Fx120i not turning on, just ticking?

    Bad power supply or broken cable/s. I would check the cables first, they are known to break.
  9. John Glidewell

    25x47 Lapua load data

    ^^^ correct
  10. John Glidewell

    Reloading order of operations

    Anneal Full length size / deprime wet tumble / dry mandrel neck trim on 3 way cutter prime brush and lube neck
  11. John Glidewell

    Questions on 25GT

    I took mine out today for first time. Barrel is 28" Shilen Select Match 7 twist 4 groove on Kauger Arms VPR action bedded in MDT ACC Elite, Alpha OCD brass, BR4 primers, 134 ELDMs at .035 off lands with 36 grains of RL16 for first 100 rounds. First few rounds were 2590ish and it quickly went...
  12. John Glidewell

    6gt

    33.2 of RL 15.5 @ 2830. I can run them faster, but they like low 2800s more.
  13. John Glidewell

    6gt

    I am running 115 DTACs in mine now. I was in same boat trying to find a good replacement. DTACs are doing very well.
  14. John Glidewell

    6gt

    108 elite hunter is a hybrid ogive. I also ran 108 BT and 107 SMK with good success. 107s can be had for less $$.
  15. John Glidewell

    6.5 Creedmoor

    The one on the right has a slight ejector mark over the C, so that is mild pressure sign, I would not go higher. The other signs to pay attention to is stiffer bolt lift or clicking at top of bolt opening.
  16. John Glidewell

    6.5 Creedmoor

    nothing wrong with those, not flat and no cratering, 37 grains is super light load
  17. John Glidewell

    Savage Trigger Options

    +1 for Elf triggers. I run them on my Savage rifles. Big improvement over factory trigger.
  18. John Glidewell

    New Lapua Long Range and Super Long Range (Announced)

    The big difference between Long Range and Super Long Range is performance criteria. The stuff that does not make the velocity and SD criteria gets labeled Long Range. Ran Super Long Range in mine this weekend. 79 recorded shots.
  19. John Glidewell

    RL16 vs H4350 at today's prices... What would you buy?

    No, not in my experience. It is easier on barrels than H4350 and RL16.
  20. John Glidewell

    Question about higher end trickler systems vs Chargemasters

    To be fair, if you include the time for bulk throw to finish it is 9-10 seconds. Still super fast.
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts