Search results

Search the forum Search Articles
  1. John Glidewell

    A&D FX Scale Deal

    Scroll up, asked and answered
  2. John Glidewell

    Sorting Centerfire By Rim Thickness

    Noise. I run a CPS and get plus or minus .001 variation at most. The biggest thing I was able to actually measure was SD. Nothing else changed in my testing. SDs went from around 8-9 to 4-5, everything else was the same. That was a .002 crush on primer and that is where I run everything. I...
  3. John Glidewell

    Autotrickler V3 - Won't Throw

    Did you inspect cables / connectors for cracks? The tines on those cables brake / crack real easy and casue those issues. If it is not cables it is likely the motor. But cables are the most likely issue.
  4. John Glidewell

    Autotrickler V3 - Won't Throw

    Yes
  5. John Glidewell

    Autotrickler V3 - Won't Throw

    Seen it before.
  6. John Glidewell

    Powder IN-STOCK thread

    I just got a bunch too. I am good on everything else but primers have been the most difficult to find at decent prices. Hope they are like the BR4s or 450s.
  7. John Glidewell

    Autotrickler V3 - Won't Throw

    Broken cable
  8. John Glidewell

    6gt

    Bullshit!!!! Been wet tumbling with steel pins for years without issue. 223 rem, 6.5 creed, 6 creed, three 6 gts, 22 gt, 25 gt, 7/300 prc, 6.5 prc, 338 edge, 338 lm. Never an issue.
  9. John Glidewell

    Am I being an idiot - Why am I getting pressure signs here?

    I keep this link handy, good video of what you have explained. https://www.wheeleraccuracy.com/videos
  10. John Glidewell

    22GT load data

    I ran N160 and N555. N160 seems to be a better match for the 22gt. 90smk at .035 off lands. Guessing velocity based on other stuff shot and QL, but Xero did not pick up this string for some reason.
  11. John Glidewell

    6gt

    I use the Hornady spray too. I spray brass in a Tupperware container and mix the brass by hand to help spread it evenly. (let it sit for a few min before running) I wipe the neck and shoulder area before running it in die to keep from getting any hydraulic denting. I have been doing it this...
  12. John Glidewell

    6gt

    Alpha OCD
  13. John Glidewell

    22GT load data

    27"
  14. John Glidewell

    22GT load data

  15. John Glidewell

    6mm BR

    What is your cleaning regime? Suppressed or not?
  16. John Glidewell

    Vihtavuori in a 6 gt

    I am liking N160. 37 gets me 2845 with 115 dtacs. 37 is not compressed.
  17. John Glidewell

    25GT Load Data.

    Anthony does great work. Looks like fun.
  18. John Glidewell

    Headspace inserts : SAC vs Hornady

    I have had the SAC set up for years. I switch out all the time without issue. Like anything it has to be maintained. I clean them and put a little lube on the oring every now and then. As has been stated, both work. I prefer the SAC system. It is easier to use and provides more consistent...
  19. John Glidewell

    Headspace inserts : SAC vs Hornady

    The SAC stuff is more consistent and easier to use. They both work but I like the consistency I see from the SAC comparators.
  20. John Glidewell

    6 GT Load Suggestions & Suppressor Pressure Signs!?

    Curious. How many rounds through suppressor? I still had some issues today, only suppressed. Pulled suppressor, ran with just brake, no issues. Put suppressor back on and issues were back. Took suppressor apart after I got home and it is carbon baked. I can see where some carbon has flaked...
Top Bottom
Back
Home
Forums
Merch
Alerts