Search results

Search the forum Search Articles
  1. M

    Vudoo vs rim x and gun smith.

    Hello all, Going to get a custom 22 for plinking hunting and some matches. I can get a vudoo complete build. Or I can get a rim x action and my smith can install a brux barrel. Basically the vudoo would be 200 bucks cheaper but what do you think is going to be more reliable and accurate...
  2. M

    Precision Rifles.....show em!!

    If you are on a budget keep the current stock and see how it shoots with a new barrel. My savage had a stock that flexed like Walmart Tupperware. If a stock flexes it could cause accuracy issues if it hits different parts of the rifle and barrel sporadically.
  3. M

    Precision Rifles.....show em!!

    I would recommend swapping out the barrel and chassis. I had a savage that was terrible and for 1400 extra bucks I got a one hole gun. To me it was cheaper than struggling to find ammo that would shoot etc. Below Picture is factory ammo, but honestly it shoots everything under 1 moa easy. It...
  4. M

    Seekins SP10 barrel question

    Mine hates 140, really it hates everything. I found some Norma it seems to do 1moa with but fairly disappointing compared to my 6.
  5. M

    Seekins SP10 barrel question

    I got the 6 creed and was so impressed I got the 6.5. The 6 is a laser the 6.5 has been disappointing with fliers. Sent the 6.5 back still leaves a lot to be desired so I may just throw a craddock on it and be done with it. My 6creed shoots .25 all day my 6.5 struggles to hold 1 moa.
  6. M

    Seekins SP10 barrel question

    Factory Hornady match. I don’t bother with a chrono just whatever I need to make my dope and anpp trued out to 1100 yards.
  7. M

    Seekins SP10 barrel question

    I have 2 purchased in 2024. I’m not sure about barrel profile I can send pics. Both had the low pro gas block and NOT the gas block the sp10m has with the little flip handle.
  8. M

    TriggerTech Diamond AR10 vs AR15

    I have not had an issue with my diamond yet but do not have it on the lightest setting either. I also have the AR10 version.
  9. M

    Without getting in my hand comparing a seekins sp10 vs dd5 v4

    I had very bad luck and poor CS with DD, which is too bad their rifles are so pretty. I have a sp-10 that shoots lights out and is prob one of my fav rifles I have ever owned.
  10. M

    What AR15 cartridge is a worthwhile step up from 5.56?

    I have a 6creed built in an ar10 that shoots lights out to 1k yards easy. It’s now my go to pred gun. With a ar15 lower I would love to try the 6arc. I had a 300bo and truly hated it for numerous reasons. I ended up selling it. I do not like the 300bo as I don’t see it fitting in anywhere in...
  11. M

    DDM4 300S vs Seekins SBR8

    I would go Seekins all day. I have a Seekins sp10 and it’s a lazer. They also have great customer service. I had a DD ar platform that I sold. From day one it was one issue after another. DD had very poor customer service as well, I was very disappointed. I will never buy a DD again based off...
  12. M

    Looking for advice on a precision rifle

    that’s true if he isn’t counting his mdt chassis it’s possible.
  13. M

    Looking for advice on a precision rifle

    You cannot really build a custom for 2k. My actions alone were 1800 before any barrel gun smith work trigger etc.
  14. M

    300nm or 338lm

    Sounds like my gun smith and the consensus here all agree 300nm for the win Lol prob go 300nm as it sounds it’s my best bet.
  15. M

    300nm or 338lm

    Yes I could do 28 but wanted shorter for hunting I also wanted heavier bullets like 245/250 not 215 or I may as well just stick with my 300wm or do a 300prc. Barrel length of 26 plus my 12 inch can that’s a beast as it is in the field I guess I could do 28 or so idk.
  16. M

    300nm or 338lm

    I don’t play with hot loads, I had a bad experience years ago it will probably be a pretty mild load as long as it’s accurate. I was thinking 1:8 may be too fast if I ever need to shoot 220-230s if I can’t find heavy bullets ets so I figured 1:8.5 would be a good middle ground.
  17. M

    300nm or 338lm

    Thank you I am not worried about barrel life as I will prob shoot 400-500 rounds a year max and I can get a new barrel spun up pretty easy every 3 or so years
  18. M

    300nm or 338lm

    Also if anyone has experience in barrel twist I would love to hear. I was thinking a 26in 8.5twist brux
  19. M

    300nm or 338lm

    Hello all I am going to be building a custom large caliber rifle and I am torn between a 300nm and 338lm. This will be a heavy rifle for shooting steel and a few long range hunting spots I have for elk and bear. I originally wanted a 338lm but my smith recommended a 300nm with the new 250atips...
  20. M

    Triggertech diamond issues. HELP

    I have 4 TT diamond they all work flawless
Top Bottom
Back
Home
Forums
Merch
Alerts