Search results

Search the forum Search Articles
  1. mattwaage1

    SOLD 34mm Spuhr SP-4302, 1.5 high, 10.3 moa

    Tag
  2. mattwaage1

    Rifle Scopes For you Horus and Tangent Theta Lovers!!

    They are pretty epic optics. I've got 2 cw right now and I thought they would be a bigger deal than they are. The big Henny has the most perfect turrets ever ❤️
  3. mattwaage1

    Rifle Scopes Is the S&B PMII 5-25 still relevant in today's market given all of the options out there?

    I had Had a Terminator. It sucked. It was huge. Parallax was dumb. Eyebox/relief was bad. Glass was mediocre. Turrets/zero stop we're uninspired. I like the reticle and illumination was decent.
  4. mattwaage1

    Rifle Scopes Is the S&B PMII 5-25 still relevant in today's market given all of the options out there?

    Schmidt glass = vortex glass? No. Vortex reticles better than Schmidt reticles? Probably maybe? Schmidt offers a huge amount of reticles, but nothing that fits the exact bill of the mr4/skmr3/ebrsomething trend everybody loves in the last few years. They almost came close with that grid...
  5. mattwaage1

    Rifle Scopes Is the S&B PMII 5-25 still relevant in today's market given all of the options out there?

    Hdmr bruh
  6. mattwaage1

    Sold

    Darn that's a tight fit I'd have to open it up a bit. Hmmmm...
  7. mattwaage1

    Sold

    Thx!
  8. mattwaage1

    Sold

    Ok so, 1: all t3 actions are the same as far as short/long. 2: this has a bottom metal inlet for...? Factory tikka CTR bottom metal? 3: can we get a pic of the barrel channel with the barrel in it. I'm assuming you had a factory ctr in it?
  9. mattwaage1

    Rifle Scopes Zero Compromise Optic ring and mount options

    I asked Håkan last night and he said: Spuhr sp-6601 is on the shelf right now. I assume this means it should be heading to mile high reasonably soon. Sp-6602 (qd I think) is in the works. 2+ months out. I think these should be the ø36 H38 6mil cant mounts.
  10. mattwaage1

    .338 Lapua vs .338 Norma for AXMC

    Slightly different builds here but I went with the 338 Norma case over the 338 lapua case due to magazine length restrictions for my AXMC
  11. mattwaage1

    AI AWM value

    Too much. The AWMs people have been asking tons for a legacy product. Check the AX338s, they have had reasonable asking prices lately and have better/longer mags I believe.
  12. mattwaage1

    Rifle Scopes Is the S&B PMII 5-25 still relevant in today's market given all of the options out there?

    Absolutely. It's still the gold standard, always will be. Just now we have some "polished gold" also.
  13. mattwaage1

    AIAT

    N I know I just got some shooting buddies who sit at home with their scale and brag about the 5oz triggers, then get surprised every time they break a shot early ? Personally I prefer a trigger on the heavier side, as mech_emg said about, it breaks clean and you gotta pull it a bit. The ai...
  14. mattwaage1

    AIAT

    The factory ai trigger can be "fiddled" with a bit too. Just make sure to drop test it
  15. mattwaage1

    AIAT

    I'm good, thanks. I'm not a guy who spends 6 hours dialing triggers down to 8 oz. Aim. Squeeze. Break. Doesn't matter if it's a 6 oz trigger or 6 lb.
  16. mattwaage1

    AIAT

    I think all my triggers were just great from the factory. A lot of folks put so much thought into the trigger. I don't fiddle with triggers on any rifle honestly, ever bolt gun I've had has had a fine trigger for "competition" Buy the AT. Get a sfp model to avoid problems, or get the lfp and...
  17. mattwaage1

    AI AT fixed to AX folder. Conversion Instructions and pictures

    How'd that go? Bolt right on like the AT?
  18. mattwaage1

    AI AT fixed to AX folder. Conversion Instructions and pictures

    Take your skins off the AICS post the pics up here, everyone can see and compare for the future archive
  19. mattwaage1

    AXMC Lop adjustment stuck

    Supposed to just use the thumb screw to loosen it. Maybe that metal plate is a bit stuck. Loosen it and give it a boop on the butt.
  20. mattwaage1

    AI AT fixed to AX folder. Conversion Instructions and pictures

    Only problem with that is, on the ax stock the "locking" part is on that small extension. It would stay closed fine without it due to tension of the hinge IMHO. Otherwise you could punch that pin out and just team the ax stock holes to match that pin size?
Top Bottom
Back
Home
Forums
Merch
Alerts