Search results

Search the forum Search Articles
  1. Massoud

    Magazines not fitting in my bottom metal?

    That does sound like as described above by ShtrRdy, however if other mags are working then it's possible the tab on the new mags are out of place (too low on the mag body). It sounds crazy but the AI mags are all different sizes, I mean the actual AI brand ones. The 10rd are different than the...
  2. Massoud

    KRG Bravo Chassis

    On nearly all the chassis you can adjust the mag fit via re-positioning forend or trigger guard or both slightly. Thank you, Justin
  3. Massoud

    Kinetic Research Group SOTIC?

    @never_summer that is a damn fine group! Very impressive. Justin
  4. Massoud

    Tikka T3X CTR in KRG Bravo Feed Issues.

    -For now it's best to avoid Pmags with the Tikka T3 action, regardless of brand of chassis. Supposedly you can trim the feedlips to get it to fit up in there but long term durability of that mod is unknown. -The Accurate Mag versions are a good clone of the true AI mag. -For .223 the MDT...
  5. Massoud

    KRG Bravo stock

    There is an aluminum H-beam backbone in the Bravo that runs from the action to the tip of the forend. You're saying it's too flexible and going to a Mcmillan is the answer? @Banango @ncfireman83 Justin
  6. Massoud

    KRG Blem Sale

    Thank you for your business!
  7. Massoud

    Kinetic Research Group SOTIC?

    @Tris that is an interesting idea. There's a lot of things to the rifle of course but when you put them all in a regular manual it gets so big that no one reads any of it. Put a little grease on your latches and that will help. You can also adjust the latching "bite" by loosening all the...
  8. Massoud

    Night Vision KRG Bravo NV rail

    @charnicus yeah the NVMC kit is for the spigot, we have another version of that coming as well that matches the lines of the Spigot better but is just cosmetically different really. @ncr92 Yes the T1X has the universal backbone and the latest ones will have the NV mounting holes as seen above...
  9. Massoud

    KRG Bravo stock

    They do use the same backbone and they do take a TRG bipod although they don't have the steel insert plate in the backbone like the TRG so you might see some wear over time. The Elite Iron bipod fits as well. @SonicBurlap yes we are making more of those, we did not anticipate their popularity...
  10. Massoud

    Night Vision KRG Bravo NV rail

    @charnicus we switched from the Bravo backbone to a universal backbone that was the same for all chassis fairly early in 2018. Earlier in 2019 we added some additional mounting holes at the very front for a new style NV mount and any Rem 700SA chassis and I believe most other inlets ship with...
  11. Massoud

    KRG Bravo stock

    edit
  12. Massoud

    Kinetic Research Group SOTIC?

    @LANCER there aren't any e-clips on the SOTIC, there is one c-clip that goes on the trigger, on the pivot point for the sear release block arm. That arm can't fall out even if the clip comes off but it wouldn't hurt to pull the trigger and check. Make sure you remove the bolt first and keep...
  13. Massoud

    KRG Blem Sale

    There were a couple NV mounts for the TRG but they sold out. There's a few things left, still some Howa stuff, etc. so grab them up guys. Thank you for your business! Justin
  14. Massoud

    MDT acc or krg whiskey?

    @The_Count no worries I just want to make sure anyone seeing this 2 years from now gets the full scoop. Chassis are definitely not a one design fits all, we even have two different ergonomic styles (Bravo vs W-3/X-ray). Cheekpiece shape is a key area that is often overlooked. We always tell...
  15. Massoud

    MDT acc or krg whiskey?

    This is not completely representative of reality. 1. Our business model is not at all built on selling accessories. Some accessories are so low volume that we barely make a profit on them and there's not even dealer discounts. Think about it, it's an accessory for an accessory (the...
  16. Massoud

    KRG Bravo Chassis

    Hi guys, here's a couple ways to get the rail installed: 1- With the chassis completely assembled you can slide the nuts in if you are good, or if you tape the nut to a flat blade screw driver and insert it through the spigot hole 2- Remove forend, install rail onto forend, install forend...
  17. Massoud

    KRG Whiskey 3 Chassis-Let's See Them

    @DDRH65CM Yes two washers on the front. Rear gets one for polymer trigger guard and none for older aluminum guard.
  18. Massoud

    KRG Bravo for CTR that can take TRG/CTR mags?

    Hi Gents, yeah it would be nice to have a long action T3 but they didn't make the action long enough unfortunately. That's why you don't see any T3 LA chassis, there isn't a magazine short enough unless the shooter loads his rounds short. Justin
  19. Massoud

    KRG Bravo Chassis

    @Mk32784 There is not a green option planned for the Howa, just the black and FDE. Thank you for your interest. Justin
  20. Massoud

    KRG Bravo Chassis

    @SonicBurlap that barrel will clear. In fact the Bravo's (and W-3 and X-ray) are starting to come with a slightly revised backbone that has the barrel channel cut the same as the bedding area. Basically a full 1.25" straight cylinder will clear, these are the ones that come with the 10x...
Top Bottom
Back
Home
Forums
Merch
Alerts