Search results

Search the forum Search Articles
  1. V-Ref

    Kestrel Compass issues

    I think you've got it except...generally wind direction is expressed on the "heading" you'd be facing if you looked directly into the wind. Look up your local airport weather observation and stand outside and check the wind direction....it'll make sense. So in your example above if DOF is 225...
  2. V-Ref

    F T/R Competition New to F Class

    http://bulletin.accurateshooter.com/2016/04/joystick-bipod-shooting-tips-by-joy-pod-inventor-seb-lambang/
  3. V-Ref

    PRS Talk Lazer Range Finder w Ballistic Calculator

    Some of the longer stages/smaller or obscured targets you may not be able to obtain a laser range, and subsequently no solution. Additionally, some stages (ie. elevated platform that can only facilitate one shooter/RO at a time) you'll end up slowing down the match flow. It is a nice system...
  4. V-Ref

    Elr champion

    Remember....Everyone is a Champion on the inside though...
  5. V-Ref

    PRS Rifle Build

    What was the response from Defiance after you told them of your experience
  6. V-Ref

    Field firing solutions compared to the rest

    And here I thought AB stood for Arrogant Ballistics this whole time.
  7. V-Ref

    Gunsmithing 7RM + 180 ELD-M reamer spec questions

    RBros has a 7RM reamer that shoots like a dream even with the "retarded" belt. I'd give Travis a call.
  8. V-Ref

    Shot Show

    A single Space Gun/Sponsored/Unlimited class may generate 10 systems on the shooting line for a regional "match", whereas the addition of a <25# .585 Bolt face class and now you have 3 times as many shooters at your event.
  9. V-Ref

    Shot Show

    The reason to encourage classes is to encourage participation and develop the ELR market. Without classes the current vector of ELR "competitions" will likely be Exhibition/Promotion events like they largely are now (I.e. small subset of industry connected & sponsored shooters) as these shooters...
  10. V-Ref

    Rifle Scopes Diopter/eye box questions?

    Take a piece of paper (envelope, notebook, etc) stand beside your rifle, and put it behind your eyepiece. Watch the exit pupil change in size and intensity as you vary both the magnification on the scope, and the "eye relief" of your sheet of paper. The amount of fore/aft/left/right/up/down of...
  11. V-Ref

    Issues with Shoulder Bump in Custom Whidden FL Dies

    LE wilson will take 3 pieces of several times fired brass and hone you out a FL Bushing die as well if Whidden won't make this right. The shoulder diameter of fired cases shouldn't exceed the reamer print dimension.
  12. V-Ref

    The Fix from Q

    Cut and paste the link below just omit the !!!!! !!!!!www.facebook.com/COLIONNOIR/videos/1401329293250157!!!!! www.facebook.com/COLIONNOIR/videos/1401329293250157
  13. V-Ref

    Issues with Shoulder Bump in Custom Whidden FL Dies

    Ok My next three questions would center around determining if in fact your fired brass diameters actually do indeed exceed the finish reamer print diameter dimensions. Diameter of cases with several firings on them at 1. 1.200" north of case head (your reamer print has this 1.200 dimension...
  14. V-Ref

    Issues with Shoulder Bump in Custom Whidden FL Dies

    Samb300 Is your reamer a removable pilot or solid pilot? Do you have access to high quality measurement tools (not a $30 set of digital calipers). I have some too but it'll add credibility to your measurements as literally .001 makes a difference here. I find it troubling looking at a fired...
  15. V-Ref

    Issues with Shoulder Bump in Custom Whidden FL Dies

    Can you post your reamer print
  16. V-Ref

    121gr flatline loading data

    6.5 Creedmoor 24" LRI Amax throat 8 twist Lapua brass 39.5 H4895 BR4 122 WFL 2.935 COAL 3040, 3031, 3049 fps No pressure signs on bolt face/primers That's as fast as I went in that rifle
  17. V-Ref

    Issues with Shoulder Bump in Custom Whidden FL Dies

    What are the dimensions of: Body & shoulder diameter of virgin brass Body & shoulder diameter of once fired Body & shoulder diameter of sized cases that enable a light to no drag/friction feel when closing the bolt on fired but sized brass. Keep in mind measuring headspace at a single datum...
  18. V-Ref

    King of 2 Mile Update

    Some didn't have advance knowledge of when registration for the match was going to open? I was under the impression that knowledge was "released" early to the chosen few. If so, this would seem to stifle true competition and is damaging to the credibility of the KO1.9M exhibition labeled as a...
  19. V-Ref

    Can't Get Standard Deviation Out Of The 20's

    Agreed!
  20. V-Ref

    King of 2 Mile Update

    How could that happen though? This was a public match right?
Top Bottom
Back
Home
Forums
Merch
Alerts