Search results

Search the forum Search Articles
  1. A

    Experience With N540

    Re: Experience With N540 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rocketron</div><div class="ubbcode-body">N5 and N1, one is single base and one is double base. i don't remember which one is which</div></div> N5xx == double base. N1xx == single.
  2. A

    H110 in 18" Bbl .308-somebody w/ QuickLoad?

    Re: H110 in 18" Bbl .308-somebody w/ QuickLoad? No problem. If you work up to any of these max loads and use a chrono, it would be best. If you work up and just watch pressure signs on the brass, it ought to be okay. Ideally double-check your actual 308 case capacity against what I was using...
  3. A

    H110 in 18" Bbl .308-somebody w/ QuickLoad?

    Re: H110 in 18" Bbl .308-somebody w/ QuickLoad? Here's RL-15: <div class="ubbcode-block"><div class="ubbcode-header">Code:</div><div class="ubbcode-body ubbcode-pre" ><pre> Cartridge : .308 Win. (SAAMI) Bullet : .308, 208, Hornady A-MAX 30712 Useable Case Capaci...
  4. A

    H110 in 18" Bbl .308-somebody w/ QuickLoad?

    Re: H110 in 18" Bbl .308-somebody w/ QuickLoad? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MontanaHick</div><div class="ubbcode-body">Wow, now THAT'S what I call a response. Thank you! This is exactly what I needed (besides shelling out the $ I don't have...
  5. A

    H110 in 18" Bbl .308-somebody w/ QuickLoad?

    Re: H110 in 18" Bbl .308-somebody w/ QuickLoad? QuickLoad shows a bit different case capacity calculation for that COAL than you are showing - I think I'd previously tweaked my values to match what I found from weighing the water capacity of Lapua 308 cases, but still, it's way off from what...
  6. A

    308 brass wtf.. cant find any..

    Re: 308 brass wtf.. cant find any.. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: FullMetalJacket</div><div class="ubbcode-body">open to suggestions and links of instock brass..</div></div> The good stuff is in stock at Bruno's...
  7. A

    Resize brass that still fits in chamber ?

    Re: Resize brass that still fits in chamber ? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Golfy Sniper</div><div class="ubbcode-body">I would recommend RCBS Precision MIC </div></div> Seconded. This is a must-have tool.
  8. A

    .308 load question...

    Re: .308 load question... 8208 XBR and Berger 155.5 FB
  9. A

    reload equipment for the range

    Re: reload equipment for the range <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: afrancke</div><div class="ubbcode-body"> turbo54, how do you power your chargemaster? Does your shooting spot have AC power available where you load, or do you take a battery and...
  10. A

    reload equipment for the range

    Re: reload equipment for the range <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: aloreman</div><div class="ubbcode-body">I like wilson dies and an arbor press</div></div> This is exactly what I've done (but I've also hauled the Co-Ax to the range as well)...
  11. A

    Spuhr Mounts...

    Re: Spuhr Mounts... What scope are you using it with? I have a Spuhr with TRG mount with the Premier Heritage 3-15x50 on a TRG-22 with folding stock and it's just about perfect with maybe one click up of the adjustable cheekpiece from the lowest (standard) setting of the cheekpiece.
  12. A

    Best Press

    Re: Best Press <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Burleyboy</div><div class="ubbcode-body">Do you have to buy the forster lock rings to use your dies in the co-ax or can you use other brands?</div></div> Hornady, Sinclair and Redding all work.
  13. A

    Die set up for TRG 22

    Re: Die set up for TRG 22 There are particular advantages to FL sizing, namely consistent case volume and reliable chambering every time, but you give up minimizing brass "work", with associated potential impact on brass life and (perhaps more importantly) you give up the "custom chamber fit"...
  14. A

    Starting from scratch.

    Re: Starting from scratch. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body">I tried that Tempilaq stuff and it was plenty good to make sure that you are not annealing the case head, but sucked at telling me the degree...
  15. A

    Starting from scratch.

    Re: Starting from scratch. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body">I do like the fact that the Giraud appears to stay set up. </div></div> That is appearance only, I'm afraid - unless somebody has figured out...
  16. A

    Starting from scratch.

    Re: Starting from scratch. Very nice! Solves the wind messing with the scale nicely. Do you sit in there on a stool, or what?
  17. A

    Will 155's work?

    Re: Will 155's work? I shoot small groups (0.5 inches or less at 100 yards) with Berger FB 155.5's out of a TRG 20" barrel, 1:11 twist. Maybe try a different bullet before giving up on 155 entirely.
  18. A

    Starting from scratch.

    Re: Starting from scratch. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: msc</div><div class="ubbcode-body">I will be using this all at home reloading not traveling. My range is not setup for bench reloading.</div></div> That's too bad. It is a big handicap in...
  19. A

    Looking for powder advice, 308 Win

    Re: Looking for powder advice, 308 Win <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Carter Mayfield</div><div class="ubbcode-body">I just bought some 8208 xbr this weekend. I understand it works better with the 155's than Varget. My standard load is Varget and...
  20. A

    Starting from scratch.

    Re: Starting from scratch. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: msc</div><div class="ubbcode-body">This would be a buy once cry once purchase and not all at one time.</div></div> Generally I'm of the same mindset, and approached buying my setup the...
Top Bottom
Back
Home
Forums
Merch
Alerts