Search results

Search the forum Search Articles
  1. J

    6.5 Grendel

    When I first started messing with the Grendel I was part of a blind crowd trying to make it perform like a 260 rem. Guys were pushing it to the limits and ruining equipment in the process. Finally I settled on 27.2 gr of AR Comp, 120gr SMK, CCI400 primer, OAL between 2.19 and 2.20". I never...
  2. J

    Member Link Up Any other mifflin sportsman association members?

    Sounds like a gamble. And near impossible around hunting season.
  3. J

    Member Link Up Any other mifflin sportsman association members?

    Well, if you see pink plates give me a shout.
  4. J

    Member Link Up Any other mifflin sportsman association members?

    I was up a month ago. They have a lot of new steel now. If I remember correctly 800 and 900 were a bit empty but otherwise it's fine starting at 300. The old stuff is pretty beat up though. I prefer to take my own steel too. It's hard to see your shots on a plate when theres a million hits...
  5. J

    Member Link Up Any other mifflin sportsman association members?

    BTW: where did you get the membership cost? I've always paid $90.00 for my wife an I. Nothing on the website about raising rates. That really would suck.
  6. J

    Member Link Up Any other mifflin sportsman association members?

    Sorry I was asking ironoperator87 but hope to run into you up there. Typically a great group up there.
  7. J

    Member Link Up Any other mifflin sportsman association members?

    I'm originally from Tamaqua. Still hunt there from time to time. Where you at?
  8. J

    Member Link Up Any other mifflin sportsman association members?

    Where are you from?
  9. J

    .308 Subsonic-Drilling out flash hole ?

    I'm loading subs for the 300 blackout and the 260 Rem. I have never enlarged flash holes and never had an issue.
  10. J

    Lehigh Defense 121gr 6.5mm Creedmoor Match Solid

    Greg, forgot to mention: These bullets have a real small bearing surface which seems to allow a little more push. Just be careful and work up slowly. My particular rifle has a history of handling rounds that most would normally call hot .
  11. J

    Lehigh Defense 121gr 6.5mm Creedmoor Match Solid

    I've tried H4350. My best was 1moa with 46.0gr, cci200 primer For the 121 Match Solids here's what I've tried: H-4350 46.2 gr. and a CCI 200 primer gave me 1MOA. I never chronoed the load because I didn't get the accuracy I wanted. IMR-4955 46.0 gr and CCI 200 Primer accuracy was good at 100...
  12. J

    Lehigh Defense 121gr 6.5mm Creedmoor Match Solid

    I'm loading the 121's in Hornady brass with turned necks, neck sized, using CCI BR2 primers and 44.6 grains of IMR 4451. I don't know the jump but it's far. I load to mag length and I'm sure you know how sleek this profile is. This bullet is leaving my 20" suppressed CTR barrel at 3040fps with...
  13. J

    Lehigh Defense 121gr 6.5mm Creedmoor Match Solid

    AP2020, I'm with you on these. Lately I found a terrific load for my 260 using these and I'm holding slightly less than 1/2 MOA. I just bought the 257gr Match Solids to try in my 338 LM. Hope to have similar results. BTW: I really enjoy your videos. All the best
  14. J

    Lehigh Defense 121 Match solids

    So I finally settled on a recipe. Hornady Brass turned and neck sized only. CCI BR2 primers, 44.6 gr. of IMR4451. I did not measure the jump but I can tell you it is a long way. I mag feed everything so it has to fit. My SD is 11 fps. This round is moving at 3040 fps out of my 20" CTR with...
  15. J

    338 Lapua and IMR 7977

    I got a buddy in FL that's about due for a barrel change. He's not a precision guy and only shoots to 600. I'll check with him and PM you if you dont mind.
  16. J

    338 Lapua and IMR 7977

    That's suprising. I have 4 shooting buddies that run RPR's. Two are 338 LM. They're all having good results. Good luck with the new set up. Let me know if you want to sell the barrel. One of the guys may want it.
  17. J

    338 Lapua and IMR 7977

    I'm loading the 285 ELDM's with 98.0 grains of RL33. Super happy with this combo. The ELDM's dont seem to be too sensitive to seating depth.
  18. J

    Member Link Up Any other mifflin sportsman association members?

    Ironoperator87, I'm originally from Tamaqua. In fact, I still hunt up there occasionally. Where are you at?
  19. J

    Member Link Up Any other mifflin sportsman association members?

    I made it there about 4 weeks ago. They got some new steel at almost every range. Don't go up there with a low stance car though. You'll likely not make it past 500 especially if its raining.
  20. J

    Photos Car collection!

    Gotta love the 44 mpg
Top Bottom
Back
Home
Forums
Merch
Alerts