Search results

Search the forum Search Articles
  1. B

    Rifle Scopes Revisiting drop testing

    I've got a foot in either camp. I don't know "formidilosus" from a bar of soap and I'm disinclined to place too much trust in a lot of unsubstantiated claims on the internet. However the "drop test" results as presented do show some pattern to reliability. They've certainly induced a lot of...
  2. B

    Rifle Scopes March 5-42 Gen 2 PRS Edition – FML-WBR or FML-MT? Seeking feedback from those who've switched from tree reticles

    Ah the winds of fashion, how they change
  3. B

    Nightforce | Shot Show 2025

    2 - 12 x 42 or 3 -18x 44 NX6 with a 3-24x42 March F form factor. please please please please please
  4. B

    Manners Composite Stocks Estimated Lead Times

    Looking at a Manners T2A-GAP with a 700 short action - standard fill - roughly what contour of barrel suits to have balance a few inches forward of the mag well for PRS style matches? cheers
  5. B

    16-18 inch shorty rifles

    What's the green composite stock?
  6. B

    Mixing brass lots, same headstamp.

    Depends on your objective. What are you using the ammo for?
  7. B

    Mixing brass lots, same headstamp.

    That's interesting. Assuming you're talking 20 + rd groups?
  8. B

    Rifle Scopes Help me choose a light(er) FFP hunting/target scope

    March 3-24x 42 or x52
  9. B

    New Web-Based Interior Ballistics Calculator – Precise Load

    I'd like to try the cartridge designer feature - can't work out how to PM you?
  10. B

    New MPVO - Zero Tech 1.5-12x36 FFP Vegence HD

    Horrendous video. Scope may be interesting. I give it a 40% chance of actually being interesting
  11. B

    6gt

    Precisely. I'm using a comparator on the case shoulder. The factory brass that I measured was about 1.407" (this is clearly just a reference measurement relevant to my measuring system only). I don't have any more new brass to measure to double-check this. Most once-fired brass is in the...
  12. B

    6gt

    Just ejector marks I won't go .236" on my next barrel.... it was a case of taking what happened to be in stock.
  13. B

    6gt

    2600-2680 fps 32gr-33gr varget with either bullet and 2700-2780fps 37gr-38gr 4350 with 108 ELD
  14. B

    6gt

    I'm shooting an 18" 1:8" twist Brux barrel with .236" bore. I'm bumping shoulders about 0.002" but it's hard to say precisely as it appears that the brass has fire-formed various amounts since new. The max I've measured is about 0.008" shorter on a new case vs a 1x fired case. I've shot...
  15. B

    6gt

    I am getting sporadic ejector marks on my brass with loads that are under the Hodgdon book max. No carbon ring (checked with borescope) Alpha brass - 1x fired. Read somewhere this is normal with Alpha brass. Anyone else seen this?
  16. B

    6 Creedmoor Berger 105 hybrid help

    They all look identical. Pick any and shoot it.
  17. B

    ELDM lot-to-lot variation

    I'm shooting the 108gr ELDM from a 6mmGT in a Brux barrel. I tested loads with one particular box to check if my barrel liked the bullet - shot 3x 10rd groups around 0.5-.0.6 MOA group size (0.05 - .06MRAD mean radius). Seemed all good, so I purchased 1000 bullets of a different production lot...
  18. B

    223/for distance

    Aside from the difficulty of getting consistent velocities with .223, and the lower impact signature, the 88s or 85.5s should be in the ballpark of being reasonably competitive with the 6mms, with some serious advantages in recoil & cost. I'll probably try a barrel set up for 88s when my current...
  19. B

    223/for distance

    I guess a person can always shoot 88s in Open
  20. B

    223/for distance

    Anyone know why tac class in PRS is restricted to 77gr max ?
Top Bottom
Back
Home
Forums
Merch
Alerts