Search results

Search the forum Search Articles
  1. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Now that's quite an optic! How do you like it? What reticle do you have? Is the box mounted on the side of the scope an electronic level?
  2. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    DTA SRS-A1 with a few accessories. 31" 6.5 PRC Bartlien barrel, Surefire can, S&B 5-45x56
  3. Dragoon300

    Anyone built a 1/2 minute rifle off a Wby action?

    It sounds like you have a couple nice hunting rifles! The Mark V is a great action, 60 degree, very strong with added protection around the bolt against gas leaking in your face in the event of a ruptured case. Many of their factory rifles do shoot well, I had one that did, although I did not...
  4. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Excellent, thanks! I have heard that it is advisable to carry your optic with you on the airline, makes good! Do you have the new 30-06 SRS conversions available?
  5. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Does anyone, or anyone you know swap an optic back and forth between two different rifleson a regular basis? I like my SB 5-45x56 on my SRS, and am thinking of getting an HTI, and would like the same scope on both and really don't want to buy another one. I have charted zero shifts for my...
  6. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Thanks, I will place a order!
  7. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Are the 6.5 PRC mags available now?
  8. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    I looked the Unique Alpine up and read about it. The first reaction I had when I saw your photo of one, was how comfortable it looked! Then the first article I read made a point of how comfortable it is! It truly is a very nice rifle. They said Unique Alpine worked with FN to do the APG3, or...
  9. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    I've never seen one before, it is a very nice looking rifle!
  10. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    I agree 100% This platform is inherently accurate. It isn't perfect, but almost!
  11. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Thanks! I didn't know DT was that smart! I do mean that. On another note, you did some amazing shooting with your's!!! I haven't been able to get to a range longer than 1050 yards yet, but I want to. I once had two barrels made by a very prominent maker that told me he didn't think that "toy"...
  12. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Doesn't the brake screw on the muzzle? Which it shows M22 x 1.5 threads. I must have missed something.
  13. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    .375 CT .408 CT .416 Barret .50 BMG Barrel Length 29" 29" 29" 29" Barrel Twist 1:10.5 1:13 1:13 1:15 Muzzle Thread Pitch M22x1.5 - 6H M22x1.5 - 6H M25x1.5 - 6H M25x1.5 - 6H Weight 19.5lb 20.35lb 20.35lb 19.9lb Length Overall 45" 45" 45.75" 45.75" Magazine Capacity 5 5 5 5 Range...
  14. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Thanks
  15. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Thanks for the information and pictures, I don't have a A2 or M2, but am interested in the differences from the A1. Do you have pictures of the handguard? Or any thoughts on different handguards?
  16. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    It should because that's what it is supposed to be. However, from what others have said, the A1's have been a bit loose with their tolerances and will allow barrels larger than 1.2500 to be installed. On the other hand, A2's have been held tighter to accept 1.2500 maximum diameter, not over.
  17. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    The barrel shank diameter is 1.2500" +0/-.0015" do not go over 1.2500" on an A2 as they are known to be held to a tighter tolerance than the A1's
  18. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    It depends on his experience and tools. Accurate measurements, and a CAD / CAM system helps. Knowing the type and alloy of the steel, and the heat treat specifications. HTI and SRS bolt heads can be measured, and hardness checked, and with the right equipment the steel alloy can be determined...
  19. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    I have thought a detent to keep the bolt from easily rotating up durring carry would be nice myself.
  20. Dragoon300

    Official (DTA) SRS, HTI, Covert, Hunter Thread

    Have you actually heard of someone trying to convert an SRS to different mags? I would be interested in seeing what they did or how far they got.
Top Bottom
Back
Home
Forums
Merch
Alerts