Search results

Search the forum Search Articles
  1. QuietShootr

    .300WM sizing issue - FL Type S shaving brass off case body?

    OK - another question. Does it work to use the Innovative die then a neck sizer only, or is this a bad idea?
  2. QuietShootr

    .300WM sizing issue - FL Type S shaving brass off case body?

    Okay - the fired cases are uniformly .5125 JAB. A fired case run into the Type S die alone measures .5095 and shaves in the same place. A fired case in the Innovative die comes out at .5100, then running the same case into the Type S resulted in .5095 and a very light shave. I took the die...
  3. QuietShootr

    .300WM sizing issue - FL Type S shaving brass off case body?

    It's Winchester brass- I'll take some measurements tomorrow. I was using the collet die first precisely because I didn't see how using it AFTER the FL die wouldn't screw up the headspace. I'm bumping my shoulder just a hair under .002, and I figured the brass displaced by the collet die had to...
  4. QuietShootr

    No Interest for a year! 0% APR for 12 mos WAC

    I see a divorce in my future.
  5. QuietShootr

    .300WM sizing issue - FL Type S shaving brass off case body?

    I recently started loading .300WM for a Sako TRG-42, and one of the things I was advised to get up front was the Innovative magnum collet die along with the usual Type S neck and FL dies. I found the Innovative die does what it's advertised to do (i.e. size the part of the belted magnum case...
  6. QuietShootr

    300 win mag 208gr a-max

    If this helps, I use 73.5 of RL22 in a winchester case with Federal 215 primer. Gives 3080fps out of my 27" Sako.
  7. QuietShootr

    Type-s FL die runout - Help, what am I doing wrong?

    Funny, I've been fighting the same issue for a long time. It never really occurred to me that this was something the die itself might be causing.
  8. QuietShootr

    Rifle Scopes S&B.. NF.. where to put the money on first really high end glass???

    That right there is why I'd save my money and go NF over Vortex.
  9. QuietShootr

    TRG42 .300 accuracy potential?

    What should I expect out of this gun? I'm still trying to work up a load. It looks like it wants to shoot, the CBS goes right into the X-ring at 100 every time. It's after I get a few rounds down that one will jump out of the cloverleaf, and I think it's me and not the gun. Most of the...
  10. QuietShootr

    4 dead Federal 215 primers out of 25 rounds?

    Tard alarm. Four powder-free cases.
  11. QuietShootr

    4 dead Federal 215 primers out of 25 rounds?

    They didn't fire even on the 2nd restrike, which I would think would be plenty if it were a seating problem. Is there a known bad lot of 215s? The firing pin indents are strong and clear - it's not the gun.
  12. QuietShootr

    Rifle Scopes Nightforce Atacr question

    00, are you saying (for instance) on my 3.5-15 the calibration is proper when the magnification is turned up to the stop, or when the 15 hashmark is lined up with the witness mark on the tube? Mine is off about a half line width with the ring against the stop. Sent from my iPhone using Tapatalk
  13. QuietShootr

    Help with choosing Accuracy International rifles

    And hey - I don't care if anyone wants to buy anything they want, other than I reserve the right to think you're a douche if you buy things just because 'they're badass!!'
  14. QuietShootr

    Runout problem with factory spec chamer

    Yup, this.
  15. QuietShootr

    Help with choosing Accuracy International rifles

    Unless OP is one of those guys who likes to be able to tell people he has an AI or a .300/.338 with some exotic glass, and will shoot about 50 rounds a year. I was surprised to find out these are more common that I suspected. "It's badass!!!" is a good enough reason - I had a guy ask me where...
  16. QuietShootr

    Help with choosing Accuracy International rifles

    Jesus, why not just light $5 bills on fire and cut out the middleman? I shoot my .308 to 1000 regularly, I'm not even going to put wear on my .300 unless I'm shooting at LEAST 1000.
  17. QuietShootr

    Runout problem with factory spec chamer

    Why so much neck tension? If things are working well with .334, why not go with that? You still have way more than I use, and my bullets don't move.
  18. QuietShootr

    Rifle Scopes Zero stops for SWFA Super Sniper Scopes

    Ordered!
  19. QuietShootr

    F T/R Competition New F-Class Division

    LOL....... no. And the fact that you refer to shooting as a 'hobby' tells me that you don't, and won't, get it.
  20. QuietShootr

    F T/R Competition New F-Class Division

    Yeah, you're right. I don't know shit. :-)
Top Bottom
Back
Home
Forums
Merch
Alerts