Search results

Search the forum Search Articles
  1. K

    New from Lexington KY

    1.5 hours east of you, 1st Saturday each month open range practice out to 685 yds. 3rd Saturday prs style competition
  2. K

    A & D FX120i & trickler questions

    I never turn mine off, other than per calibration instructions.
  3. K

    Diving into 6 Dasher loading

    I bought L E Wilson bushing fl sizing die and L E Wilson chamber type seating die for use on a arbor press. Same setup I've been using on 6.5 CM .
  4. K

    Rounds binding in mags.

    I only removed the burr edges (very little material was removed).
  5. K

    Rounds binding in mags.

    Same issue with ACR mag, I two side taped fine wet dry sand paper to a paint stir and removed all burrs from the lips and added a mag extension. Smooth as butter now and no brass damage.
  6. K

    Manners PRS 1, add fill?

    Those of you shooting the above stock, did you add fill or without. Barrel will be MTU
  7. K

    Primal rights dasher conversion fitment

    I have two ACCURATE-MAG brand 308 mags, will the primal rights kit work in them
  8. K

    Diving into 6 Dasher loading

    New question, does hydro forming put stress on the single stage press. Should I look to source a used press to to use exclusively for hydro forming. Don't want to damage my rocks chucker smashing it with a hammer.
  9. K

    SOLD Whidden 6 Dasher FL Bushing Die Set w/ modified case

    oh my, I bought sizing and seating dies yesterday, should have waited one day.
  10. K

    Diving into 6 Dasher loading

    Whidden or Hornady hyd forming die. I been using full length bushing type dies, which bushing for Lapua brass. I'd like to have my brass worked up before the barrel is complete.
  11. K

    Photos Wow!

    ? The brass in the SAP is empties?
  12. K

    Annie brass cartridge Annealer

    I've used one for a couple years, they are great, quick. I use the water cooled coil. Cycle time on 223 and 6.5 CM is about 2.0 to 2.5 seconds per piece. I made a trap door type base to set the unit on, drop brass in coil and push the start button, when light goes off, drop the brass out the...
  13. K

    Manners stock building web page question

    I tried one that a guy that was shooting one of our club matches was shooting and liked it. My reason for going away from trued rem 700s was ejection issue and I liked the way the Atlas ejected and the smoothness of the action
  14. K

    Manners stock building web page question

    Tried all day yesterday, no answer left message, got a call back but connection was back, they hung up but never called back?
  15. K

    Manners stock building web page question

    Trying to build a PRS1 stock, when I get to receiver page the one I will use is not listed (using a Kelbys Atlas). Most of the receivers on the list are Remmington clones so if ur using mini chassis and a rem clone is it important.
  16. K

    Calibration weight for Fx120i scale

    Need a cal weight, what and from whom did you buy for lab quality scale
  17. K

    How to know when your brass is due to be replaced

    So, I just keep cycling it until a mechanical failure. Wow, maybe I'll just pitch it and buy a new box of brass.
  18. K

    How to know when your brass is due to be replaced

    I've been using the same 100 pieces of Lapua (6.5 CM) for approx. 15 cycles, annealing between each firing. How will I know when it's toast. Baring mechanical failure, will accuracy go away, small primer pockets are still good. What say you Jude.
  19. K

    Shooting glasses for shooting scoped rifles?

    I shoot in the Panther post models due they were first with clip in prescription lenses. If I was starting now it would be Outlaw X7
  20. K

    Shooting glasses for shooting scoped rifles?

    I've been wearing Pilla glasses for about 4 years. Granted I started wearing them for skeet an everything about skeet is more expensive. What I like about them is corrective lenses fit in behind the colored Plano lenses
Top Bottom
Back
Home
Forums
Merch
Alerts