Search results

Search the forum Search Articles
  1. G

    Gunsmithing need guidence on a build.

    Re: need guidence on a build. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: BOLTRIPPER</div><div class="ubbcode-body">why </div></div> What the fuck's it got to do with ya.
  2. G

    Gunsmithing 223 sako extractor

    Re: 223 sako extractor And whats your question.
  3. G

    Gunsmithing Counterboring inside the muzzle of a barrel.

    Re: Counterboring inside the muzzle of a barrel. If you absolutely have to go that route you'd be better off with a small boring bar. Through in the bore first then go in with your boring bar. You could finish off the crown then with a 60 degree centre drill running at about 40rpm.
  4. G

    Gunsmithing Counterboring inside the muzzle of a barrel.

    Re: Counterboring inside the muzzle of a barrel. I think you'd be best to just cut off that part and then concentrate on recrowning it.
  5. G

    Gunsmithing Help with caliber swap

    Re: Help with caliber swap It is possible alright but check also what twist is in the .223 and see if its compatable for the swift. You could get the bolt opened up and a Sako extractor put in.
  6. G

    Sig 556 rebarrel

    Re: Sig 556 rebarrel If you ask Chad Dixon, (C.Dixon) on here he should be able to get you sorted.
  7. G

    Sig 556 rebarrel

    Re: Sig 556 rebarrel It was done with a Trueflite Remington varmint contour barrel. I charged him 900euros which I think was pretty reasonable given the job on hand.
  8. G

    Sig 556 rebarrel

    Re: Sig 556 rebarrel Yes it is an actual 556, this is the Swiss model.
  9. G

    Gunsmithing Custom Titanium Action?

    Re: Custom Titanium Action? Oh ya, Tom Myers has been on the go for some time now. He wouldnt get into something that didnt work well. Im personally looking forward to getting my hands on a few of these. Tom would be good to go.
  10. G

    Gunsmithing Sako Extractor Issues?

    Re: Sako Extractor Issues? Check to see if your counterbore dimension is interfering with anything. If its a little too tight it may be stopping the extractor from opening out and clipping over the rim.
  11. G

    Gunsmithing Blueprinting factory action

    Re: Blueprinting factory action Its usually never money well spent, it gives varying degrees of improvement. If its for a hunting rifle I wouldnt bother but for something more serious like a long range varminter or target rig then maybe but as already mentioned by another poster it sometimes...
  12. G

    Gunsmithing 338 lapua reamer

    Re: 338 lapua reamer Correct, or you could just send your order to Dave Kiff and explain exactly what you require, Dave will know exactly what you need.
  13. G

    Gunsmithing Boyd's Thumbholes? What do I do?

    Re: Boyd's Thumbholes? What do I do? I use them all the time. There a great option for a guy that really doesnt want the really expensive route. Bedded or not they work a treat and for small money.
  14. G

    Gunsmithing Rough Chamber...Any Way To Fix?

    Re: Rough Chamber...Any Way To Fix? Leave it alone, theres nothing wrong with it.
  15. G

    Gunsmithing WD 40

    Re: WD 40 Thats amazing, Im goin to try that on my back problem. Hope I dont come back in 6 months with some kind of incurable rash. Is it actually only fish oil?
  16. G

    Gunsmithing Couple of questions about bedding a scope rail

    Re: Couple of questions about bedding a scope rail Quite possibly the screws you've got are flat bottom screws and dont really aid the alignment of your base, as soon as on comes loose your in trouble straight away. Take a look at that and if thats whats wrong get some angle based screws...
  17. G

    Gunsmithing Barrel to Stock Opening Relationship

    Re: Barrel to Stock Opening Relationship It really would'nt matter as long as the barrel is comfortable inside the channel and not touching the stock. It may look a little cosmetically wrong if you've got a skinny little profile inside a stock with a fairly large inlet, other than that there...
  18. G

    Gunsmithing removed my first barrel from action

    Re: removed my first barrel from action Good stuff man, you just keep at it.
  19. G

    Gunsmithing Bedding Bell & Carlson A5 Medalist Tactical????

    Re: Bedding Bell & Carlson A5 Medalist Tactical???? Oh man here we go again, poor old Tripwire's goin to have to put down his beer and come to everyones rescue again. Great guy Tripwire, he's saving the world and getting no thanks for it.
  20. G

    Gunsmithing To bed or not to bed?

    Re: To bed or not to bed? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tripwire</div><div class="ubbcode-body">Oreos...they go best with beer. Bed or don't bed...I could care less. The dude asked for opinion/experience....not assumption and speculation. I'd...
Top Bottom
Back
Home
Forums
Merch
Alerts