Search results

Search the forum Search Articles
  1. S

    Rifle Scopes Mark 4 10X40

    Re: Mark 4 10X40 If you are shooting for score, then whatever. Shooting to live/survive, nothing better than the M3 There are several different .308 and .300win mag cams out there. You can paint the cam and use finely-brushed nail polish to set your personal yardage zeroes. Should come...
  2. S

    Gunsmithing Bedding over an HS Precision bedding block?

    Re: Bedding over an HS Precision bedding block? Lots of issues to look at here. Is the stock original to the rifle? Is the forward action screw bottoming on the barrel threads? How are your scope mounts and rings? Not to mention, how about your bullet seating depth? Touching lands...
  3. S

    Gunsmithing test indicators and holders?

    Re: test indicators and holders? I have a Mitutoyo indicating depth gauge that has an indicating needle you can adjust with threaded shaft extensions to about 8". The indicator measures hundredths of mm, or .01mm. This is mit code #7211. Very flexible tool as the ground base, for depth...
  4. S

    Gunsmithing converting 30.06 into 300 win mag?

    Re: converting 30.06 into 300 win mag? Have nice Like New LA BDL Magnum bolt, and a couple of Rem 700 300win barrels, if you want to trade your .472 long action bolt in a deal.
  5. S

    How Accurate can an AR SPR really be?

    Re: How Accurate can an AR SPR really be? Last thing you want to do is "slug the barrel". DO NOT screw around driving or pulling anything more than a cleaning rod through your barrel I would try another float tube, install it with a known torque value, and not lean on it with a cheater bar...
  6. S

    Customizing Tikka...

    Re: Customizing Tikka... OP, Did you free-float the barrel? There is a support like an arch about 2" back from the front swivel which Sako/Tikka thinks should be there. I have never had any luck going for groups unless a barrel was free-floated. Takes a few seconds with a dremel tool. You...
  7. S

    The Garand, heavy bullets, and slow powders: Quest

    Re: The Garand, heavy bullets, and slow powders: Quest Mr Humble has it right.
  8. S

    Rifle Scopes EGW Rem 700 S/A bases?

    Re: EGW Rem 700 S/A bases? Bought their picatinny rail for my Rem 7600 pump and it is super quality, fits right, well engineered. Have been intending to buy base for tikka t3 and win70 sa. Bought my base 3 yrs ago on Ebay where they also sell. Recommended Great Value for the money, or when...
  9. S

    Rifle Scopes Good mount for AR10 for 1,000 yrds

    Re: Good mount for AR10 for 1,000 yrds Might also get out your trusty scope collimator and see if you even need a sloped base. Badger Ord does make one, btw. I use a 4.5-14x Leupold 50mm on my 10T and don't need a riser or a sloped base. The scope has 100moa of vertical adjustment which is...
  10. S

    Rifle Scopes Anyone reviewed March Tactical scopes yet?

    Re: Anyone reviewed March Tactical scopes yet? http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=1030346&gonew=1#UNREAD
  11. S

    Rifle Scopes Need a New Spotting Scope

    Re: Need a New Spotting Scope I own two sets of Zeiss binos. My spotting scope is a Fujinon. I owned a Kowa 60mm w/45deg 20-60x viewfinder which was a great value. I was able to watch sheep in a mountain glenn at 5-8mi and id (albeit roughly) the different rams, ewes and lambs with the...
  12. S

    Rifle Scopes tps products

    Re: tps products <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ranger1183</div><div class="ubbcode-body">...The guys at Badger Ordnance bent over backwards to replace a set of rings that I had personally screwed up. I mean, I was a real dip-shit in over...
  13. S

    Rifle Scopes Mark4 Factory Zero = more ups than downs?

    Re: Confused about internal moa adjustments? I always thought the "erector" was the conveyance which responds to the power/magnification ring movement. A lens moves in/out on a worm-drive to yield a higher lower magnification. Power ring moves the worm-drive, which moves the lens...
  14. S

    Rifle Scopes Trijicon Reflex sights.

    Re: Trijicon Reflex sights. I have a couple of RXII sights with the 12.5 moa triangle. Very decent, triangle reticle w/polar filter works ok. Use these with carry handle mount and they are fast reacting and work fine through the A2 sights. Lightweight, no batteries, triangle reticle enables...
  15. S

    How can I tell if it is a good AK-47?

    Re: How can I tell if it is a good AK-47? How can I tell if it is a good AK-47? Dump it in a puddle of pig shit, run over it with a large tractor a few times. When you pull it out of the muck (If you can find it) blast a few 40rd mags and know that you've gotten the best rifle ever...
  16. S

    Rifle Scopes New U.S. Optics 1.5-6x

    Re: New U.S. Optics 1.5-6x Can't see the huge ocular lens group enabling function on an A3/A4 AR-15. The lens is a couple inches behind the receiver which means the scope has zero eye relief or the shooter is not using the stock on his/her shoulder? A LaRue extension mount undoubtedly...
  17. S

    Rifle Scopes tps products

    Re: tps products I have about 9 sets of Tactical Precision rings, both aluminum and steel, both 1" and 30mm. They are excellent quality and value. I buy from Brownells and have never had an issue about service or return hassle. I sold 3 sets of Badger ord rings after getting my first...
  18. S

    Movie Theater Looking for new Authors

    Re: Looking for new Authors Was going to mention Jerry Pournelle and Larry Niven. As a combo team or as solo authors. Pournelles compendiums There Will Be War are pretty interesting. Lucifer's Hammer is the best survivalist novel ever written. Also have to love Frank Herbert's Dune at...
  19. S

    Movie Theater Looking for new Authors

    Re: Looking for new Authors Maybe I am feeling argumentative tonite? I just wrote a review of the Stephen Hunter Swagger book series. I am disappointed, actually purely disgusted with the scummy shit these authors work into the plots to pander sexually and degrade their readers. I read...
  20. S

    Rifle Scopes Optics for a Stoner SR-25

    Re: Optics for a Stoner SR-25 I have a GAP AR-10(T). First thing I did was get rid of the Magpul stock. Too damn heavy. Next thing was to sell the Badger riser and mill away about 8 slots on the Badger Ord handguard. I use a Leupold 4.5-14x 50mm TMR because it is light, and compact...
Top Bottom
Back
Home
Forums
Merch
Alerts